Hi everyone
I have just bought my MDA Vario all is great, but I have noticed that the T-Mobile Customization software slows the device a great deal, has anyone attempted getting rid off it and how? The T-Mobile software is really annoying please help guys !!!
Cheers
Arthur
upgrade your t-mobile
Try to upgrade it to this version T-Mobile 2.26 and it is fast , really fast !!
http://forum.xda-developers.com/viewtopic.php?t=59513
Molski made two version netherland (NL) and English (WWE) version so if u want english then upgrade it to that and after 10 minutes u will see the effects that i say !!
Which english version do I go for the normal or G4 what is the difference?
Sorry to be a dumb arse guys but I'm fresh as they come to this...
Many thanks in advance
Arthur
arthurd said:
Which ebglish version do I go for the normal or G4 what is the difference?
Click to expand...
Click to collapse
this is for G3 and G4 is i think in US and if your phone is G3 then this is the right ROM for u. ROMS of G4 doesnot fully support G3 so there u should split IPL/SPL and then upgrade. but if u have G3 then mloski have done the spliting so that u can upgrade it.
G3 or G4 ???
I'm in UK mate so I presume it's the G3.
Many thanks
Arthur
G3
Hi I have just tried to flash the rom using the g3 version and it moaned to me with the following:
ERROR [300] : IVALID UPDATE TOOL
This update utility cannot be used for your PDA Phone. Please get a newer update utility.
Has anyone come accross this problem?
Cheers
Arthur
error
did u go to bootllot mode and then updated? or your phone was on ! u should be in bootlood mode to do it!!
OH is your phone unlocked or not? because it must be unlocked first then u can run this !!
Locked phone
Ok now we are getting to the serious bits, not sure it's brand spanking new as far as I know mate!
How do I unlock it....??
Thanks for your patience!
Arthur
if this is too much u can hard reset follow this :
1. press the comm manger button + voice button + reset butto the same time and then after 3 seconds release reset button and wait u will have black screen with this text : press send to restore factory default,other keys to quit
2.now press send key (green phone key)
3. it komes to install mode.
4. when installation is finished it comes to screen where it says wait for 3 seconds sttings will be installed immediatly reset the phone this will not allow it to install the extended rom of t-mobile ::
5. the t-mobile internet settings u can find them here in this site
Re: Locked phone
arthurd said:
Ok now we are getting to the serious bits, not sure it's brand spanking new as far as I know mate!
How do I unlock it....??
Thanks for your patience!
Arthur
Click to expand...
Click to collapse
here is the link with all the info;
http://forum.xda-developers.com/viewtopic.php?t=50768
download lokiwiz 03a.zip there and then it will do the work just follow the topic and the software that unlocks the phone.
I reccomend SIM and CID unlocking before upgrade, because it is much harder (or impossible) later... just my $.02. If you need details (they may be in the above linked thread...) ask here or if you need them faster, PM me.
Related
Hi!
I flashed my Jamin with this ROm:
RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1
Now it is totally stick in bootlaoder. I tried to falsh it with other jamin roms but i get "This NBF file cannot be used for your PDA phone. please get new NBF file."
What should i do. how can i get it back to life. Please help.
Thanks
Is your Prophet a G3 or a G4?
How can i tell
Hi!
How can i tell it was G3 or G4? can you please guide me. i also downloded tht noVendor ID rom. it falshes it upto 80% then it gives same NBF error. please help me.
Thanks
i guess it is G3
Hi!
I guess it is G3
thanks
You can tell if it's G3 or G4 by reading the wiki here: http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how. Basically if your IPL/SPLversion ends with .0000 then it's a G3. If it ends with .0001 it's a G4.
If you flashed a G3 device with a G4 ROM, well ... I'm afraid it's bad news because you could have bricked your phone.
please please
please please tell me that is not it. there must be some solution. i cant just let it go. i cant get it replaced so it has cost me a lot. is there any any way please
thornofcarrion said:
please please tell me that is not it. there must be some solution. i cant just let it go. i cant get it replaced so it has cost me a lot. is there any any way please
Click to expand...
Click to collapse
What is your IPL/SPL version to start with? You need to confirm whether you have flashed the wrong ROM or not.
mY IPL and SPL are..
Hi KTA!
You are a great help. My
IPL 1.00
SPL 2.20.0001
Please tell me its not over yet. I am really in trouble. thanks a lot lot. i mean it
thornofcarrion said:
Hi KTA!
