This problem has to do with the Parrot CK3100. I noticed that sometimes when dialing a number from the Parrot, the TyTN doesn’t wake up. The radio is muted, I hear some beeps but nothing happens and the radio gets playing again until I manualy switch on the TyTN and then the dialing of the numbers starts. After a sec. the radio is muted and I can have the conversation.
Happens with 1 out of 4 calls made from the Parrot. I'm not using JetWare.
pinballwizard said:
This problem has to do with the Parrot CK3100. I noticed that sometimes when dialing a number from the Parrot, the TyTN doesn’t wake up. The radio is muted, I hear some beeps but nothing happens and the radio gets playing again until I manualy switch on the TyTN and then the dialing of the numbers starts. After a sec. the radio is muted and I can have the conversation.
Happens with 1 out of 4 calls made from the Parrot. I'm not using JetWare.
Click to expand...
Click to collapse
Same here.
But i think the problem is Wisbar oder iLauncher...
I don't use wisbar nor ilauncher! Only program at startup is spb pocket plus.
Related
Friends,
I have the EXEC and when im using TOMTOM i receive a call, does anyone know how to answer it and Enable the handsfree speaker? I found that i was driving, and i got the call alert and pressed Answer, however i had to pick the exec up, and use it as a normal hand-ear. Anyway of enabling Hands Free?
MANY THANKS
Try holding the Green Button until the speaker is activated + - 3 Seconds
Then switch of Aircon / radio / close the window ...
I must say that Radio 1.06.00 improved the Speaker volume
Regards
Skillie
or buy a bluetooth headset (circa £30 these days) and configure the auto answer feature.
Even without auto answer on my MDA Pro interupts TomTom with the usual call anouncement and I simply hit the button on my headset to accept the call.
i'm having the same problem..
when i use tomtom with bt gps.. and my bt headset.. i cannot make or answer any calls..
the ringtone doesn't sound normal either.. (no continues ringing)
multiple bluetooth devices problem?
TomTom & Nokia Car Kit
I have a similar problem,
I am using a Nokia CK-7w BT Car kit, and a generic BT GPS receiver.
Upon receiving a call, the phone rings as normal, swtiches the stereo off and I take the call - however once on the call I lose the connection to the GPS receiver.
IT must be possible for the two devices to work together as I always receive the calls through the Car Kit.
Any ideas?
TomTom & Nokia Car Kit
I have a similar problem,
I am using a Nokia CK-7w BT Car kit, and a generic BT GPS receiver.
Upon receiving a call, the phone rings as normal, swtiches the stereo off and I take the call - however once on the call I lose the connection to the GPS receiver.
IT must be possible for the two devices to work together as I always receive the calls through the Car Kit.
Any ideas?
Dunno, my O2 Exec with Tomtom 5.2 has no problems. I use a globalsat receiver and currently a Moto HS820 headset, (previously a Jabra BT200, but I broke that).
Navigates fine, when I recieve a call, tomtom is muted, the exec and the headset ring, I press the answer button on the headset, and can take the call, Tomtom will continue to navigate without voice prompts. Finish the call via headset button again and Tomtom becomes un-muted and continues as before.
So the Exec version of the universal at least is more than capable of managing the tasks you require via multiple bluetooth connections. I run in corporate mode if that makes any difference.
tomtom 5?
Im using tomtom 5.21 (i think) with a Bluetooth handsfree kit. Jabra over the ear type. When a call comes in and TomTom is runnin a message flashes up on screen notifying of incoming call. I can answer the call using the soft answer button on screen or by pressing the pickup button on my headset. When I do the message on screen goes away and TomTom carries on just with the sound muted. When I hang up by pressing the call button on my headset TomTom unmutes itself.
Certainly with a bluetooth handsfree kit I have found tomtom works really well.
When I press the button on the BT headset to answer incoming call the ringing stops on the caller end and on the cingular 8125 (rom 2.25), but there's a 2-3 second delay before the phone actually connects the call to the BT headset.
On the caller side they have 2-3 seconds of dead airtime, after the ring stops. Because of the connection delay, the caller is already saying hello - hello - hello (etc) thinking the call has been answered.
