Customizing Techniques - JAM, MDA Compact, S100 General

here we going to share on how to customize the PPC after doing Hard Reset.
Normally after Hard Reset, There are clean n nothing inside. So how to add some files inside so that next time if I do Hard Reset. Only the selected new files will automatically installed. How do we do that ?
Thanks.. :lol:

as i looked carefuly to the files in the extrom, there is a file "config"
so i asume when you create cab's for ppc and place them in the extrom and add a line to the config like te other's.

willumpie82 said:
as i looked carefuly to the files in the extrom, there is a file "config"
so i asume when you create cab's for ppc and place them in the extrom and add a line to the config like te other's.
Click to expand...
Click to collapse
do u know how to create cab's and put it into extrom ?

Related

CAB files in Extended_ROM

Which CAB files listed in Extended_ROM on the IMATE XDA2 represent the Arabic software (which I'd like to delete)?
Also, none of the operators listed at boot up are the ones I'm using. Is that customizable?
Finally, if I copy other CAB files to this ROM will they also be installed on a hard reset?
adamz said:
Finally, if I copy other CAB files to this ROM will they also be installed on a hard reset?
Click to expand...
Click to collapse
You need to modify the config.txt file to have Your files installed too.
Have a look on the file to understand how it works.
regards Jens

Ext Rom Customisation

Hi All,
I am meddling with my ext rom. I am setting it to auto install s/w upon hard reset. it works fine. I found out that when i hard reset the pda and phone volume is set to half. How do i make it to full ? Also, i would like to know
how do i move some files to some other folders. eg: ringtones, etc.
One option is to use the CAB Wizard and create a Small CAB File with your settings for Registry - Cab wizard allows you to put files into specific folders etc and all this you can do without writing ONE SINGLE LINE OF Script.
Another option is to do it via script :
In the config.txt you can add the lines :
CPY1:\Extended_ROM\CabInstall.exe
CPY2:\Windows\Start Menu\Programs\CabInstall.exe
Means the Cabinstall.exe will be copied from the extended_Rom to the Programs folder in Windows\Start Menu.
The Registry keys you can check out on the link :
http://wiki.xda-developers.com/index.php?pagename=BA_Hacks
If they are not there - PM me and I shall send them to you...
Rgs/DD
thanks! I downloaded the PHM Reg editor and followed the instructions under Microsoft Application Installer -> Changing the setting so that it asks you where to install a cab on the link above..
It worked.. my ipaq now ask me where to install the cab files!
brilliant... thanks again!

