Cingular 8125 and Blackberry Connect - 8125, K-JAM, P4300, MDA Vario General

There is allot of stuff floating around so I am hoping to consolidate it as much as possible.
If you are using an 8125 and have BB Connect working please resond with information on ROM versions and the steps you have taken to get BB Connect working.
If you have been unsuccessful with your 8125 and BB Connect Please respond likewise.
Thanks

bboyle said:
There is allot of stuff floating around so I am hoping to consolidate it as much as possible.
If you are using an 8125 and have BB Connect working please resond with information on ROM versions and the steps you have taken to get BB Connect working.
If you have been unsuccessful with your 8125 and BB Connect Please respond likewise.
Thanks
Click to expand...
Click to collapse
While there has been a lot of stuff, most of the real info has been in a single thread - I recommend taking the time to read it rather than having this thread turn into a duplicate - see http://forum.xda-developers.com/viewtopic.php?t=32087&highlight=blackberry+8125
(found easily by doing a search of 8125 and blackberry in the Wizard grouping...)
Moral of the story - you'll find that there is a good combination of blackberry connect software and an 8125 ROM (although many people have found lackluster performance) - and, in any event, I haven't seen anything yet that says that people have been succesful with this combination on Cingular.
Enjoy.

Related

Everything looks like it should be right, but it isn't -GPRS

Hi all,
I've spent the last 3 weeks searching through everything so as not to waste anyones time with a simple question but to no avail.
I've been given an XDA II from a family member as they have upgraded to the Exec and I have been using it as a PDA only. Well I see that Orange have some good deals on the go and so decide to use it as a phone/Internet enabled PDA.
I've unlocked it (many times now) got 2003SE on it and have put the correct MMS and GPRS settings in (The ones from Shadamehr). I've checked with Orange and GPRS is enabled on my account with them (PAYG at the mo) but for some reason the same thing that was happening when I first got it pops up
"Cannot connect
There is no modem at the above number..."
So best my small mind can figure is that somehow the 'phone part' of the PDA isn't working. I've tried other sims in it and they don't work either (o2 and Three - but I think Three is funny anyways). Is there something wrong with the actual phone bit?
It's a legit XDA with the M1000 ROM upgrade from the orange site which has made it 2003SE
Does anyone have any knowledge about how I can get my PDA to be a phone? It was once before (but with O2)
Thanks in advance for any and all help.
-o0zy
http://www.taniwha.org.uk/gprs.html
No modem at above number
Thanks for the link, but believe me I've tried this. I retried it to be sure just now.
"No modem at above number" is what I get after the XDA II tries to connect.
I have no phone reception whatsoever, no internet and no SMS.
My XDA II just works as a PDA with no communication possiblities apart from USB cradle.
Again, thanks in advance for any and all help with this.
-o0zy
If there's no phone reception, and no GPRS, how do you expect to connect to one?
Not to be mean or anything, but aren't your hopes of connecting a little farfetched if all the systems you're trying to use are down?
Not to be mean or anything, but aren't your hopes of connecting a little farfetched if all the systems you're trying to use are down?
Click to expand...
Click to collapse
Your not being mean, believe me after a month of searching through here and SPV developers anything that wuld resolve this issue would be appreciated.
Why would the phone element of my XDA just stop working? I can only imagine some sort of Hardware fault but I'm a thorough bunny and would like to make sure of this. A diagnostic app or some way of reading the phone element like a device driver would be handy.
So in brief, why has my phone part of my XDA II stopped working and how do I switch it back on again (if this is at all possible)?
Thank you for your replies thusfar Cynagen, I shall start to ask these questions in the Himalaya forum also now since it seems model specific and not network related.
Any and all further assistance is much appreciated.
o00zy

Brand New Unopened MDA (T-Mobile USA)

