Related
Hi all,
Cannot register a serialport (Bt)
Have manage to put TomTom5 working with BT Gps.
thanks to "andreuroig"
with this work around:
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
The problem is the BT-com port is not visibel in any software neither in Tomtom the Com0 is not visible after the above instruction.
Is there a way to do the BT-com port visible?
Regards
JoseF
Complete step by step guide can be found here :
http://forum.xda-developers.com/viewtopic.php?t=28386
Thanks I have done that , still have a problem TomTom works but if I want to use another program it don´t connect :roll:
JoseF
Hi, try to do that as listed above BUT replace COM 0 with COM4. This seems to have worked for me, TT5 now works automatically, and I can use Memory Map on COM 4.
More testing tomorrow but it seems to be OK.
Kev
Josef, gpsgate is a piece of software that allows you to share a serial port between many different programs at the same time. Try downloading the working demo and see if it helps.
http://franson.com/gpsgate/
Hi kevwright,cruisin-thru,
kevwright can you reset your device and after connect to Com4 with memory map? Tomtom will work I know.
Please let us know your testing.
cruisin-thru , I have tried GPS-gate and send one e-mail. Haven´t get a replay yet. gpsgate worked well in xdaII
Regards
JoseF
Ah, after reset it does not work, sorry.
This thing also loses the Outgoing Port regardless of reset (just overnight for example) so am at a loss on this one.
Alternately, can we get Memory Map to "see" COM0 as that fix seemed to work for TomTom OK?
Kev
Hi All,
With some tricks I managed to install TomTom 5 navigator but I'm having trouble connecting it to the GPS bluetooth mouse from Rikaline 6033.
I paired the device and assigned serial port com6 to it but I cannot see port com6 within TomTom.
TomTom bluetooth support is installed.
Any suggestions?
Tried this freeware?
http://www.bluetooth.jazztel.es/
Good luck!
"Pocket Bluetooth Tools adds the missing Bluetooth functions to the O2 XDA II (or other compatible PDAs like the MDA II).
The current version includes:
Support for Bluetooth Headsets and Car kits (Headset and Handsfree Profil). You may use up to 9 devices at the same time and you do not need to bond the again.
Support for the SSP profile (serial port), e.g. for GPS receivers or modems
Support for ActiveSync (synchronization with Outlook and Internet connection)
Switch Bluetooth on and off automatically
The current version 1.60 of the ROM includes already a virtual serial port but unfortunately it is a dynamic port, which is not visible to many applications. Also the ActiveSync support is difficult and complicated to use and if you want to synchronize with different computers you have always to couple the device again.
For future releases I plan the following improvements:
Support for Bluetooth network access points
Send contacts and files through Bluetooth"
Thanks for your suggestion but two things make me hasitating...
I have a qtek S200 and the software is clearly designed for XDAII and similars.
I do have sertial port profile (assigned port 6 to the GPS mouse)
The only thing is that I do not see the serial port com6 in the TomTom application.
riiiiighhhtt,
ive had this problem with tomtom 5.0 and my bluetooth GPS device, but dont be dismayed, there is a solution! I hope that this can be applied to you and your bluetooth mouse, ...
ok, as far as i can tell there is a problem with tomtom 5.0 and the avaliable com ports. In your bluetooth com manager you can choose any avalible port, but tomtom 5.0 will only give you a few of those to choose from. Ok, to make this work, you just need a hexeditor on you pc, there are even some for the pocketpc so you can do it all on your device.
so, what you need to do is, go into tomtom, select a port for your bluetooth device (even if its not the same one you chose in the bluetooth manager) then quit out of tomtom and then sync your device, and explore it in windows
ok in:
/my device/program files/navigator
there is a file called:
naviagtor.cfg
what you need to do
is open that file up in a hexeditor, and once open it should look something like:
...................a.*....."................[email protected]domain.com$x8ysvy.n: COM7:...............
Where COM7 is the selected bluetooth port you chose in tomtom
All you need to do is change it to:
...................a.*....."................[email protected]domain.com$x8ysvy.n: COM0:...............