Guide to Cooking Universal Extended Rom with FILES

Hello,
I have read that some people have been having a bit of trouble with customising their extended rom on the Universal. So here is my attempt at creating a guide, as a way of saying THANKS to all who helped me in these forums to create my own customised ROM's on the blue angel and my current EXEC.
First thanks mainly to Buzz for the Ext Rom Unlocker and also to BeyondTheTech for the Disable Security Cab.
Also thanks to all other members who contributed their trials and files in the thread.
IMPORTANT - DO A BACKUP BEFORE DOING THIS AS A HARD RESET IS REQUIRED!!!!
Here Goes:
This is how i did it:
1. I created a folder on the desktop called Exec, and inside i created 2 folders called Orig Rom and Cooked Rom
2. I then downloaded the following 3 files and placed them into the Exec folder.
3. i copied the unlock policies and the ext rom unlocker onto sd card and copied them to the phone.
4. i ran the unlock policies cab first then the ext rom unlocker cab
5. under programs i clicked on ext rom unlocker to execute the file
6. it then said succesful and reboot to finsh
7. once rebooted install total commander from below.
8. i then ran total commander and typed in /extended_rom (note underscore) and it displayed the contents of the exteneded rom that originally came with the phone.
9. selected it all and copied the contents to SD card.
10. if you connect your phone directly to pc then you can copy the contents directly to the 'orig rom' folder you created earlier, or use card reader to do same.
11. either way you have the contents of the ext rom on the pc. i then deleted the contents of the Extended_Rom on the phone.
12. the next steps are done on the pc.
13. copy the autorun.exe and the config.txt file from the 'orig rom' folder to the 'cooked rom' folder.
14. copy all the CAB files that you want to be installed upon hard reset into the cooked rom folder aswell.
15. copy the disable security.cab file into the 'cooked rom' folder aswell
16. you will need to rename the cab files that you want installing in the following format:
Default_Unsigned_xxxxxx.cab where xxxxxx is the name of the file
17. if the cab files have long names then just rename them!
18. if you wanted to keep some of the original cabs from your extended rom then copy these into the 'cooked' folder aswell but leave their naming system alone ie:
Signed_UNI_Remove_BatteryIcon.sa.CAB
19. once these have been named as above open the config.txt file
20. it needs to be prepared into the following format :
LOCK:Enabled
CAB: \Extended_ROM\Default_Signed_DisableSecurity.CAB
CAB: \Extended_ROM\Default_Unsigned_tcpmp.arm_ce3.cab
CAB: \Extended_ROM\Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
CAB: \Extended_ROM\Default_Unsigned_Porta-Pinball.CAB
RST: RESET
this is an extract from my config.txt file
21. i used the existing file and amended the entries, add/deleted some of the entries.
22. note the space between Cab: \ this is important.
23. also note that the first file that i wanted to install was the disablesecurity.cab file, without this the other 'personal' cabs will not install.
24. so once you have edited and saved your config.txt files making sure all spelling is correct (also an important thing otherwise the files dont install) and no warnings are issued either! you will have in your 'cooked rom' folder:
autorun.exe
config.txt
and several cab files
25. select all the files and then 'right click' on properties.
26. select the 'read-only' option and ok
27. i found that after the first install some of the cab files delete themselves! this prevents that from happening.
28. connect your phone to the pc
29. using active-sync Explore device and navigate to the Extended_Rom folder
30. copy all the contents of your 'cooked rom' folder into the Extended_Rom folder
31. once completed, disconnect the phone and perform a hard reset.
32. after you have aligned screen and done the start-up routine it will start installing your personallised cab files.!!
33. You should now have an Exec, customised with your own extended rom and as a bonus a complete back-up on your pc.
34. if ever you upgrade the phone rom/radio etc, all the software you need and the perosnlaised rom is ready to go.
if i have missed a step plz post back and i will edit my posts and put in there.
I cannot stress how important it is that you make a backup first before doing this as you will lose everything on the phone.
Bye for now!!!
Gr8 Work!!!
hi there this is a perfect guide well done m8
only one question as i have the jasjar and i-mate rom on it
i do not have the config.txt file
how do i tell the device to install my personal/third party cab files
thanx in advance
mail attachments
Thanks for the guide, however when i use total commander, extended rom is shown with the same symbol as storage card and I cannot get the mail programme to save attachments to the real storage card as the universal thinks the extended rom is the storage card.
How can the properties of the extended rom be changed so it does not appear to be a storage card ?
Thanks
Steve
Re: Gr8 Work!!!
krassen said:
hi there this is a perfect guide well done m8
only one question as i have the jasjar and i-mate rom on it
i do not have the config.txt file
how do i tell the device to install my personal/third party cab files
thanx in advance
Click to expand...
Click to collapse
i have the same problem, any solution?
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Re: Gr8 Work!!!
