I have a 9000 and trying to make Goodlink work on it. When I reach the "enter pin" section I canot enter 5 digits but only 3 and the windows are very small. This is because (I guess) Goodlink does not support VGA res devices yet. Is there any SW to switch my 9000 to QVGA resolution? Has anyone tried Goodlink software on any Universal device? Thx a lot in advance for any help.
You're going to hate this, but download the Pocket PC 2003 version from Get.Good.Com from any PC, not the device.
Hope this helps.
Related
Hi there,
I've done a lot of searching on these forums and it seems the be the place to ask.
It appears people have had some success using various downloadable versions of the BlackBerry connect software from international locations for various devices.
When I've tried to install this on a iPAQ 6325 I currently have on demo, it fails the installation since it can't recognize the hardware.
From what I've found, the client is coded to only install on specific hardware. Since all of these devices use Windows Pocket PC 2003, I don't see why this client can't be installed on any device using that OS.
What I'd like to know is, has anyone taken the client and removed the code that checks the hardware configuration and allows the installation, or, has anyone ported over the current MDA version to an iPAQ 63xx series yet??
PS I am also connecting to a BES in my corporate network if that changes how the program would need to be coded.
Thanks so much!
Cheers
Aaron
Hi,
Does anyone already have a solution? This is the only, but big drawback that I have with my Qtek 9000.
Thanks,
J Fonseca
JFONSECA said:
Hi,
Does anyone already have a solution? This is the only, but big drawback that I have with my Qtek 9000.
Thanks,
J Fonseca
Click to expand...
Click to collapse
I used to have kse truefax, which worked a treat - but that was on orange.... who set me up with a second exclusively fax/data line with its own number.
Bloody O2 dont do that.
i use tascal fax viewer.
it is free and works
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/index_e.htm
hollytree said:
i use tascal fax viewer.
it is free and works
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/index_e.htm
Click to expand...
Click to collapse
Does that allow you to receive faxes to your device?
It doesn't work
Hi,
I tried that software, but it's only to view fax files, it does not allow to send or receive faxes.
i'll keep looking for a working alternative.
Thanks,
JFonseca
Hi
I found this one on a Yahoo Group:
http://www.samtechnc.com/eng/introduction/mfax_intro.htm
It should work on my Qtek 9000, but i was not able to try, because i don't have enough skills for that.
Maybe someone here can try and post their experiences
Mfax is for PocketPC 2003. I asked them when they may make it available for WM5 and got the following reply;
"Right now we do not know if and when we will be able to support Windows Mobile 5.0 Pocket PC Phones with our software.
The problem is that the modem i.e. network manufacturer (Qualcomm with their CDMA network) is not supporting fax class 1 or 2 in their system. Therefore we are not able to support the WM 5.0 Pocket PC Phones (or the CDMA based WM 2003 Pocket PC Phones). Furthermore HTC is - due to the lack of support from Qualcomm - not able to support us either.
So we are stuck in the middle. As long as Qualcomm doesn't set a higher
priority to the fax class support within their network (modem) we can do
nothing about this issue.
As soon as they would change this issue we would immediately be able to
support WM 5.0 Pocket PC Phones as well as CDMA phones using their network.
Frankly, I do not think that this issue will be solved soon. Faxing is still
seen as not important by the big companies (which I certainly do not agree, but we do not have a lobby or a direct contact person at Qualcomm, who has the power to change this)."
Maybe we should start lobbying Qualcomm.
We are MFaxCE's developer
We are the developer of MFaxCE. Actually, we have already ported our MFaxCE to WM5.0 successfully, but we found that HTC have changed a lot or haven't open the port for fax on WM5.0 device, we still fail to send/receive fax on WM5.0 right now.
However we are working with some manufacturer who is willing to modify their driver to make our MFaxCE capable of fax on their WM5.0 device. And we are also looking forward that HTC can do some modification or disclose some information to us, so that we can make MFaxCE compatiable with all the HTC WM5 device.
We will keep you posted about any news in the future!
samtech said:
We are the developer of MFaxCE. Actually, we have already ported our MFaxCE to WM5.0 successfully, but we found that HTC have changed a lot or haven't open the port for fax on WM5.0 device, we still fail to send/receive fax on WM5.0 right now.