Where COM0 is the com port you chose in the bluetooth manager, for your specific bluetooth device
save, and now copy the navigator.cfg file back to you device, from whence it came, and then restart tomtom
it might take a little longer than you might expect, but it should now pick up your device, ... however, if you want it to continue to work, DO NOT GO IN TO THE TOMTOM BLUETOOTH PORT A SELECTOR AND CHANGE ANYTHING, as this will reset the navigator.cfg file and then you have to go through the whole process again!!
If you have a few devices you want to connect to tomtom, i would suggest setting them all up on 'dummy' tomtom ports, then setting up the REAL ports in the bluetooth manager, then changing the navigator.cfg file in a hexeditor. Once you have a decent .cfg file, save it to your memory card, JUST IN CASE, you mess up your tomtom bluetooth and need to work while you're out and about
hope that helps
lucasbuck
what version of tomtom are you using, i had the same problem on my wizard with version 5. when i updated to 5,21 from the tomtom site it added the extra com ports in tom tom and everything worked fine.
Ady B)
This is what I did today on my XDA Mini S. It's collected from this and other forums.
First I had to install the GPS icon on the PDA in settings/connections using a freeware registry editor.
STEP 1: ACTIVATE THE GPS CONTROL PANEL
1. Start up a registry editor
2. Go to: HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings 3. Delet the Dword in there and the value and replace them with:
A new DWORD called "Group" and give it the value of "2" (dec) 4. And create a new string called "(default)" with no value (I think there was originally a string called redirect, rename this "(default)" if it's there 5. The GPS panel will now show up in your connection settings. (check it does)
note: you may have to soft reset after each stage if it appears not to work straight away but i managed to make these changes then saved them soft reset and then went to control panel in settings and a GPS option was there. You'll need this for the next stage. Wait about 1 minute before doing the soft reset.
STEP 2: Set up the GPS & Tomtom
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In the GPS control panel, select the GPS program to 6 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 6 free. Select COM 6 and close TT5.
5. At the GPS control panel again, now select COM (none) 6. At BT: select OUTGOING port to 6.
7. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
If you follow the above exactly it should hopefully work.
Dave
davidkw said:
This is what I did today on my XDA Mini S. It's collected from this and other forums.
First I had to install the GPS icon on the PDA in settings/connections using a freeware registry editor.
STEP 1: ACTIVATE THE GPS CONTROL PANEL
1. Start up a registry editor
2. Go to: HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings 3. Delet the Dword in there and the value and replace them with:
A new DWORD called "Group" and give it the value of "2" (dec) 4. And create a new string called "(default)" with no value (I think there was originally a string called redirect, rename this "(default)" if it's there 5. The GPS panel will now show up in your connection settings. (check it does)
note: you may have to soft reset after each stage if it appears not to work straight away but i managed to make these changes then saved them soft reset and then went to control panel in settings and a GPS option was there. You'll need this for the next stage. Wait about 1 minute before doing the soft reset.
STEP 2: Set up the GPS & Tomtom
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In the GPS control panel, select the GPS program to 6 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 6 free. Select COM 6 and close TT5.
5. At the GPS control panel again, now select COM (none) 6. At BT: select OUTGOING port to 6.
7. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
If you follow the above exactly it should hopefully work.
Dave
Click to expand...
Click to collapse
Ok Dave, I did exactly what you did, and thanx a lot, it's working quite well !
But something annoying is happening: I have to do the BT part EVERY TIME I launch TT5 (It actually asks for it, password, COM port etc...) !!
As if my pairing wasn't saved...
Any advice ?
Thx
JD
How does the Prophet perform with TomTom and MediaPlayer running at the same time?
Sluggish?
