Related
here we going to share on how to customize the PPC after doing Hard Reset.
Normally after Hard Reset, There are clean n nothing inside. So how to add some files inside so that next time if I do Hard Reset. Only the selected new files will automatically installed. How do we do that ?
Thanks.. :lol:
as i looked carefuly to the files in the extrom, there is a file "config"
so i asume when you create cab's for ppc and place them in the extrom and add a line to the config like te other's.
willumpie82 said:
as i looked carefuly to the files in the extrom, there is a file "config"
so i asume when you create cab's for ppc and place them in the extrom and add a line to the config like te other's.
Click to expand...
Click to collapse
do u know how to create cab's and put it into extrom ?
I just hard reset my magician. Since i'm using big storage (my friend did it), only some of the cab files from extended_rom are installed. Now i just found out that my smart dialing, MMS, O2 plus are not included. It was easy to recover those programs since i know the cab files.
However, i cant find the right cab for "Running Programs". Does anyone know which one? Thx.
Sorry for the bad language
Running programs - do you mean in Settings > system > memory > running programs?
If you need a task killer I can send you one or there's many around.
V
That's the one. Thx . So actually it's not a stand-alone program. Yes i found the running programs.
So, the question is changed now. I need the shortcut to that program. Usually magician has the blue box icon with a picture of someone running. Do you know the shortcut?
Thx.
Just tried to restore that icon from my old backup before it crashed. I thought it was just only a link to some program. But it is not! It is an exe file and after i restored it, click the Running Programs, it says "Error opening the shortcut or locating the target filename".
Any clues?
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
What does that file do? Just open up the running programs control panel?
If you need it back, just type the following into a text file on your PPC
Code:
22#ctlpnl cplmain.cpl,4,2
and save it as Memory.lnk
Then double click on that file.
Tell me if it works ok.
V
@vijay
i just wanna return my magician to the default system . that's why i'm so curious to get back that program.
@ampda
i'll try that file. thx for the info.
I can post my CAB file but it will also add the O2 xda defaults that can with the Aussie unit
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
THANK YOU!!! finally i can access my running programs.
anyway, ive another question . let's say i want that program to be installed automatically after I hard reset. how can you do that? so i do not have to restore them manually from my sd card. thx.
dinoalbert said:
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
Click to expand...
Click to collapse
To get the menu and icon run O2Auto.sa.CAB, then install the telco(s) you want to be in the autoconfiq menu.
@nsriza, thanks!!! As simple as this, and I can have my Autoconfig back already?
I thought I need to manually edit the autoconfig.txt to change the paths of the cab files?
Btw, I have already installed the cab files for all the Telcos that I need....but not the O2Auto.sa.CAB yet. Is it okay if I install that O2Auto then install again the Telco cabs?
Thanks...
So has anyone knew how to setup auto installation for cab files (eg. MMS, SmartDialing etc) after hard reset? thx
another OOT question...what does autoconfig.txt and config.txt do? and how to use it?
thx
Im assuming your asking for auto installation for after a hard reset using big storage. if you search for "AutoRUn" on this forum you should find a link on how to create an autorun folder on your storage card. you need the autorun.exe (Found in the search for the link) and a folder called 2577 created in the root directory of your storage card. then all you need to do is add all the CABs that you want to auto install after a HR to a ZIP (not Rar) archive and call that archive extROM.zip. then put that in your 2577 directory and hardreset and it will install all the files in the zip. if you havent already installed the cabs you put in the zip it will actually start installing them as soon as you insert the SD card. have a search around you will find lots of info about this subject.
SpeedN
@Speedn
thx for the suggestion. it's very helpful.
@rockafeller
hi i used big storage to convert my german rom (o2 xda mini) to wwe 1.12. now i lost some features like MMS,Smart dialling, Home zone control, O2plus. (as it was the case with you). It would be great if you could share here how did you get them back to work? i mean, i want the procedure to do so. i have a backup of my german rom.
one more question. i dont see the Phone pad option in my text input list after the bigstorage patch. how can i get it back. any suggestions would be so great..
thanx in advance
kk
@visvaram
if you backup ur extended_ROM, u should able to find related cab files, such as MMS**.cab, SMARTDIALING**.cab. Just tap those files and it will be installed automatically. FYI, backup ur cab files first b4 installing.