I'm getting a new t-mobile mda usa phone this week and was wondering what are the first steps expert gurus like yourselves would do?
I've never used MDA before, but I'm a quick learner and have upgraded firmware and whatnot for other things in the past.
So, what would be the first step?
Test it out, see if it works...bla bla bla
Then? Would I upgrade the firmware? Which firmware should I use?
If I upgrade to a firmware that voids the warranty, could I flash the firmware back to stock T-mobile firmware and they would never know the difference (not that i would do that, just wondering)?
What programs/tweaks would you install?
If i get the 5.99 or whatever T-Zones, could I view any website and send/receive email through gmail...or would there be additional charges? Could I also use AIM, or would that cost extra?
I bought 5 MDA's for $250 total from amazon. However, it required me to select the data internet plan which is like $30/mo for each phone. But i was told I could cancel it within 14 days for all the phones, and instead get t-zones for $5.99?
Also...could you guys recommend some good accessories w/links or prices?
Screenprotectors, BT headsets...etc?
I'm also looking for a good, but cheap MiniSD 2gb card.
http://www.outpost.com/product/4922971 <-- Would this work for me, or is there a better one I should look at?
Sorry for asking so many questions, it's just that my MDA is coming this week and I'm really excited and want to be prepared for it.
Thanks guys!
THAT KINGSTON mini sd is the roxs!! works really well!
thou it might not read on ur card reader thru teh mini sd adapter, but hey for that price you can't go wrong!!
there are a ton of progs out there.. i would carefully breeze thru the wiki and other sticky's and then mod/add prog
if you have 1.80 ver firm.. unlock sim and CID then upgrade to 2.26!!
then programs and stuff is your liking.
enjoy.. sorry im in a rush, but you'll get plenty of help!
well .. MDA's cool but if you could wait a couple of weeks or maybe just get it's current version which is the MDA II (Vario II) which should be coming out soon here in the US ... In Europe, it's been out for at least a month or so... The MDA II (Vario II), aka XDA Trion, HTC TyTN, Orange SPVM3100, and the soon to be released Cingular 8525 is available online... just my two cents worth .... the new version has a lot more power and newer / current features which would work on HSPDA/UMTS ....
FYI
I got my MDA in July or August, I believe. I got it from T-Mobile, not one of their distributers, because I could control the family plan better, that we already had, and could request the area code I wanted (Also got a Samsung t-809 slide--a really cool phone).
Coming from an HP IPAQ 6315, I am VERY pleased with the MDA. However, I did not synch it with my Jensen B/T headphones because the driver wasn't compatible with WM5. More importantly, no matter what I tried I couldn't hook it up to my Garmin GPS 10--a B/T GPS unit that works AMAZINGLY well at finding your location--Both the headset and the Garmin work with the HP.
So I followed T-Mobile's directions to upgrade the MDA firmware to the ROM version 2.26.10.105 and I am SO glad I did!
The new version has its own A2DP driver, so the Jensens immediately synched beautifully.
The Garmin was trickier. I had to buy a registry editor--I went for Kilmist which works very nicely. You need to hack the registry to reveal the GPS Icon in the System tray.
The tree is:
Pocket PC\HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings.
You delete ALL the keys under GPS Settings, especially the REDIRECT key.
I've read that you can switch the HIDE key from 1 to 0, but I couldn't get that to work--when I cleared the REDIRECT it worked.
Reboot, and the GPS Icon should appear. This allows you to tailor the device's COM port to match the GPS software from Garmin.
I'm not really crazy about the Windows Media Player--it's a pain to use, a pain to set up, and I have NO idea what MS was thinking. Instead, I use something called BetaPlayer both for movies and music. It's simple, clear, obvious, and you don't have to go through stupid gyrations to get either music or movies to it (it plays AVIs). When we travel, I'll rip movies using Pocket PC DVD (an nice, inexpensive pgm) to AVIs in the 15-225 meg range, and dump them to the Mini-SD card. BetaPlayer allows me to play them without any problem and rotates to landscape mode with a tap.
BetaPlayer is a free download, that Pocket PC DVD sets you up with. I THINK they have replaced it with an upgrade.
I can use it with AIM, but the return key on the keyboard doesn't "send"--so far I've had to tap the Send icon with the stylus--Is there a way around this?
eMail works very nicely--I route to my own account, not T-Mobile's, so I can get and send my mail. But it ALWAYS truncates the mail, forces you to click on it and re-download. Again, anybody have a way to fix this?
Compared to the HP IPAQ 6315, there's really no comparison. The HP has a bigger screen, but it's a bigger, bulkier unit and I don't notice a difference. It does just about everything better than the HP, and I don't have to soft-boot it every single day!
BIG plus on the MDA/Wizard--the antenna doesn't stick out so you can't break it off (I actually broke off the cover of the antenna on the HP in an airport--Had to replace the entire antenna assembly to replace the cover!)
I really like the SanDisk cards. I have 4 2-gig cards I bought on-line for about $40-$50 apiece (I forgot which). I THINK it was at Buy.com--not sure. I've never had a SanDisk card or flash drive fail or fail to connect. Yeah, 2g mini-SDs work just fine on this PDA.