On the Prophet, you learn one thing very quickly:
Never launch 2 programs at the same time ! :lol:
tomtom
hi which hexeditor did you use and where did you download it from. unable to get one with the script line like you typed. help much appreciated.
cheers
hi there,
sorry to trouble you again. would it be possible for you to give a more descriptive explanation regarding the editing with the hexeditor.
cheers
This is how I did it:
1) Pair the two devices, non secure connection
2) Settings/Connections/Bluetooth/COM Ports - Select a new outgoing port
3) Select your GPS and assign COM Port
4) Start TomTom Settings - select "Another GPS"
5) Select the same COM Port as above
Wonderful combination, selling my Explorist 500
hi there,
i am having the same problem as niobium. anyone solved this problem! please let me know. help much appereciated.
cheers
niobium said:
Hi All,
With some tricks I managed to install TomTom 5 navigator but I'm having trouble connecting it to the GPS bluetooth mouse from Rikaline 6033.
I paired the device and assigned serial port com6 to it but I cannot see port com6 within TomTom.
TomTom bluetooth support is installed.
Any suggestions?
Click to expand...
Click to collapse
TOM TOM 5.21 GPS PAIRING
But something annoying is happening: I have to do the BT part EVERY TIME I launch TT5 (It actually asks for it, password, COM port etc...) !!
As if my pairing wasn't saved...
Any advice ?
JUST TRY WITHOUT THE SECURE CHECKBOX MARKED !!!!!!
Thx
JD[/quote]
Re: TOM TOM 5.21 GPS PAIRING
educa said:
JUST TRY WITHOUT THE SECURE CHECKBOX MARKED !!!!!!
Click to expand...
Click to collapse
Yes that was it
Thx
JD
Thank you!!!!
(secure checkmark) worked like a charm!!!
I was ready to toss my device out the window.
Now hopfully when I get in the car, my Handsfree and GPS won't kill each other!
Thanks again
Alternative Bluetooth GPS Receiver Setup for Tom Tom Navigator 6
davidkw said:
This is what I did today on my XDA Mini S. It's collected from this and other forums.
First I had to install the GPS icon on the PDA in settings/connections using a freeware registry editor.
STEP 1: ACTIVATE THE GPS CONTROL PANEL
1. Start up a registry editor
2. Go to: HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings
3. Delet the Dword in there and the value and replace them with:
A new DWORD called "Group" and give it the value of "2" (dec)
4. And create a new string called "(default)" with no value (I think there was originally a string called redirect, rename this "(default)" if it's there
5. The GPS panel will now show up in your connection settings. (check it does)
note: you may have to soft reset after each stage if it appears not to work straight away but i managed to make these changes then saved them soft reset and then went to control panel in settings and a GPS option was there. You'll need this for the next stage. Wait about 1 minute before doing the soft reset.
Dave
Click to expand...
Click to collapse
I came unstuck at this point and had to fiddle around until I finally managed to get my BT GPS device to talk to my phone and TTN6. The following steps worked for me.
1. Pair your BT GPS with your handset BEFORE installing TTN6 (or 5 for that matter).
2. On the handset go to Settings > Connections > GPS, set the GPS Program port to COM8 and the GPS Hardware port to whatever COM your GPS device uses (mine uses COM5). The Baud rate should be set according to your GPS device's manual (mine is 4800).
3. Install TTN6 on your device and follow the setup. When asked, select whichever BT GPS receiver you're going to use and use COM8 as your communication port (if it hasn't appeared, go back to step 2 and try using COM9 instead of COM8).
4. Exit TTN6.
5. Go to Settings > Connections > GPS again, but this time set the GPS Hardware port to "(None)" and the GPS Program port whatever COM your GPS device uses (again, mine uses COM5).
6. Restart TTN6. The program should now pick up your BT GPS device.
If you're still having problems, I'm afraid I can't help much further. This worked for me, but I have a UK Orange SPV M600. It may not work for everyone.
Happy hunting,
Josh
niobium said:
Thanks for your suggestion but two things make me hasitating...
I have a qtek S200 and the software is clearly designed for XDAII and similars.
I do have sertial port profile (assigned port 6 to the GPS mouse)
The only thing is that I do not see the serial port com6 in the TomTom application.
Click to expand...
Click to collapse
Maybe I'm late or wrong, but you CAN NOT have the same serial port asigned to two devices!, depending on your version of TOM TOM you may be out of the serial port supported range....
