Anyone using D6 with an i-Blue BT GPS? Received the software this week and was initially unable to get D6 to connect to the GPS. I then tried an older AVL GPS which D6 was able to connect to on the first try. Tried the i-blue again and D6 again failed to find it but leaving the port settings in place that worked with the AVL D6 is successfully communicating with the i-Blue.
Related
Suddenly, my bluetooth gps does not work. When I use GPSInfo application, and I do the COLD Start, it just display :
$PSRF
...OK
The Magician can detect the gps device, but cant gather any gps info anymore.
It is globalsat BT-338
Please help.
Hi Gogol,
I have the same globalsat BT-338 and i experience the same problem, The only way around this was to delete the Bluetooth pairing and re-pair them. I dont use the GPSInfo application but use TomTom5 and have to do the above most times i want to use the sat nav. Pain really
Nogs
Hi,
I'n bought an Oasis Bluetooth GPS Reciever. Is paired it with my Universal according to the tomtom install guide find on this site.
Unfortunately I cant get the dahm thing to work.
Tomtom keeps saying: No Usable signal.
Anyone got an Idea?
thnx
i can't get the damn exec to pair with my quartz 880 gps receiver. i go through the connection wizard the exec picks the gps up but then loses it after 1-2 seconds. a friend has paired his sony ericsson p910i with the gps receiver, so we know it works.
i am running the latest rom.
tomtom 5.21
i have used the install details on how to install from a forum on here.
i have done a hard reset and the issue is still there?
is this a case of returning the exec? or am i doing something wrong?
Hi
Ok - installed TomTom6
First of all I removed TomTom 5, rebooted and then installed TomTom 6 as per this site:
http://ppcwarez.org/index.php
Ok - so all went well, installed inc UK map fine.
Isue is the Blutooth. I have a BT GPS. So I removed it, repaired it, entered access key of 0000, gave Outgoing com port as 6. Started TomTom , configured GPS to use another Bluetooth GPS receiver, selected com6 and they found each other. The issue is when I turn off the BT GPS unit and the restart it, TomTom wont find it the GPS unit. I have to remove it from the Bluetooth setting on the OS and repair - with the ley being the code of 0000
If I try and pair the TomTom with the TomTom Blueotth GPS reciever - it has the key symbol with 0000 in - but it wont pair. Now, this seems to have been carried over from the previous installation. Can I remove they key for this device - as this may work?
Any ideas?
Scott
i have the same bt gps you need to delete the bt partenship and call it gps only instead of bt gps that should work
Hi!
I have the same problem. Tried to rename to gps, but no luck.
Every time I turn off the Bluetooth GPS, I have to delete the partnership, redo the partnership, assign an outgoing COM port, and then finally tomtom6 sees the bluetooth gps again .....
Any clues?
Thanks.
Has anyone had problems running TTN6 on their 02 Mini S (wizard)? I have installed it but cannot get the software to pick up the bluetooth receiver. The phone sees it, pairs with it etc. I have set the ports (rightly or wrongly - not sure) but I cant get the software to 'see' the bluetooth receiver. Below is a link to the receiver I bought.
http://cgi.ebay.co.uk/ws/eBayISAPI....MEWN:IT&viewitem=&item=320090145637&rd=1&rd=1
Works on my MDA over bluetooth with the Solarius V5-MR Mini-Solar BT GPS Receiver. I just set it for generic or other or whatever (not a specific model). Works every time.
works fine on my mini s