Hello,
I own a Qtek 9100
Rom 2.17.7.2
Ext.Rom 2.17.7.102
It connects without any problem to any classic wireless router, but it won't connect to the Belkin Pre-n router (F5D8230-4 - version 1). I flashed the router with the Linksys WRT54GX firmware 1.02.06 (since it is the same chipset), but that didn't help.
The SSID is broadcasted and found by the Qtek, but no IP address is delivered (regardless if WEP key is set or not).
Does anyone have a clue what can be changed to make this working ?
BR. Frans
Same problem
I have the same problem with connecting to Belkin pre-N wifi router using my T-mobile MDA
Wizard with Belkin Pre-n router wifi problem
I found the answer. Just turn off QoS, it will connect without any problem.
Related
I have been trying to connect to my Tmobile MDA to a Pre-N router. The router is set up to do WPA-PSK with TKIP. I can get the Wizard to connect to it and I see a very strong signal strength.
However, when I try to browse using IE, I keep getting an error that I cannot get to the web page. As soon as I disable WPA and connect, I can browse. I do have the registry hacks to go to G mode. Can somebody please help me debug this problem?
Thanks,
MT
I had the same problem, and was only able to fix it by updating the Belkin Firmware to V1.1.03.
Alternatively you can reflash the Belkin Firmware with Linksys Firmware (they both use the same hardware) which makes it much more stable (and allows the Prodigy to connect. (Google Belkin Linksys Firmware to find out more about this)
It gets worse, I just upgraded my Wizard to the new AKU2 ROM and now I can't connect to my Belkin Pre-N with either WEP or WPA...
Downgraded to the old ROM and WEP is working again!
Matt
Wizard not working with Belkin pre-n router
I use WEP encryption. Could not get my Wizard to connect to the Belkin pre-n router. It was working with Netgear G router. Turned out if I turn off QoS on the Belkin pre-n router, everything works. Hope this works for y'all.
reccomendation
go to this website
http://www.dslreports.com/forum/remark,13874867~days=9999
this works
I'm having problems connecting my P3600 to a Netgear DG834GT ADSL Wireless Router with WPA-PSK security. If I turn the security off, the phone has no problems accessing the router. However, when enabled it is unable to authenticate.
It is running the latest 1.15 Rom and I have successfully connected my Imate JAMin to the same router.
Any suggestions?
mine is running fine on same router
ovsoft said:
mine is running fine on same router
Click to expand...
Click to collapse
What software version is your router running?
Versione firmware: V1.02.04
Same problem here... My router is a SiteCom WL118.
spadge007 said:
I'm having problems connecting my P3600 to a Netgear DG834GT ADSL Wireless Router with WPA-PSK security. If I turn the security off, the phone has no problems accessing the router. However, when enabled it is unable to authenticate.
It is running the latest 1.15 Rom and I have successfully connected my Imate JAMin to the same router.
Any suggestions?
Click to expand...
Click to collapse
Same devices here and no problems at all.
DGB834GT usually is the cause..it has been reported on suppressed Netgear forum
I've had the same problem with my DI-624. I can only connect if I disable all Super-G options AND use WEP instead of WPA.
wonderiuy said:
Same devices here and no problems at all.
DGB834GT usually is the cause..it has been reported on suppressed Netgear forum
Click to expand...
Click to collapse
Which forum did you see this on?
i have the same problem. i can't connect my p3600 to the network if i try to use wpa, wpa-psk, wpa2-psk encryption. if i use wep or no authentication i can connect to my router(asus wl500g deluxe with ddwrt firmware v23 sp2) without problems.
My p3600 works after I flashed the Dopod GPS enabled rom onto it.
Maybe give that a try if you are still running the HTC 1.15 ROM.
Spadge
I used to have the same problem before upgrading with LVSW!! Now it works great.
I had the same problem, but after I updated my router to the latest firmware software it connected on WPA-PSK no probs.
rabreu said:
Same problem here... My router is a SiteCom WL118.
Click to expand...
Click to collapse
I have the same modem/router.
Have you resolve the problem? [I'm sorry for my English but I'm Italian ]
I have several imate Jamin and SP5 (HTC Prophet, Tornado), and i've used them without much trouble for the last coupe of years. We used a Linksys router to connect via wifi and it worked well, but know we bought a Cisco 851w router and the devices don't connect to it. They receive the SSID, but if we try to connect to the router, it just doesn't happen.
The devices are flashed with an official i-mate WM5 ROM.
Does anyone has any idea what the problem maybe? I've read that the CCX Cisco extension has caused some problems with others HTC devices, but i don't knonw if this router uses CCX and if it does how to disable it.
Any help is welcomed.
Hi, I replaced my zyxel wireless modem router with a new Belkin N1 wireless modem router.
I configured the belkin with same wep details as old router. My wireless music steaming devide, my laptop and my Wii all connected right away - no problems - so I know the wep key etc is entered ok. BUT my phone will no longer connect.
My phone does connect ot the wireless network in my work place.
I rebooted the phone, no joy! Reset it, no joy!
I switched off the belkin and put the zyxel back on, and it connects at home.
I tried switching the belkin to broadcast G, no joy!
When I try to get it to connect to the network it shows all gren bars - so the signal is strong.
I dont use mac filtering.
Out of ideas - anybody know a solution?
Qtek 9100, win mobile 5, aku2
No answer from Wizard forum - trying here?
Hi, I replaced my zyxel wireless modem router with a new Belkin N1 wireless modem router.
I configured the belkin with same wep details as old router. My wireless music steaming devide, my laptop and my Wii all connected right away - no problems - so I know the wep key etc is entered ok. BUT my phone will no longer connect.
My phone does connect ot the wireless network in my work place.
I rebooted the phone, no joy! Reset it, no joy!
I switched off the belkin and put the zyxel back on, and it connects at home.
I tried switching the belkin to broadcast G, no joy!
When I try to get it to connect to the network it shows all gren bars - so the signal is strong.
I dont use mac filtering.
Out of ideas - anybody know a solution?
Qtek 9100, win mobile 5, aku2
emaj2 said:
No answer from Wizard forum - trying here?
Hi, I replaced my zyxel wireless modem router with a new Belkin N1 wireless modem router.
I configured the belkin with same wep details as old router. My wireless music steaming devide, my laptop and my Wii all connected right away - no problems - so I know the wep key etc is entered ok. BUT my phone will no longer connect.
My phone does connect ot the wireless network in my work place.
I rebooted the phone, no joy! Reset it, no joy!
I switched off the belkin and put the zyxel back on, and it connects at home.
I tried switching the belkin to broadcast G, no joy!
When I try to get it to connect to the network it shows all gren bars - so the signal is strong.
I dont use mac filtering.
Out of ideas - anybody know a solution?
Qtek 9100, win mobile 5, aku2
Click to expand...
Click to collapse
Can you find IP Qtek in Belkin.
But have you tweaked QTEK to G?
Hi,
No, can't see qtek IP in belkin.
Tweaked to G? - I did'nt do anything like this. do I need to? How?
I was assuming the qtek was picking up the old router via G.
Answer is in this link...
http://forum.xda-developers.com/showthread.php?p=2941902#post2941902