BT serial ports are the same as the "old" PC ones.... one cable at a time....
Hope it helps.
Help before I kill my phone............
My head is going to explode at this rate.
Can anyone help me, at basic level, how to:
1. Get a reg editor, by name not just 'get a reg editor' as I have tried 2 now to no avail.
2. Is the GPS settings already in the registry to edit on my 02 mini S or do I need to get that from somewhere before I start?
Currently I can get the bluetooth to pair, can create another OUTGOING port and thats it. It wont actually give me any device even though phone is paired to it
Why cant it just be SIMPLE!!!!
BTW, Im running TTN6 and an 02 Mini S.
Cheers for now, Taff
I got tomtom (but version 6) working flawlessly with my S200. I assigned COM6 as the outgoing port for the GPS, then assigned COM7 as an incoming port. I enabled a secure connection. Then i disabled bluetooth and started tomtom (tomtom enables and disables BT automatically).
I added the GPS device as "other GPS device", waited a few seconds and there it was working.
Maybe the problem is your tomtom version being too old?
My GPS receiver is a BT-338.
I am trying to set up tomtom 5.21 with my BTGPS74 receiver but cant get the two to communicate. I know there is some settings you can change in settings/system/gps but the problem I have is I dont have the gps option in settings anywhere. Am I missing something? Does any on know what I should do. Tomtom wants me to use port 3 or 7 but when I try to set them in bluetooth settings it says its not possible check your settings. Any suggestions would b welcome. Thanks.
P.S I know the receiver works as it still works well with my N70.
...you should've gotten a GPS icon if software GPS recognized.
In rgister you can force simulation.
hklm\controlpanel\gps]
delete redirect and add 'group' with dword=2
Then GPS icon will appear.
I gave it programport 7,hardware 6, baudrate=57600
gps auto checked
I'm not sure about the settings...
I had to create incomming and outgoing com ports on my 3100 (not sure if you need both)??
TomTom used com port 9 and works like a dream
as soon as you start the programme it connects automatically as long as my receiver is on.
It even connects when the BT on the 3100 is turned off - it starts the BT automaticlally when tomtom runs!
Yeah i agree all you need to do is set up the com ports, then fire up tomtom and select the com port you just set up and away it goes
Chris
Thanks for the replies guys. I know I have to set the com ports but the problem I have is there is nowhere for me to do this. For some reason the gps settings is missing from the system/settings. I am going to try to reinstall tomtom to see if it helps. Tomtom has ports 3 and 7 showing but they seem to be taken by something else so I cant configure my receiver on either of them.
I have a slightly different problem... my TyTn can connect to the BT GPS reciever, but as soon as TomTom tries to calculate a route, or I click the GPS signal icon it crashes back to the Today screen...
I've got TomTom installed with 5.21 update, anyone had any problems like this?
you just need to pair your bluetooth device go to settings connections and bluetooth and add new device, let your tytn search and it will find a new device when you have paired it select new comm port outgoing
I have no gps setting in control panel either
Cheers
Chris
Hi,
i have a strange problem with my BT. I cant create a incoming or outgoing BT port. I dont know why but it wont let me create any ports.
Anyone with the same odd problem?
I had a similar problem, Tytn would only let me choose COM0 (Zero) as outgoing port, and TT works fine with it. However, I would like to add Mapking for Asia, and this navi soft will not accept a GPS on COM0. Anybody understands why Tytn is only offering COM0 as outgoing ports for GPS?
I have set the com4 as outgoing port and now tomtom seems to work fine.
thanks for that info.
I don't know why only port 0 and all other ports are blocked but TT works for me now. I only need to wait for a better ROM and i can leave my Wizard home
I have written to a good contact at HTC since I need COM ports other than 0 for Asian Mapking navi soft (in add. to TT) . Will keep you posted.
Answer from HTC:
"As my testing, the Outgoing port is not limited with COM0. PaPaGo can accept with COM0, COM2, COM4, COM8, and COM9. I think the limitation of COM0 is the software limitation of TOMTOM, So if the user wants to use Mapking that only support COM1~7, he need delete the outgoing port COM0, and reassign another COM port for the BT GPS."