majdi said:
krassen said:
hi there this is a perfect guide well done m8
only one question as i have the jasjar and i-mate rom on it
i do not have the config.txt file
how do i tell the device to install my personal/third party cab files
thanx in advance
Click to expand...
Click to collapse
i have the same problem, any solution?
Click to expand...
Click to collapse
I just renamed the required cab file by adding "Default_" to it. That did it.
Thanks
But I have been through the thread numerous time.
The mail programme thinks the extended rom is the storage card.
The thread has a fix to hide the extended rom so the mail programme now saves attachements onto the real storage card.
It just seems a shame to have gone to all the trouble to unlock and make visisble the extended rom, just to hide it again so the mail programme can save onto the real storage card.
Am I missing something. Simple guidance PLEASE.
Steve
hollytree said:
Thanks
But I have been through the thread numerous time.
The mail programme thinks the extended rom is the storage card.
The thread has a fix to hide the extended rom so the mail programme now saves attachements onto the real storage card.
It just seems a shame to have gone to all the trouble to unlock and make visisble the extended rom, just to hide it again so the mail programme can save onto the real storage card.
Am I missing something. Simple guidance PLEASE.
Steve
Click to expand...
Click to collapse
When the hard reset is done the whole point is for the Extended Rom to be hidden again. This ensures that at any point in the future if a hard-reset is required then the phone is setup agian as you want it.
At the moment the Extended_rom partitrion cannot be used as a storage space , and i believe Buzz is working on that.
So my guide illustrates deleting existing rom, and replacing with personalised rom and then hiding it agian.
Above this thread is a link to Buzz's small tutorial to alllow attachemnts to be saved back to storage card instead of the Extended Rom for those who want to leave it Un-Hid.
Regarding those without a config.txt file then renaming everything to Default_xxxxx.cab does the trick.
thanks
This is a GREAT thread. Hats off to you.
Personally, I think I'm going to add the T-Mobile USA Internet Settings cab to "cooked" stuff (I'm in the US).
Does anyone have a cab that will set up the gmail pop settings (w/ generic un/pass of course)? Lazy, yes, but I'm just trying to make any refresh that I would ever need to do that much simpler
i have another question as we have a lot of good registry tweaks....
is it really that hard to create cab files for those registry settings and just throw those in the extRom
regards
krassen
flippy said:
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Click to expand...
Click to collapse
my problem is that in wm5.0 there is no config.txt file to tell the os what to install from the ext rom, i unlocked the ext rom and moved all contents to pc, i also deleted all the existing files from it, and i have all my cabs ready, but the problem is how to tell the installer to take these cabs instead of the origionals?
does it take it automatically, or should i do something to make it install my personalised ext rom?
majdi said:
flippy said:
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Click to expand...
Click to collapse
my problem is that in wm5.0 there is no config.txt file to tell the os what to install from the ext rom, i unlocked the ext rom and moved all contents to pc, i also deleted all the existing files from it, and i have all my cabs ready, but the problem is how to tell the installer to take these cabs instead of the origionals?
does it take it automatically, or should i do something to make it install my personalised ext rom?
Click to expand...
Click to collapse
If you dont have a config.txt file then you need to rename your cab files in the following format:
Default_xxxxxx.cab where xxxxx is the name of your file. this has been found to work in your phone.
thanks
many thanx to u.
this worked just fine.
cheers
disable security cab
Does anyone know where I can download the DisableSecurity.CAB as the links no longer work.
Thanks
Steve
Re: disable security cab
hollytree said:
Does anyone know where I can download the DisableSecurity.CAB as the links no longer work.
Click to expand...
Click to collapse
Did you try the first post in this thread?
You have to register and be logged in to see the files...
links worked for me
l6cum said:
majdi said:
flippy said:
the solution to that can be found here:
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=40&id=7869#7869
Click to expand...
Click to collapse
my problem is that in wm5.0 there is no config.txt file to tell the os what to install from the ext rom, i unlocked the ext rom and moved all contents to pc, i also deleted all the existing files from it, and i have all my cabs ready, but the problem is how to tell the installer to take these cabs instead of the origionals?
does it take it automatically, or should i do something to make it install my personalised ext rom?
Click to expand...
Click to collapse
If you dont have a config.txt file then you need to rename your cab files in the following format:
Default_xxxxxx.cab where xxxxx is the name of your file. this has been found to work in your phone.
thanks
Click to expand...
Click to collapse
It's shuld be Default_xxxxxx.cab or Default_Unsigned_xxxxxx.cab / Default_Signed_xxxxxx.cab, now ?