You are a great help. My
IPL 1.00
SPL 2.20.0001
Please tell me its not over yet. I am really in trouble. thanks a lot lot. i mean it
Click to expand...
Click to collapse
OK then, your device seems to have an IPL from a G3 and an SPL from a G4. This is probably because you flashed a G4 ROM on a G3. Did the ROM Update of Jester's ROM finish succesfully? If it did, can you try holding all the three buttons (Camera, Power, Comm Manager) while hitting the soft reset?
If the device comes back with a prompt to "Press the Send button ... " just hit the green telephone button and you're set to go. If it doesn't give you this prompt come back here and tell us what it's doing.
As someone told you in another thread I would suggest installing the latest ROM from imate, i.e. this one ftp://xda:[email protected]/JAMin_WWE_213923_2139123_022021_ship.zip. Alternatively you can download it from www.clubimate.com (you need to register first).
When i Try to Reset it
Hi KTA!
i did what you said. when i press send it says format failed. what next thanks already and need more help.
Thanks
I haven't heard anything about unlocking the P3300 lately...
So guys, this is a reminder!
Let's join forces to unlock this friggin machine!
I'm trying things myself, but it looks like I'm the only one...
(I could be wrong)
But after I've seen the P3600 unlock soft download link in the "Trinity" side
of the forum I went kinda crazy...
Dudez.. Let's ROCK and UNLOCK!!!! (plz)
any luck so far ? will a hard reset plus soft reset (to delete the T-Mobile soft) work ? Hope to hear from you.
thom
2 delete t-mo $hit just soft rst when popup "..customizing your dev will start in 3sec" or how is it
Dudez... U can't just delete the simlock...
It's not possible by Hard-Resetting or Soft-Resetting...
U need to have a lot of experience with cracking/hacking to get the simlock off, but nowadays hackers/crackers became lazy...
I'm trying my best to study, but it takes a lot of time and I don't think I'm going to be able to research this within a few months. I'm not good enough.
But I'm doing my best...
How about you experts? Does the coffee taste good!?
Someone knows http://www.jafwm.com/ ? Does it work on the MDA III Compact?
Ciao
I can't access to their forum:
"The server is too busy at the moment. Please try again later."
re:jafwm
Madmaster said:
Someone knows http://www.jafwm.com/ ? Does it work on the MDA III Compact?
Ciao
Click to expand...
Click to collapse
re:jafwm
NOT YET! Cheers
Their software is no good for us.
wm6 please HTC
Madmaster said:
Someone knows http://www.jafwm.com/ ? Does it work on the MDA III Compact?
Ciao
Click to expand...
Click to collapse
I have JAFWM already... It does NOT support the unlocking of MDA Compact III
New XDA orbit
I have just recieved a new orbit as an upgrade handset from O2 about a week ago
since then I have put in it a vodaphone and a Tmobile sim in it and they both worked although it still had the o2 software on it
but I could make calls send text and recieve text to the phone
gidimille said:
I have just recieved a new orbit as an upgrade handset from O2 about a week ago
since then I have put in it a vodaphone and a Tmobile sim in it and they both worked although it still had the o2 software on it
but I could make calls send text and recieve text to the phone
Click to expand...
Click to collapse
then u received a simlock-free pda
I dont know about policy in other countries, but I got here in scocotland (UK), sim unlocked O2Orbit as well, but be aware - Sim Unlocked orbit not always mean SuperCID - u have to pay 2 imeicheck to flash notO2 rom(2 make dev supercid)
phsnake said:
I dont know about policy in other countries, but I got here in scocotland (UK), sim unlocked O2Orbit as well, but be aware - Sim Unlocked orbit not always mean SuperCID - u have to pay 2 imeicheck to flash notO2 rom(2 make dev supercid)
Click to expand...
Click to collapse
Very well noticed.. Thank you!
Wheres POF et al !
I wonder if Pof has joined forces with imeicheck.co.uk to stiffle his bid to provide the free version of the Atemis Unlocker for the masses....
Well, if anyone sees him, tell him not to let us all down...
Maybe Wm6 will inspire someone, demand for the device will surely increase.
Will it make the unlock procedure slightly different?
Trust Pof he will something out for us,i have also posted in the Trinity and Hermes forum requesting Pof,Des and Olipro for the SSPL tool for the Artemis,im sure they are working on it,lets hope something fast comes out of it.
uniqueboy said:
Maybe Wm6 will inspire someone, demand for the device will surely increase.