I imagine the problem lies between the Tytn and TomTom only, and other navi soft would find other COM ports. But I am kind of hesitant to interfere with a working TomTom, and go through the outgoing COM port game again...
I'm using Navigon and set up an outgoing Connection on com2 and it works fine for me.
sounds like TT is the problem ...
greetz
sphings
Guys, let me try to help you a little bit, as I work in navigation software development (Destinator).
1. The COM ports has nothing to do with the actual software you are running. This is pre-defined in the ROM you are using. That is also the reason why we see variations here - we use different ROMs.
2. In order of enabling a COM port, you do NOT need to discover the GPS icon on the settings. It is quite useless unless you wish to work simultaniusly with more than one software.
3. To enable a COM port, after you pair the GPS, look down for the tab COM Ports in the BT settings Manager. You only need to create Outgoing COM.
4. Strange but usually you will only be able to choose between 2 COM ports. The rest are hidden by the OS. MAKE SURE that you disabled the "Secure Connections". Default key for all the GPS receivers is "0000" and for Globalsat 308 is "2003". The last is AKA HP GPS.
5. If you cannot enable any other COM port than COM0, this is a ROM problem and you should contact your ROM provider like the mobile carrier. You can also try to enable other COM ports with the attached CAB file. Simply run it, it will expose all COM ports for you and now you should start trying. I reccomend to test COMs 4-8 first, normally, it will solve your problems. (Note: I got this file previously here and did not create it myself).
There have been may posts about TomTom not recognising B GPS's.
One solution that doesnlt seem to be mentioned here id to ensure that the name of the GPs in BT connections actually ends in "GPS"..
If it doesn;t renove the pairing and re-pari , but change the name this time to something that ends in "GPS"...
good luck
Charlie Grillo
Thanks guys, found another solution that works for me now:
1) Set your Bluetooth GPS to another COM port than 0 (TomTom´s standard port 6 was not available, so I choose 2)
2) open Programs/Navigator/navigator.cfg with a text editor, change COM0 to COM2
3) start TomTom - working on COM 2!
Started Mapking, found COM 2 - working now.
hello fellas,
as you can see im new here. im thinking of buying the TYTN, a sector which i have never explored before (pda sector).
it sounds great with the applications and due to my work, a need for a pda is becoming bigger.
i posted in this message due to the GPS topic.
i got a very stupid question which you may recieve occasionally if i buy the tytn.. :twisted:
why do a person need BT enabled GPS? i read you can connect it to your PDA but for what reason?
thanks in advance and apologies for any inconvience..
@D_G - welcome to this board
In order to run navigation software on your Tytn you need a external GPS connected to it. Easiest solution is a external GPS connected via Bluetooth.
Another solution would be to buy a PDA phone with a GPS receiver on board, for example the ETen G500.
Of course we would all be interested in a UMTS PDA with integrated GPS, with acceptable battery life, but that will take some time...
thanks lucas for the answer. but why would you need a navigation software if you have a GPS device? in either case you will need to have both devices in a particula blue tooth range. right?
this means you will need your handheld device + the GPS to activate the navigation software, or dd I miss something?!
i have problems connecting bluetooth GPS receiver with tomtom, any one know how to solve this? My TyTN wont allow me to chose the COM ports that are listed on tomtom's configuration page under the bluetooth settings for Outgoing port.
Tomtom only allows COM3, COM7, RIL on COM6 but all these COMs could not be created on my Bluetooth settings with TyTN. TyTN says "COM port could not be created. Please check your settings again"
I have TomTom Navigator 6.020 (7980) with GPS driver 1.20. Is this version having problems? The funniest thing is that the Route66 Navigator 7 that came with my TyTN works perfectly without any COM settings and problems...I just wanted to opt-in for TomTom because of its features. I am driving all the way to Norway next week and I would like that TomTom would work so I could know about Speedcameras and POIs which I do not have on Route66
I have the new August Europe WWE WM6 Rom: 3.54.255.3 & Radio: 1.48.00.10 from HTC Europe site installed on my TyTn.