I've tried 3 different bluetooth headsets (Moto 850, Plantronics 645 & 655, Jabra JX10) and they all experience the same problem.
I've verified it's not associated with the 3 second ring delay issue (posted on XDA) - phone rings almost immediately.
Any thoughts, recommendations, hacks/tweaks will greatly be appreciated. This is becoming more of a problem, as I use my phone mostly for business.
Otherwise the phone has been outstanding.
BT headset delay
I have the same issue with T-mobile MDA and Jabra BT250V. Not only does the delay confuse callers, but they hear the ring tone and buzzing of the vibrator before they hear me... hello...hello...hello. It really sucks.
I have tried a Motorola headset (H350) the delay is shorter but the headset sound quality sucks. I was going to try the Jabra JX10 next and hope for the best.
I've also tried using the "BT on" feature of PocketZenPhone to avoid the delay. Not a satisfactory solution.
Does anyone have a solution for this? Is anyone answering calls on their BT headset and getting a quick connection? Is this just me?????
dratliff said:
When I press the button on the BT headset to answer incoming call the ringing stops on the caller end and on the cingular 8125 (rom 2.25), but there's a 2-3 second delay before the phone actually connects the call to the BT headset.
On the caller side they have 2-3 seconds of dead airtime, after the ring stops. Because of the connection delay, the caller is already saying hello - hello - hello (etc) thinking the call has been answered.
I've tried 3 different bluetooth headsets (Moto 850, Plantronics 645 & 655, Jabra JX10) and they all experience the same problem.
I've verified it's not associated with the 3 second ring delay issue (posted on XDA) - phone rings almost immediately.
Any thoughts, recommendations, hacks/tweaks will greatly be appreciated. This is becoming more of a problem, as I use my phone mostly for business.
Otherwise the phone has been outstanding.
Click to expand...
Click to collapse
i have the moto HT820 stereo bluetooth headset and experience nothing like that, even when running my bluetooth gps reciever... the call is answered as soon as i hit the button... only problem i have is the lagging and skipping music, but i dont listen to music so its not a problem
My H700 delays on both of my Qteks (Wizard and Prophet). It only delays if I close the boom. If I leave the headset with the boom open it picks up right away when I press the side button. With the boom closed when it rings, I find that if I open the boom I have to wait 2-3 seconds for the sound to transfer. If I open the boom and press the button, 2-3 seconds it will hang up on the caller because I guess opening the boom is picking it up already
However, my HT820 stereo headset doesn't have any of those problems. Quick and easy, picks up right away; however there's no boom. My Bluespoon AX5 doesn't delay either.
pdxadmin said:
I have the same issue with T-mobile MDA and Jabra BT250V. Not only does the delay confuse callers, but they hear the ring tone and buzzing of the vibrator before they hear me... hello...hello...hello. It really sucks.
I have tried a Motorola headset (H350) the delay is shorter but the headset sound quality sucks. I was going to try the Jabra JX10 next and hope for the best.
I've also tried using the "BT on" feature of PocketZenPhone to avoid the delay. Not a satisfactory solution.
Does anyone have a solution for this? Is anyone answering calls on their BT headset and getting a quick connection? Is this just me?????
Click to expand...
Click to collapse
I had a bt250, and that delay is a known problem with the bt250,possibly making the problem worse
Is there any possible way to repair the BT annoying thing?
I've got a Parrto BT set in my car and the tytn disconnects all the time, when I achieve the connections I cannot transfer my contacts...
Thanks for your help
Hi,
Which model of Parrot car kit is it? I use the CK3100 (the one with the LCD) and it works except for the usual TyTN switching BT off when it disconnects from the Parrot after stopping the car. Sync works fine.
Might also be worth looking in the Parrot forums at http://www.driveblue.com/
Gav.
Parrot
I also have the 3100!!
When I get into the car it doesn't recognize me. I need to go to congiguration and establish the link, the it seems that it starts to sinchronize the agenda but it doesn't!!!
Hi again.