WHERES EXTROM LOCATED ... ? ? ?

HEy ...
WOULD SOMEONE LIKE TO TELL ME WHERES EXACTLY EXTROM LOCATED AFTER UNLOCKING & UNHIDING EXTROM ?
M TIRED OF SEARCHING ...
TELL ME THE EXACT FOLDER, PATH ...
REGARDS ...
*§HaH§*
Go to your windows folder, look for LoadVDisk.exe, execute it and you'll see your Extended_ROM folder at your root directory. It'll be gone after a soft reset and you'll have to repeat the same to see it again.
can't find the file :?:
madhopper said:
can't find the file :?:
Click to expand...
Click to collapse
It is there. Make sure you have selected "view all files" in file explorer
I didn't know that there was an EXT ROM unhider for the Alpine.
:?: I found the LoadVDisk.exe but it's can't execute. Pls help!
Just double click on it, it doesnt do anything, and go back to your root directory and you should see your EXTROM folder...

How to replace my Ext_Rom with another one!!!

Hi Guys
Is there anybody who can guide me if it is possible to replace the Ext_Rom of a WM6 with WM5 or not?!!!
Actually I had a problem with my Ext_Rom...(There's a CLEARVUE...a default program for Reading PDF files which I hate it,but I can't prevent it of being installed while costumization of WM5 ) So I wondered If I can change My Ext_Rom with the one whcih has not Clearvue inside?
If yes,then how???
Thanks
Easy.
Go to the WiKi and search for "unlocking extended ROM of Prophet".
The extended ROM is just a collection of cabs. On the Prophet (at least in WM 5 not sure if they changed it in WM 6) you can open it with a simple registry change and then manually delete or add cabs. (note that cabs must be signed to automatically install after hard reset)
I looked over the backup of my Ext_ROM (from official i-mate ROM) but could not determine which cab installs ClearView just by their names.
You could always try them manually one by one or use CECabManager (google) to see whats inside.
levenum said:
Easy.
Go to the WiKi and search for "unlocking extended ROM of Prophet".
The extended ROM is just a collection of cabs. On the Prophet (at least in WM 5 not sure if they changed it in WM 6) you can open it with a simple registry change and then manually delete or add cabs. (note that cabs must be signed to automatically install after hard reset)
I looked over the backup of my Ext_ROM (from official i-mate ROM) but could not determine which cab installs ClearView just by their names.
You could always try them manually one by one or use CECabManager (google) to see whats inside.
Click to expand...
Click to collapse
Hi Levenum
It's really great to have someone to help you,finally.Thanks a lot,man .Actually I know how to un-hide the Ext_Rom,but the problem is that I can't find the cab that is installing this damn Clearvue program
I'm looking for someone who guide me which Cab is responsible for that(Gives me the name of the cab.file)...or....Any hero who guide me is it possible for me to change my current Ext_Rom with the another one that is not included that damn CLEARVUE???!!!
Thank you again for helping
Heloooooooooooooo
Isn't there anybody who direct me (and many others who have got the similar problem) by just saying how we can get rid of CLEARVUE in the Ext_Rom or at least replacing it with ACROBAR READER?
I already know how to un-hide AND Unlock the extended rom...
I need only the name of the cab file (which installs CLEARVUE),...nothing more...
It's NOT installed in the ExtROM, it's installed in the "base"ROM.
Black-Rose said:
It's NOT installed in the ExtROM, it's installed in the "base"ROM.
Click to expand...
Click to collapse
Hi Black Rose
I don't care where this damn software is,and I'm not gonna debate you over it...You just tell me what s the name of the cab.file...And if you are so sure about the location,so tell me also the place of it(Base or Ext-Rom?? )
Thanks anyway
I think clearvue is pre-installed in the base ROM, so there is no cab file to delete.
For me, I just ignore that clearvue or adobe LE is there. I just went ahead and installed Adobe 2.0 and everytime I tap a pdf file, adobe 2.0 opens.
If that doesn't work for you, you can use resco explorer to assign which default prog to open any file... similar to "open with" in XP or Vista.
Putra said:
I think clearvue is pre-installed in the base ROM, so there is no cab file to delete.
For me, I just ignore that clearvue or adobe LE is there. I just went ahead and installed Adobe 2.0 and everytime I tap a pdf file, adobe 2.0 opens.