Will it make the unlock procedure slightly different?
Click to expand...
Click to collapse
dont think (or I dare to say) that unlock procedure doesnt depend on OS version. Maybe on radio and bootloader - unlock Universal U have to use some special radio, SSPL is some part of bootloader if i remember.
need help please on htc device supercid
Hi i do the operation to unlock sim and cid a lot of times with herm_unlock_V3a and i can't restore my imei using jafwm restore (i bought the jafwm dongle), it always says me the same error "could not save data to sd card, your phone must be unlocked, your sd card must be empty". Thanks a lot for your help!
I've got an Hermes Herm200,
PLATEFORME : POCKETPC
windows mobile version 5.0
ROM VERSION : 1.18.256.2
RADIO VERSION : 1.16.00.00
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
arvind09 said:
Trust Pof he will something out for us,i have also posted in the Trinity and Hermes forum requesting Pof,Des and Olipro for the SSPL tool for the Artemis,im sure they are working on it,lets hope something fast comes out of it.
Click to expand...
Click to collapse
It's been a year now...
It would be realy usefull to be able to unlock my sim and give my phone to my son, any news on an unlocker. If not where/who is the best place to do it?
i have the c800 with rom 1.7 , i would like to upgrade to newer version at 1.8 but at 2 % was stoping with note : INVALID VENDOR ID
Can somebody help me to this problem, i would like to upgrade to wm 6 and need the radio version more than 2.71 instead the original asia at 2.69
This lowest version make the signal always keep searching on gsm..with wm 6 os , really sad for this problems..hoping somebody can help this problem
Invalid Vedor ID means that your device is CID-locked, so you can only flash official ROM's to your phone. You can however unlock your phone at imei-check.co.uk.. BUT a person has already bricked his device with this, because it did not work properly! At this tim of speaking there is no alternative for CID-unlocking.
CID unlock...
...i have an Herald to. The OS was in finish(i think)...the only way i found to write an WWE OS...wrote to IM CHECK.CO.UK...in same day send me the application for my IMEI to unlock. I made the unlock under Vista Home Premium...now i have a brand new WWE OS in my HERALD.
Try it...it realy work.
CID unlock...
http://www.imei-check.co.uk/
But the CID unlock for what is? It's for a phone which is blocked to a company?
benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
Why are you posting like you have the solution and instead you are looking for help?
If you do so, only people with same problem like you will read your post!!!!
Christian
schumy said:
But the CID unlock for what is? It's for a phone which is blocked to a company?
Click to expand...
Click to collapse
For the lock that is set by the company indeed
benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
The title of your thread is a little bit too optimistic don't you think? If you have the solution, kudos! But if not, please watch your title.. I almost jumped a hole in the ozon layer, but too bad...
need help ( german to english)
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...
kunalg7 said:
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...
Click to expand...
Click to collapse
While the phone is on, press the soft reset button with the stylus while holding the camera button. You should then see a tri-colored screen(this is the bootloader mode, to exit simply soft reset again). What version does it say next to IPL? If it is 4.0 or higher, you need to flash HardSPL, found here. Don't do it anyway if your IPL is lower than that, it will turn your phone into an expensive doorstop. If you do have the right IPL, then proceed to flash the HardSPL, then choose your ROM and install it. However keep in mind, you won't be able to install any official ROMs while HardSPL'd. But official ROMs suck anyway.
hi im sorry if i ask a questian who already asked i guess.
Iv been searching for an answer but did not find any.
I´v tryed to update my rom on my qtek 9100 so i could get WM6 in to my device, but it´s always stops at 99% when im installing. so now when i turn the device om i just have the screen whit 3 diffrent coulors on, so pleace any one can you help me get WM6 in my device or else i have to jump on it and throw it in to the trash. Sorry for my poor english im an swedish idiot...
Best reegarde Andreas...
I presume that your phone is still SIM/CID locked.In order to get your phone upgraded to wm6,its required to have it CID unlocked first.
Which is your device, G3 or G4 ? Post IPL/SPL...?of the phone here,to determine the G3 or G4 version of the phone,cuz for CID unlocking,both have different methods.
Cheers!
Cant start it now... Im realy angry at that little thing now...
its all black in the display. Do you have any good thing to do about that?
got it started for just a 5sec then its blck again... done that about 3 times last houer but it want start...