Is there any chance you have the power cables to the Parrot CK3100 the wrong way round? If that is the case then the Parrot CK3100 will forget the pairing to your phone and you will need to re-pair everytime. The easiest way to fix this is to reverse the wires at the fuse.
Basically there are 2 wires on the Parrot Parrot CK3100, one perminent to the battery for saving the memory and the other is the ignition. When the ignition goes to 12v then the Parrot CK3100 powers on and tries to connect to the phones in its pairing memory list (upto 5).
Do you know which firmware is on your Parrot CK3100? The latest is 4.15b > it's under the Advance menu.
Gav.
Don't think so
I don't think so because it worked perfectly well with my Blackberry!
Got my TyTN yesterday (had a Wizard) and so far it works just fine with my CK3100. Syncs nice and fast and connects within 10 seconds. I did install Jetware mobile extender to make the display a little better. Haven't experienced the TyTN turning BT off yet...
Hi Pablete,
Strange. I can only suggest re-pairing and updating the Parrot to the latest firmware rev.
Hi Scott,
What advantage does Jetware mobile extender give?
Gav.
Jetware changes the "network OK" to the real network name, adds signal and battery bars, adds the phone ringtone instead of the Parrot ringtone and several other cool features.
Edit: the URL... http://www.jetwaremobile.com/
problem BT and voice dial
when i push green button on parrot, no voice dialling possible tru speakers?
Any solutions.
If i use (new) voice dial 1.6 (which reads sms) same things happen and additionally when i use dial a number i even can not confirm?
anybody a solution
thanx in advance
re960088 said:
when i push green button on parrot, no voice dialling possible tru speakers?
Any solutions.
If i use (new) voice dial 1.6 (which reads sms) same things happen and additionally when i use dial a number i even can not confirm?
anybody a solution
thanx in advance
Click to expand...
Click to collapse
Not completely sure I understand the question? If you meant to ask if it is possible to do voice dialing in the carkit instead of the phone then head to the voice commands menu, and in the bottom you'll find an option to change where voice commands are processed; carkit or phone.
i meant when i push the parrot green button the application voice dialer switches on on my TYTN, but no beep can be heared tru the car speakers?
with the newest cyberon voice dialler i can not confirm or redial, even if used outside the car?
Any suggestions
Having a question, how do you guys use your phone (incomming and outgoing calls) AND TomTom6 at the same time? I mean, when you are in TT6 and my phone rings, TT6 'minimizes/goes to background' during the phone conversation. After ending my phone call, TT6 again appears. Is it possible to still get the route suggestions with the TT6 voices while making phone calls? And is it also possible to have a separate screen in the HTC 9000 so you can see AND TT6 AND your Phone? (I make most calls handsfree in the car so this would be great!).
Also, is it possible to have the HTC 9000 connect to my Pioneer radio/cd player to get TomTom over my car speakers?
no ideas anyone?
really really no clues?
That's strange.
Mine is minimizing when the call is incoming but appears again in mute mode when I answer. I'm also using phonealarm car profile to automatically enable speaker.
But I do no think you can have voth displays.
My suggestion would be to map a hardware button to switch task.
sanderh said:
Having a question, how do you guys use your phone (incomming and outgoing calls) AND TomTom6 at the same time? I mean, when you are in TT6 and my phone rings, TT6 'minimizes/goes to background' during the phone conversation. After ending my phone call, TT6 again appears. Is it possible to still get the route suggestions with the TT6 voices while making phone calls? And is it also possible to have a separate screen in the HTC 9000 so you can see AND TT6 AND your Phone? (I make most calls handsfree in the car so this would be great!).
Also, is it possible to have the HTC 9000 connect to my Pioneer radio/cd player to get TomTom over my car speakers?
Click to expand...
Click to collapse
Firstly, I do not have a Navigator6 device but do intend to get one. Therefore, I cannot answer the following:
Having a question, how do you guys use your phone (incomming and outgoing calls) AND TomTom6 at the same time? I mean, when you are in TT6 and my phone rings, TT6 'minimizes/goes to background' during the phone conversation. After ending my phone call, TT6 again appears. Is it possible to still get the route suggestions with the TT6 voices while making phone calls?