Im not sure about O2plus and zone files. Anyone care to help?
Im trying to upgrade my jammin with the latest dopod rom ..Ive got hold of the romupdateutility.exe which bypasses the vendor id but now when i run the .exe it comes up with the error
'ERROR [240] File open'
As anyone got any ideas as to solve this problem?
Ive also tried the awizard tool but my jammin never seems to reset?
Any ideas would be great.
Thanks in advance
Ive managed to get the awizard tool to work and does reset the jammin but when i go then to install the dopod rom update in bootloader mode it comes up with ivalid provider id error ...... :? :? :? :?
Download and install WinRAR
Right click on the ROM you downloaded,
Extract the files to one folder.
In this folder, you will find 2 folders. You need to copy the files from both folders into one folder only.
Replace the RomUpdateUtility.exe as needed.
Double click on it and go.
27 said:
Download and install WinRAR
Right click on the ROM you downloaded,
Extract the files to one folder.
In this folder, you will find 2 folders. You need to copy the files from both folders into one folder only.
Replace the RomUpdateUtility.exe as needed.
Double click on it and go.
Click to expand...
Click to collapse
I try to update I-mate with the last Dopod ROM using this method and it doesn't work. I get invalid vender ID error.
OK.
You want this ROM
http://www.dopodasia.com/download/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
and this utility
http://forum.xda-developers.com/download.php?id=10811
27 said:
OK.
You want this ROM
http://www.dopodasia.com/download/RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
and this utility
http://forum.xda-developers.com/download.php?id=10811
Click to expand...
Click to collapse
Oh, thank you... I was trying to use romupdateutility from I-mate pack. Now it works.
27 said:
Download and install WinRAR
Right click on the ROM you downloaded,
Extract the files to one folder.
In this folder, you will find 2 folders. You need to copy the files from both folders into one folder only.
Replace the RomUpdateUtility.exe as needed.
Double click on it and go.
Click to expand...
Click to collapse
Brilliant thanks alot thats where i was going wrong i wernt extracting both folders into the 1 ...Updating now
Thanks alot been pulling me hair out all day
You should expect the process to pause at 80% and 95%. Fear not, it will run its couse to 100%.
The new ROM is a lot faster. Try starting and stopping Blutooth. You'll notice the change in speed.
hmmm seem to have a problem where it stops at 46% and comes up with communication error 302 and wont go no further telling me to try a recovery :?
J273 said:
hmmm seem to have a problem where it stops at 46% and comes up with communication error 302 and wont go no further telling me to try a recovery :?
Click to expand...
Click to collapse
Hmm.
Are you using the ROM and Utility I told you to?
Im just downloading them agai nmate and ill post back.....ive just read the info that comes with it and error 302 is pretty serious i think and may need to send it to imate...hope not
so u know how you said extract all the files to 1 folder ....Ive got 2 folders when i unrar them :
1 called Output file with the NBF file in...... and the other is called RUU_Tools -> Prophet -> WWE ->and then after WWE i reach all the other files with romupdate utility all these files in here do these need to be in 1 folder along with the nbf file and does it matter what i call the folder i copy them all into?
If you get what i mean
So ill have all in 1 folder
Enterbootloader.exe
Readme.doc
Romupdateutility.exe
RUUgetinfo.exe
RUUResoource.dll
nk.NBF
Thanks
Jamie
J273 said:
so u know how you said extract all the files to 1 folder ....Ive got 2 folders when i unrar them :
1 called Output file with the NBF file in...... and the other is called RUU_Tools -> Prophet -> WWE ->and then after WWE i reach all the other files with romupdate utility all these files in here do these need to be in 1 folder along with the nbf file and does it matter what i call the folder i copy them all into?
If you get what i mean
So ill have all in 1 folder
Enterbootloader.exe
Readme.doc
Romupdateutility.exe
RUUgetinfo.exe
RUUResoource.dll
nk.NBF
Thanks
Jamie
Click to expand...
Click to collapse
Yes, you'll take them all and put in one folder.
You'll replace the utility from the ROM with the one in my link above.
It doesn't matter what the folder is called.
ok mate yea done that and its still doing the same hopefully ill figure it out
J273 said:
ok mate yea done that and its still doing the same hopefully ill figure it out
Click to expand...