Someone please help...comments are hightly appreciated!
BT Com Problem TomTom Hermes
Hello,
When your TyTN can't assign your COM Port then the Com Port is in use allready. Sometimes it hepls, when you restart your Hermes. I don't know how to check your COM port settings.
If you can understand German you can look at http://forum.pocketnavigation.de/index.php there your Problem is discussed already.
Greetings Pudl
don't know if you add the bluetooth GPS to your bluetooth equpitment list yet or not. if not do that in the setting (the phone setting).after they connected, go to "com setting" add out going port for the GPS. then open tomtom and setup the gps again. should see the port.
i think i have a solution
I think i might have the solution to your problem.
It took me almost 2 weeks to find this hack-ish for myself, but that was because i had a holux m1000 bt reciever (aparrently not many people use it).
First let me explain my problem so if someone else is going thru this same problem they can identify the solution.
- The problem was that after pairing with the bt holux reciever, the outgoing com port that i had assigned it would not work under the "bluetooth reciever" preference in the tomtom software.
the reason is that holux apparently works on nmea profile and in the nmea preference, the given outgoing port doesnt show up.
Now the step-by-step answer to this problem(and hopefully yours)
1- Go the blutooth devices and delete the device from your system.
2- Restart the bt reciever and wait till you have a satellite signal
3- Pair with the reciever and input the appropriate code.(you dont need to check the serial checkbox)
4- Now go to the COMPorts tab in bluetooth settings.
5- Assign a new outgoing port to the bt reciever.(COM9 works for me)
6- Start tomtom navigator.
7- Go to "change prefrences"
8- Find "show Gps status"
9- click configure
10- Find "other NMEA GPS reciever" - select it
11- Leave the baud rate to whatever it says. -click done
12- Now you will not see your outgoing port that you assigned in step 5 but choose any other "COM PORT" (i always do COM7)
EXIT OUT OF TOMTOM NAVIGATOR PROGRAM
OK, we are almost there.
13- Now find the file Program Files>> Navigator>> "navigator.cfg" or Storage Card>> Program Files>> Navigator>> "navigator.cfg"
14
-if you have a hex editor installed on your ppc use it to edit this "navigator.cfg file and skip to step 15.
-Other wise what i did was rename the navigator.cfg to navigator.cfg.txt and opened it using "word mobile"
15- Now you will see a lot of wierd symbols but look for the com port you assigned in the NMEA settings in tomtom. (step12) (on mine i had assigned COM7)
16- Change that "COM7" (from step12) to "COM9" (from step 5)
17- exit out of WORD and choose "NO" at the Prompt to "not" save it in word format (if you have accidentally saved it in word you have to go back to step 6 for tomtom to create a new navigator.cfg file)
18- last thing to do is to rename the "navigator.cfg.txt" file back to "navigator.cfg"
that is it. now when you start tomtom you will automatically be connected to the correct NMEA COM port (just dont try to configure the gps again or step 13 is for you.)
I had tried External GPS settings in the connections i had tried Gpsgate software (which worked but i didnt like the extra memory hog)
to me this was the only way to get it to work and once you have it configured you dont have to worry about a thing.
sorry about the length of the explaination but i had trouble figuring this out for myself so i tried to make this explanation as detailed as possible.
I have done this:
settings - connections - bluetooth
After pairing the GPS go to the "COM port" tab, click on "new exit port" (or similar, my system is in italian!)
select the GPS
select either COM 2 or 3.
go back within TT, select "other BT devices" and you will find the COM you have just created.
credits: stesa @ pocketpcitalia.com, thnks again.
"thepella's" method is about the same as the one I used.
Just a couple of general points to note:
1.
If you have previously set up a bluetooth pairing and it does not work, do not try editing it to different settings (ports etc). I have found, as have others, that even if you put in the correct settings it may still not work. It is better to DELETE the old pairing and create a new one. Whatever Outgoing port you choose (often it chooses COM(0) for you), that port will then appear as an option in the Tomtom menu.