As far as the following is concerned:
And is it also possible to have a separate screen in the HTC 9000 so you can see AND TT6 AND your Phone? (I make most calls handsfree in the car so this would be great!).
No, because no HTC device support multi-monitors and split-screens.
And finally:
Also, is it possible to have the HTC 9000 connect to my Pioneer radio/cd player to get TomTom over my car speakers?
Yes, this is possible. You can use the S/PDIF jack and hook it up to the amplifier of your car (yes, you will need an amplifier for you car's audio system to do this). ANother way is the wireless-but-low-quality-audio way which involves using a Bluetooth headset hooked up again to your car's amplifier.
akhnot said:
That's strange.
Mine is minimizing when the call is incoming but appears again in mute mode when I answer. I'm also using phonealarm car profile to automatically enable speaker.
But I do no think you can have voth displays.
My suggestion would be to map a hardware button to switch task.
Click to expand...
Click to collapse
Which version of TomTom are you running (the build number) and have you installed the TomTom BT drivers?
I use TT 6.030. Don t know what BT drivers are............
I use TT6.
After phone rings (i asume u using bluetoth hands free)other ways how d you look at the screen., i pres button on my hands free, and screen stase on TT.
When i left my BT at home, i pres unswer, and then loud speeker, and then tiny TT icon at the bottom of the screen, and it pops up. after hanging the call TT stays .
It also works with my IGo 2006.
When I use TT6 with my MDA Pro with a bluetooth headset and I answer a call the bluetooth connection to the gps temporarily drops then reinstates however after the call is hung up the gps signal to tomtom seems to delay by around 30 secs/
does anyone else experience this and do they have a remedy.
sanderh said:
Having a question, how do you guys use your phone (incomming and outgoing calls) AND TomTom6 at the same time? I mean, when you are in TT6 and my phone rings, TT6 'minimizes/goes to background' during the phone conversation. After ending my phone call, TT6 again appears. Is it possible to still get the route suggestions with the TT6 voices while making phone calls? And is it also possible to have a separate screen in the HTC 9000 so you can see AND TT6 AND your Phone? (I make most calls handsfree in the car so this would be great!).
Also, is it possible to have the HTC 9000 connect to my Pioneer radio/cd player to get TomTom over my car speakers?
Click to expand...
Click to collapse
I'm now at NBD 7.9 ROM and my TT6 isn't comming back any more.
On the WM5 ROM it did after I got connected in or out calling, but now it stays on the phonepad untill I disconnect then it switches back to TT6.
I realy want it to switch when it gets connected, may be some knows how to do it?!?! (may a registry key...)
any help or solution to this same prob???
Marvie said:
I'm now at NBD 7.9 ROM and my TT6 isn't comming back any more.
On the WM5 ROM it did after I got connected in or out calling, but now it stays on the phonepad untill I disconnect then it switches back to TT6.
I realy want it to switch when it gets connected, may be some knows how to do it?!?! (may a registry key...)
Click to expand...
Click to collapse
Still no one has a solution...
I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass
If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.
NetrunnerAT said:
If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.
Click to expand...
Click to collapse
There is a tick in the box for the headset profile and the icon comes up in the status field. It only switches if I answer with the buttons on the phone.
Noone has any ideas? Hasn't anyone else this problem?
I am not sure, but why dont you just answer the call with the headset.
PseudoReal said:
I am not sure, but why dont you just answer the call with the headset.
Click to expand...
Click to collapse
That's what I do - my biggest issue is the first question:
While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
BT headset problems
I have an xda2 i and I have the problem that even when the headet is connected, at times an incoming call won't broadcast over the headset at all, and equally if i dial out the call doesn't transfer to the headset.
Curiously, I've found the solution is to go into bluetooth manager -->active connections--> and click on STATUS of the head set connected. it should show signal strength and such. I double click on the CONNECTED message (oor maybe somewhere on the screen, basically double tap until it reads NOT CONNECTED ..... as odd as it sounds... this is what i needed... as when I do this, it usually works ok for me.
Maybe it will help?
..........IB a n e