If that doesn't work for you, you can use resco explorer to assign which default prog to open any file... similar to "open with" in XP or Vista.
Click to expand...
Click to collapse
Hi Putra
Are you sure it's not in the Ext_Rom?Because after a hard reset,whenever I prevent the Ext_Rom of customizing my device (Stop customization),I don't have the CLEARVUE installed on my mobile.
This is why I think it must be somewhere in Ext_Rom.Even some excerpts told me that I have to replace my Ext-Rom with the one which doesn't have CLEARVUE...But he didn't tell me exactly how I can find such a extended Rom and how I can do the replacement...I also needed to know if the replacement may damage the Original Rom of my device or not?
Thanks for helping me, anyway and I would be more appreciated if you help me a little more in that.
Ok, in that case, then it should be in your extrom. However, I also do not know which is the cab file. One way is to prevent the extrom customization, and then manually install each cab from the extrom....
Why don't you just leave clearvue in your device, and simply install adobe 2.0? I don't think clearvue takes that much space...
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Putra said:
Ok, in that case, then it should be in your extrom. However, I also do not know which is the cab file. One way is to prevent the extrom customization, and then manually install each cab from the extrom....
Why don't you just leave clearvue in your device, and simply install adobe 2.0? I don't think clearvue takes that much space...
Click to expand...
Click to collapse
Hi again Putra
Thanks again for trying to help me solving this slight problem.You are right About the space that CLEARVUE takes,but I don't want to see in the list of my programs...I want to get rid of it thoroghly...So pleeeeeeeeeeeaseee help meeeeeeeee..... And show me the way to completely erase it from my device!!!!!!!!!
Chopin said:
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Click to expand...
Click to collapse
HI Chopin
Thanks a lot for helping me to solve this problem,but wou,d you pease elaborate a little bit more...After all,I'm a newbie!!!!!
Just tell me what's this WINIMAGE and also tell me if I would be able to find the cab file of CLEARVUE within my Ext_Rom to erase it or not?!?!
Thanks again
winimage to use with extension.nb, as anewbie let forget how to use this one. if you need to kow, use search you;ll find a lot about how to use this one.
just look in the folder and remove it, or just edit the file Config.txt and remove the cab you don;t wanna install, it is so easy and don't need any clarification.
tell me what ROM do you use
Chopin said:
you can edit the ext_ rom by editing the folder content in WM6
I recomend to use winimage to edit extrom, it will lock the ext rom
Click to expand...
Click to collapse
OFF TOPIC: Hi Chopin, can you explain how I can edit the contents of the extrom on WM6?
edit the files. delete any cab you want and instert anycab you want in the folder, but if you add a cab file then edit the file config.txt and and enter the cab file in it
Chopin said:
edit the files. delete any cab you want and instert anycab you want in the folder, but if you add a cab file then edit the file config.txt and and enter the cab file in it
Click to expand...
Click to collapse
Oops, I meant how do I unlock and unhide the extrom in WM6. What prog do I use?
The last time I tried using WM5 tools on PdaViet 01, it didn't work. I have not tried again. I'm on Gullum v6, btw.
if this is what you want here is the files for unlock, and please ask me more if this was not what u needed
Ok, thanx. I'll try them...
Stop off-topics...let's talk about main topic
Hi dear friends
I noticed that we have been a little been off-topic,so I wanted to recall that we are here to help each other to find a way for "HOW WE CAN DELETE ANY CAB(In my case...CLEARVUE's cab file)INSIDE THE EXT_ROM OR CHANGE IT WITH ANOTHER CAB(Again in my case changing default CLEARVUE with ADOBE ACROBAT)?????
My friends
I even checked the Config.text file within my Ext_Rom,but unfortunately even there was no name and trace of CLEARVUE?!?!!??But I' sure it must be there...since when I stop my device of being costumized after a hard reset,I never see this CLEARVUE in my programs...So that means it must be somewhere in Ext-Rom..Somebody...Some hero....some know-all tell me where?????And under what name?!?!??!??!??!?!?
please, we already answer this question, to help you more, what ROM do you use?

Categories

Resources