The MDA is more like a thick cell phone than a PDA in size and feel. I hope to explore a lot more of its capabilities.
Hi, thanks for all the replies guys.
I've been trying to do as much research as possible before getting the phone.
Bigshoguns said:
unlock sim and CID then upgrade to 2.26
Click to expand...
Click to collapse
Could you explain how to unlock SIM/CID? I tried following a sticky, but it seems some of these forum links are dead or different b/c of the new forum software. I think i have to use lokiwiz or something, but I cant seem to find it? If anyone can point that out plus give me instructions, I'd appreciate it.
Also, I'm a bit nervous about OC'ing the device. Do you do it in increments? How do you know when you've OC'd it too much, does it start to freeze or will it just not turn on or something?
Yanktar03 said:
I can use it with AIM, but the return key on the keyboard doesn't "send"--so far I've had to tap the Send icon with the stylus--Is there a way around this?
Click to expand...
Click to collapse
I've been doing some reading and I think I found an answer for you.
http://forum.xda-developers.com/showthread.php?p=985458&highlight=return#post985458
Not sure if you can do it with the regular AIM, but with the hacked AIM you could go to options/preferences and under IM/Chat/Mobile make sure "Enter Key Inserts Return" is unchecked.
Sorry if this is incorrect, I dont have an MDA and have never used one but I'm just going by some stuff I read.
Oh yeah, does anyone know when MDA II (USA) is coming out..I would feel a bit of buyers remorse if it's coming out soon and will be offered at an attractive price for new contracts. Oh well....MDA is still good, right?
Anymore help/suggestions would be greatful!
Thanks!
chroniX said:
Hi, thanks for all the replies guys.
I've been trying to do as much research as possible before getting the phone.
Could you explain how to unlock SIM/CID? I tried following a sticky, but it seems some of these forum links are dead or different b/c of the new forum software. I think i have to use lokiwiz or something, but I cant seem to find it? If anyone can point that out plus give me instructions, I'd appreciate it.
Also, I'm a bit nervous about OC'ing the device. Do you do it in increments? How do you know when you've OC'd it too much, does it start to freeze or will it just not turn on or something?
I've been doing some reading and I think I found an answer for you.
http://forum.xda-developers.com/showthread.php?p=985458&highlight=return#post985458
Not sure if you can do it with the regular AIM, but with the hacked AIM you could go to options/preferences and under IM/Chat/Mobile make sure "Enter Key Inserts Return" is unchecked.
Sorry if this is incorrect, I dont have an MDA and have never used one but I'm just going by some stuff I read.
Oh yeah, does anyone know when MDA II (USA) is coming out..I would feel a bit of buyers remorse if it's coming out soon and will be offered at an attractive price for new contracts. Oh well....MDA is still good, right?
Anymore help/suggestions would be greatful!
Thanks!
Click to expand...
Click to collapse
T-Mobile makes you wait 90 days before they will give you the unlock code and procedure for free. But if you already are a customer you may be able to bully them into it sooner. I did because I added my MDA and T-809 phone to our family plan.
I don't know about the CID, but if you get the T-Mobile unlock that's all you need. The upgrade of the ROM, via the T-Mobile procedure and software is very easy and does NOT void the warranty.
Thanks about the AIM--I found another thread here yesterday where there is a modified version of AIM 2.0 that is FAR better than T-Mobile's and gives you the "return" key back, and allows you to force the sign-on. Apparently you don't have to pay for messaging with it--it's via Internet!
Little by little the MDA is becoming the PDA I always wanted.
chroniX said:
Hi, thanks for all the replies guys.
Could you explain how to unlock SIM/CID? I tried following a sticky, but it seems some of these forum links are dead or different b/c of the new forum software. I think i have to use lokiwiz or something, but I cant seem to find it? If anyone can point that out plus give me instructions, I'd appreciate it.
Also, I'm a bit nervous about OC'ing the device. Do you do it in increments? How do you know when you've OC'd it too much, does it start to freeze or will it just not turn on or something?
Thanks!
Click to expand...
Click to collapse
for unlocking use Lokiwiz02b.zip which is found in the Xda ftp:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
dont worry about overclocking - im running mine @ 224 with the 2.26 rom
i was overclocking @ 240 with the custom 2.24 - really helps out performance
for overclocking someone recommended Batterystatus which is a small neat program, using very little resources to manage the battery and overclock and its free
http://www.chi-tai.info/cs_BatteryStatus_XDA_Neo_WM5_iM_cs.htm
Whatever you do don't buy ShieldZone Screen Protector.
ZzFDKzZ said:
Whatever you do don't buy ShieldZone Screen Protector.
Click to expand...
Click to collapse
Is that the same as Invisible Shield? I thought those were supposed to be good.
What would you recommend then?
If you plan to upgrade to the Official Tmobile 2.26 rom you do not need to unlock. It will handle all of that for you. Just make sure your battery power is over the suggest amount (I think its 50%) I have seen some nightmare stories here from people who didn't.