Click to collapse
VNC?
Ive managed to flash back to the latest jammin rom....Ill have another go wit h the dopod rom
Whats VNC :?
J273 said:
Ive managed to flash back to the latest jammin rom....Ill have another go wit h the dopod rom
Whats VNC :?
Click to expand...
Click to collapse
Login to the forum and check your messages.
I have a JAMin with a DOPOD AKU2 image on it.
I want to put an imate ROM back on it.
I extracted the JAMin files into one folder, replaced ROMupdateutility.exe with the one in the link but it fails at 95% with this error:-
ERROR [326]: INVALID COMMAND
This NBF file cannot be used for your PDA Phone. Please check your NBF file.
yea im tryin to get back to imates rom and have exactly the same problem get to 95% then get the above error
Hello forum
I want to upgrade my phone HTC Amadeus to WM 6. Now I'm using 2003 SE.
But I read in this forum, 3 music buttons can not work if I upgrade my smartphone to WM 6.
Can anybody tell me how to make music buttons work on WM 6?
Regards,
You can TRY, backup your keyboard/keypad dll and all the shortcut buttons which is Short_AP1, AP2, AP3 and AP4 , then in the end when you flashed WM6, paste back those files there.
Wonder if it will ever work, the reason it doesnt work is because of the dll file
Can you tell me how to do that?
Find that file in your windows folder, backup it, then after you have flashed, copy it back to your phone windows folder
i've found keybddr.dll in amadeus wm5 (with working media buttons), but how can i copy it from /windows folder? it seems to be kinda copy-protected.
just managed to unpack wm5 amadeus firmware, and i've found 'keybddr.dll' folder in /windows. here it goes: http://www.mediafire.com/?1hbtwz1mmvm
Does it work?
karhoe said:
Does it work?
Click to expand...
Click to collapse
what is the procedure for importing the dll pleasE?
SFC said:
just managed to unpack wm5 amadeus firmware, and i've found 'keybddr.dll' folder in /windows. here it goes: http://www.mediafire.com/?1hbtwz1mmvm
Click to expand...
Click to collapse
how do i use this keyboard.dll folder? will i just copy the extracted folder to my \windows folder after flashing wm6?
iamwin said:
how do i use this keyboard.dll folder? will i just copy the extracted folder to my \windows folder after flashing wm6?
Click to expand...
Click to collapse
i don't know. you tell me.
either we should somehow compile this folder to a single .dll file, or someone gotta tell me how i can extract this file from another htc amadeus device with wm5 rom.
I have the same Problem! - Please Help.
Temporary Solution
You could use this as a temporary solution.
Put the four link files into your (windows\keys) directory and you will get Short press IE button as IE, Long press IE button as backward, Short press backward button as play and Long press backward button as forward.
Now you can try this Rom : http://forum.xda-developers.com/showthread.php?t=364399
how do i install files in a folder and out of the folder is registry file?
when i down load a file. some of them come not as a cab file but it comes it contains a folder and a registry file out of the folder. i believe folder contains program file. where do i put which and where? can u help.
tazwik said:
how do i install files in a folder and out of the folder is registry file?
when i down load a file. some of them come not as a cab file but it comes it contains a folder and a registry file out of the folder. i believe folder contains program file. where do i put which and where? can u help.
Click to expand...
Click to collapse
What are you trying to install?...and where? I am sorry if I am miss understanding you but it sounds like you have a file with a reg file and another folder named files? is this right?
something like that. when i down load a file its not a cab file.it is a zip file. when i unzip. it has a folder with program with some files in the folder, but out of the folder or root directory there is 2to 3 files look like reg file. i do not know where to place these file.
tazwik said:
something like that. when i down load a file its not a cab file.it is a zip file. when i unzip. it has a folder with program with some files in the folder, but out of the folder or root directory there is 2to 3 files look like reg file. i do not know where to place these file.
Click to expand...
Click to collapse
Could you link me to the file so I can see it?
im tryin to install it in to my htc hd2 phone. its a program i downloaded. from xda. like camara hack. ther is a folder and files on the root directory. in the folder though there is a camara icon or program.
tazwik said:
im tryin to install it in to my htc hd2 phone. its a program i downloaded. from xda. like camara hack. ther is a folder and files on the root directory. in the folder though there is a camara icon or program.