However we are working with some manufacturer who is willing to modify their driver to make our MFaxCE capable of fax on their WM5.0 device. And we are also looking forward that HTC can do some modification or disclose some information to us, so that we can make MFaxCE compatiable with all the HTC WM5 device.
We will keep you posted about any news in the future!
Click to expand...
Click to collapse
any news ?
Hi folks,
I've had problems with the shipped BB version for my Athena. I downloaded and installed the Desktop Component 2.1.1.21 and the BBC version 2.1.2.54. Both are running smoothly and fast.
Donwload from here:
Desktop Component: http://support.vodafone.de/publicfiles/activesyncinstaller2.1.1.21.zip
BB Client: http://support.vodafone.de/publicfiles/bbconnect_pocketpc_bb_2[1].1.2.54.exe
Cheers
Hello.
Thanks for the links.
A quick question: Are you able to be on the web, and still have your mail
pushed in?
Or, must you exit IE or Opera to switch over to mail?
I am so grateful to you if this all works out.
Also, do you know by chance if Cingular has an issue with BB on a Pocket PC?
I can't see why they would, as long as I have the BB data plan... yes?
thanks again.
Hi C0rnholio, I am trying to use my direct push mail functions of my Athena.
However, I am not aware that the Athena comes with a blackberry connect software. Apparently yours come with it, but you have some problems with it, am I correct?
Then you find another software which solved your problems.
Actually which one of those 2 downloads which you posted replace the original problem software? Do you install one in your PC and one in your Athena or both in Athena?
If I can use my Athena for my Blackberry connection, that will help me get rid of my blackberry device coming from my provider.
Please enlighten me on this Blackberry connect for Athena!
BB: anyone using it?
any other experiences? I'm restlessly waiting for my ordered advantage...... will the rom in the advantage be permissable to load BB connect? i went thru this with my wizard..... at the end of it all, when on the web, bb wldn't wrk,until exiting PIE and vice versa....... let's hope this has been upgraded
Blackberry on my HTC Advantage up and running.
Info: WM5 in Spanish
BB in spanish. I installed the BB from the links of Vodafone found in this forum.
My server is Lotus Notes 6.
Any other information just ask me.
BB on WM5 is the best solution for BB. I tried Symbian BB on several machines including Nokia 9300 and the result on WM5 is more stable and you can open ALL attachments. Even better than real RIM BB machines... If you need BB got BB for WM5. Trust me. Off course in this Athena with the huge screen and with the HSDPA is the best solution.
All I need to find out were is the limit of the size of the attachements you can download... if in the BB on Wm5, in the BB Desktop or in the BES itself.
Regards and thank you for the information to install BB on WM5,
mahjong
Just to anyone to know.
BB 4 on the Athena in WM5 destroy the today screen and I should made a hardreset and rollback to BB 2. Looks like a incompatibility between BB 4 and WM5 to me... I'm not sure.
More details in the BB 4 threat in this forum.
Best Regards,
mahjong
Hi there,
I need you expertise, as our company recently rolled out a PPC encryption software alled PointSEC, which will be automatically installed on our PPC, as soon as we connect them to our company laptops for sync.
The only work around to avoid this installation seams to some kind of emulator for my tytn, which identifies the device a a WM4 or older towards MS active sync, as the new PointSEC software is only compatible with WM5 or higher, and therefor does not install on WM4 or older devices.
Is there any kind of software, which makes the PPC WM5 looking like WM4 towards active sync?
Thanks for your help.
Kind regards,
ARo
Hi all,
I've installed cab files wm6voip.cab and wm6-sipconfigtool200.cab into a Siemens Loox N560 Pocket PC.
After restarting the device the following message appears:
"The file ':MSCprog' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists try reinstalling or restoring this file"
Phone symbol is shown in top bar but when I try 'Settings', nothing appear.
'Internet Calling' is show in Today settings but nothing appear in Today screen.
I've successfuly installed these two cabs in an E-TEN X500 - wm6 and is working great with voip calls.
So I think I need a phone application. Where can I find one? Does wm6 voip client work without a phone application?
Regards,
There's no cprog (phone dialer) on PDA, you need a smartphone.
MS WM6 VoIP/RTP stack may exist somewhere for PDA, but it's not the same as the smartphone version you are trying to use.
Thanks for the reply.
I googled so far but only xda appears with wm6 voip... Fujitsu-Siemens has dropped PocketPC line.
Do you know where can I find such version of wm6 voip for PDA?
Thanks in advance.