When it gets like this is there no more to do other then throw it in the trach?
or is there hope , can i do like a hard reset or something?
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Andyswe said:
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Click to expand...
Click to collapse
Yes !
Its a G3,download the official stock rom of your carrier from its website,get the phone into bootloaders (multicolor screen),connect via usb cable,watch small usb appear at the bottom of the bootloader screen and run the RUU,let it complete and your phone will boot up to default status and then download WST tool and run the 'CID Action' button to verify the CID lock.unlock status.
But always get the battery charged before flashing.
Cheers!
Has installed the TNT rom now latest.
Hov do i get the HTC look whit a digital watch??
I assume you mean the HTC Touch clock. It's really a lot more than a digital clock.
Try this: http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html
which rom shall i use if i want a clean WM6 and install the htc Home plugin.?
hy,
i own the new ameo 16gb. the athena unlocker will not work.
System: Athe400 , IPL-v2.02 , SPL-v3.08.0000, WM6.1
is it possible, to cid-unlock this athena? i dont need a sim-unlocker. the athenaUnlocker will not work
hi xacxs,
good question Do you let me know, if you find a solution? I want change my ROM to original HTC ROM in german if possible and changeable ;-)
ohhhhhhhh... this is no good
if we can not unlock it, then we wont be able to cook custom ROMs
do we even need to unlock it at all?
I got mine directly from HTC unlocked
AllGamer said:
ohhhhhhhh... this is no good
if we can not unlock it, then we wont be able to cook custom ROMs
do we even need to unlock it at all?
I got mine directly from HTC unlocked
Click to expand...
Click to collapse
Unless HTC releases its new rom for X7510, we need to use a cooked versions. Then we need to have it CID unlocked, as I assume. OliNex group has best knowledge about this. Lets ask them.
customizing is fine
I don´t like my german T-Mobile Style. ;-)
Crazy, why it is different to the old x750x Devices?
Couldn't help but notice how no senior members responded to this thread!
Seriously, I have a T-Mobile Ameo 16 GB and would dearly love to unlock the damn thing and flash a better ROM to it, except of course I can't!
Please guys, what can I do to speed the process of making an Athe400 unlocker?
Is this any good - has anybody had any success using their services?
http://www.unlock-htc.com/UK/index.php?
Unfortunately, according to the website Ameo 16GB/HTC x7510 etc. isn't supported, since this isn't an official HTC offer but some Chinese or wherever they come from company - just like the one in Ebay, if not the same who offer their unlock-service for "older" products on the market.
So in short, still no (official) ROM update for the "new" X7510 at this point..maybe in five minutes.
no worries
it's in plans, will be done sometime
cmonex said:
it's in plans, will be done sometime
Click to expand...
Click to collapse
Hi CMONEX,
I got HTC Advantage X7510 (T-Mobile AMEO 16GB) which is SIM locked, after
boot up it shows "you have tried 15 times, please wait until
timeout", I tried with the ROM upgrade still no luck as it's showing
the "No Service". The phone is booting properly and all the other things
work except call facility.
Device name : HTC_X7510
Windows Mobile 6.1 Professionl
CE OS 5.2.19209 (Build 19209.1.0.2)
ROM version : 3.27.405.3
Radio version: 1.58.00.00
Protocol version : 32.91.7020.20W
ExtROM version : 3.27.405.104
Model No. : ATHE400
I've have successfully done x7510_HSPL365. Boot loader now shows:
ATHE400
IPL-v2.02
ATHE400
SPL-v3.65.Olinex
I also tried with WM6.5.3-23153_128DPI_x7510_6.2_VICO ROM but it also gives
"No Service" and now reverted it back to
RUU_Athena_HTC_WWE_3.27.405.3_1.58.00.00_Ship.
Could you please advise and help me to unlock it, your help and advise will
highly be appreciated and surely will make the donation for your good work.
Thanks in advance.
Best Regards,
Anshuman
NanoRuler said:
Couldn't help but notice how no senior members responded to this thread!
Seriously, I have a T-Mobile Ameo 16 GB and would dearly love to unlock the damn thing and flash a better ROM to it, except of course I can't!
Please guys, what can I do to speed the process of making an Athe400 unlocker?
Click to expand...
Click to collapse
I am on the same boat, seems there is no senior member and developer who can help to unlock ameo 16GB !
Anybody has any idea please.......