2.
The Tomtom screen that shows the satellites is very useful. It has a line that comes up saying either "no GPS device" or "no valid GPS signal" when you first switch on. No valid signal is ok, normally just give it a minute or two to find a lock. No valid device means, either the BT receiver is out of range or you do not have the correct COM port selected. If all is OK you will see the line change to "Other Bluetooth GPS receiver". These little messages are vital when setting up because the satellite bars on the screen can take some minutes to appear (with mine sometimes it's instant, other times 5 minutes despite it having found the BT device)
3.
Which ports you choose depends on what else is set up on your device. On mine COM(0) or COM(9) seem to work consistently well for Tomtom.
4.
When you are done using Tomtom, switch off the BT receiver first before exiting Tomtom. This ensures that the Bluetooth radio switches off when you exit - otherwise it stays on using power.
5.
It appears that you can use the red phone button to close Tomtom. However I have found that if you use that button instead of the exit menu in Tomtom, then it leaves Tomtom as a running process in memory. This may be handy if you want Tomtom to start more quickly next time, but not if you want a clean system without extras running in the background.
Mike
TomTom Nav 6 COM port
I just did this myself today. Its as described by a couple of the above posts.
Go to Comm Manager>settings>Bluetooth
Open "COM ports" tab and select "New Ougoing Port"
If your device is paired it will show in the list. Select it, press next, then choose the port. Then finish. I used 0.
Now TomTom will have that COM port available to select.
Hi,
I install GPS utilities and try to connect to GPS holux. When search, it can found GPS holux. But when I try to start. It always failed. It can't connect to GPS device.
Does anyone have a good experience about this?
I'm using Amadeus with WM 2003 SE and Holux M1000.
What GPS software do you use on your mobile device?
I have a Qtek 8010 with a Holux M1000, but I could not find any functioning GPS program...
connected to GPS!
I was able to connect to my GPS, now it's up and going .
Configuration:
Qtek 8010
WM 6.1 [1.5] http://forum.xda-developers.com/showthread.php?t=374893
Holux M1000
GPS software: PocketGPS-Map http://pocketgpsmap.sourceforge.net/
I have Efficasoft GPS Utilities installed on my smartphone. But I can't found GPS when I run this application
Should I upgrade my smartphone to WM 6?
I downloaded and tried Efficasoft GPS Utilities. Nice program, have you the key?
It functioned without problems on my typhoon device; where did you get problems/errors and what messages did you get?
I hope I can help you...
I don't have the key yet, I just want to try my GPS connection for test.
I choose Auto Search Bluetooth GPS Receiver. My holux was found. But when I try to connect (Start GPS), it always failed.
Error message:
Unable to connect GPS receiver. Please check the receiver connection setup and try Start GPS again.
What's wrong with my GPS
You could try to assign a COM port to your Holux, instead of using Auto Search Bluetooth.
1. turn the Holux on;
2. Assign a com port from Settings > Connections > Bluetooth
(here you should see your Holux, if you don't click on Add new device)
select Holux, click on Menu > COM Ports and assign a COM port (I have assigned COM6 for example)
3. Now start GPS Utilities
4. Click on Menu > GPS Setup
5. De-select Auto Search Bluetooth and select the correct COM port (COM6 for me)
6. Click on Menu > Done
7. Click on Menu > Start GPS
Does it work?
I think my smartphone menu is different.
start > settings >
I can't see Connections. It has Data Connection (for GPRS setting) and Bluetooth.
I try to select Bluetooth, select holux, but I can't found menu to assign COM port.
FYI, I'm using WM2003, not WM6.
My problem is I can't make/choose COM port for bluetooth.
I don't know how to help you.
I see two options:
1) try another gps software
2) try to upgrade your rom
I've upgraded from WM2003 to WM6.1 and I'm very satisfied -- thank you ALEUT!
upgrade guide here: http://karhoe.net/content/view/35/1/
It's ok. Thank you for your help