Click to expand...
Click to collapse
Post the file or link me to where you got it please. I want to make sure I give you good info so it works.
sounds like a cracked app, where you get the prog folder and a reg file to crack it.
samsamuel said:
sounds like a cracked app, where you get the prog folder and a reg file to crack it.
Click to expand...
Click to collapse
I thought so as well till he\she said they got it on xda, that made me think maybe a kitchen ext package
The cab files can be opened with winzip on your PC. The contents of a cab file is usually an xml file, icon file and other files for installation. Are you sure you are not opening a cab file in winzip?
zelendel said:
I thought so as well till he\she said they got it on xda, that made me think maybe a kitchen ext package
Click to expand...
Click to collapse
ahh yea.that makes sense.
ok for example. forum.xda-developers.com/showthread.php?t=611007
CUSTOM-djet-CameraSettingsPatch , it is a rar file costum patch. when i down load it has a folder and a files where do i place the folder and where do i place the files on my THC HD2
Thats an OEM package for use in kitchens when cooking ROMS. You cant install it to a running system. (Well, not in that form anyway)
tazwik said:
ok for example. forum.xda-developers.com/showthread.php?t=611007
CUSTOM-djet-CameraSettingsPatch , it is a rar file costum patch. when i down load it has a folder and a files where do i place the folder and where do i place the files on my THC HD2
Click to expand...
Click to collapse
I made the files into a cab for you.
zelendel said:
I made the files into a cab for you.
Click to expand...
Click to collapse
What does that one do exactly?
sirphunkee said:
What does that one do exactly?
Click to expand...
Click to collapse
From the look of the reg it enables one of the hidden functions in the camera. I thought most cooks enabled all the functions when they cooked up the rom but could be wrong. I know I do
zelendel said:
From the look of the reg it enables one of the hidden functions in the camera. I thought most cooks enabled all the functions when they cooked up the rom but could be wrong. I know I do
Click to expand...
Click to collapse
Gotcha, thanks man! Just wanted to be sure I wasn't missing anything I don't already have
icons
can u help me with one more thing. i downloaded some icons. it does not have any other files but icons and album file. when i place the file into the windows directory. gives me an message that it can not be overitten due to not enough space and file is being used. how do i change go around it.
thks jelendel. for making file in to cab.
similar problems/questions
most cab files/apps i download and install are very straight forward and I save to storage card and there are right there on my "start" screen. others I download and I cant find them? I look through the file explorer but either cant find them or dont know what to do if I do find the file.
example, egg timer 1.0 -I can find it listed on "remove programs" page page so I know I got it. but how do I get it to a more 'usable' location.
another example. I want to get the Bluetooth toggle (BTtoggle) from pocketnow site. I downloaded the app, then it says I need to edit my registry (I understand the dangers of this) at
"HKLM\software\HTC\Manilla" and change the value of HomeLSKPath to the path to your BTtoggle.exe .....etc.....
First time editing registry, so sounds like I need to get a registry editor. I looked for a free one. CeRegEdit version 5.2.exe file. looks like it downloaded ok but I cant find on device??
LASTLY, I use CoOkies home editor and I really like it, but does that mean I cant do other changes/app installs to any HTC sense items/lock screen/home screen/etc? thanks for reading this far....steve
Or if you know of easier to get bluetooth toggle or any kind of timer applications so I dont burn food at the fire station, feel free to reccomend...Thanks
808Granato said:
Or if you know of easier to get bluetooth toggle or any kind of timer applications so I dont burn food at the fire station, feel free to reccomend...Thanks
Click to expand...
Click to collapse
Aloha, and just because you're in civil service like that, I'll give you a hand with this one here...but it's usually best to open a new thread with a bunch of questions like that. You can just edit your post above to just say "moved to new thread", and then copy all that you wrote into a new thread you start...you'll probably get more views/responses that way too
These cabs will give you a toggle for bluetooth, wifi, and a reset button. Once you run the cab, you can find them in your start menu, but they're most useful when you assign them to one of the quicklink spots (on your home tab), just like you would any other program.
P.S. you'll find a lot more useful stuff for your new phone right here in these forums, and 99% of it is free, and known to work on the HD2 (unless stated otherwise). Start HERE and HERE