Getting Blackberry connect to work on 8525

im trying to get blackberry connect to work on a cingular 8525 which currently has the stock 1.34.502.1. I installed blackberry connect (which i found on this forum), however, it keeps saying service:stopped and PIN: Pending. I have seen these errors in a few searches on this forum, so im thinking its the rom? ive found the rom RUU_HER_CINGULAR_2.06.502.3_1.34.00.10_SPL1.04, will that work with blackberry connect? Or could it be a problem with the plan? The plan on this device has the $30 blackberry service. The phone before the 8525 being used on this account was a blackberry which worked perfect with push email.
ps, ide like to appologize, i know there is lots of information on this topic and normally i would search and find all my own answers, however, i am home from school and my friend got an 8525 and desperatly needs to get blackberry connect working, however, i have to go home tonight. thats why im posting for a quick answer, since there is so much to search through and read.
Thanks in advance

newbie help needed please

hi guys im playing around with a tmobile(uk) mda vario 1 i bought today 2nd hand and am trying to set it up to acess the internet via wifi.ive just plugged in a wireless router(free from virgin) and is working fine with my daughters laptop and sony psp. but i dont know how to set up this phone ie what do i type in and where? also i dont know what the ip addy is where i am.
can anyone please help a newbie please.
Turn on the Wi-Fit, then it should automatically scan. After that, click your router, and enter your security key.
By the way, 3 tips for the future:
1) Don't call a thread "newbie help needed" or any sort of thing like that, it usually gets ignored, or flamed. A better title for this problem would be "how do I connect my Vario to my Wireless Network?"
2) search for the answer, has been asnwered many many times before, and I know that without searching myself.
3) post it in the relevant forum. Although "Networking" may seem relevant to you, there is a forum called Wizard general, which is for questions like this about the T-Mobile Vario.
And, just so you know, your device has the codename "Wizard" so the Wizard forums is where you should be READING right now.
Rory
hi thanks for the quick reply and i will take them points onboard next time i start a thread.
ive turned the router & modem on then turned my wifi on which then does pick up it.ive entered the sec key and stuff and all is fine but if i click on internet exp non of the web pages i type in load up?

Blackberry Connect

Hello,
First, let me apologise if this has been asked and answered but I went through loads of pages without the answer so I thought I'd ask.
Right, I did have a TYTN II with bbconnect working and full usage of the BB service. Since going to the X1, I can't seem to make it work no mater what I do, including the registry hack I used on the TYTNII.
I get 'Network available' > 'data tunnel enabled' > disconnect and PIN always stays at 'Pending'.
Has anyone figured out how to make this work yet? If not, I think I'll have to sell the X1 and go back to my tyttnii.
thanks in advance!
/frustrated\
Yes, I have been waiting for the BBConnect for my X1 also but it is not available yet at this moment.
I will wait for the BBConnect to be available instead of selling the phone because of this software.
Hi all - 1st time here and posting.
Anyone know if there has been any success on this front?
Looking at getting an X1, but it would be a waste if I couldn't make use of BB Connect.
Anyway, will be watching with keen interest.
Cheers

Categories

Resources