SD card driver/patch, if SD card not recognized - JAM, MDA Compact, S100 General

Hi,
A few months ago, I had to download a driver so that my magician/Qtek S100 could recognize my 1GB SanDisk SD card. Before installing this driver the device always wrote that I should format the card to make it readable. But it never worked. After installing this driver it did.
Now I worked on the device (installed a new case) and therefore it had no power for a week. I did a backup of the whole system on the SD card, but I am not able to access it anymore I also do not have this driver anymore.
Does someone know the link of this driver/patch? I think I found it in this forum.
Thanks for help!

Related

Strange problem with TyTn

Hello everybody, I'm new here and I'm having a strange problem with my Hermes.
Sometime ago I downloaded the slide2unlock cab and installed it. Then I removed it for some reason. Last week I inserted my sd in the computer and it asked me to format the card. There was no way to get into the sd and I lost all my data.
Now, after having formatted my sd, the device is continually hanging and when I put it in standby it always turns on automatically. Most of the times it also doesn't recognize the sd card and I have to reboot.
Can anyone help me, please?
Did you reformat the sd card FAT32? Its the preferred format but they seem to come formatted FAT by default.
Check to see if the sd card is still being detected by the PC, if it isn't then its time to get a new sd card.
Had you installed any apps on the sd card that might be causing problems.
Not from the sd card but I have had apps that, though I'd installed to the sd card, had installed the exe file onto my Hermes and a heap of data files onto the card.
Otherwise, might be time for a Hard reset...
Tanks for the fast answer. The sd card is formatted to FAT (not FAT32) and now is working in the computer.
Regarding programs installed in the sd, the problem could be exactly the slide2unlock, but I've removed it sometimes ago.
Only other thing to do wopuld be to do a hard reset. !st backup up your contacts to the sd card with spb backup(has a demo of 5 backup/re-installs). Needs to registered but you can at least backup contacts and messages then re-install after HR.
Hard reset should fix all your problems.
Cheers...

[Q]How to make SD card ready for WP7?

Hi,
I have Sandisk 2gb SD card which comes with hd2, i installed WP7 but it seems that WP7 can not recognize my SD because when i put SD in my computer nothing is changed in my SD even i tested it, I put some files in SD and reinstall WP7 so as far as i understand wp7 has to format my SD put its specific partition but guess what nothing is changed in my SD even that files remain in the same place...
So i tried to format SD my self with FAT32 and FAT and even i delete my SD partition and none of them make WP7 format and make partitions on my SD card...
P.S-1 My SD card is working i tested it wit my computer by formatting copy some files there so read and write is ok.
P.S-2 WP7 booted correctly in this situation i mean when SD is in device the only problem i have is WIFI can not find any router when SD is in device, when i took it out wifi start working, why i'm saying this because i aware of compatibility issue of WP7 with some SD cards where it reboots if it is not compatible .
same thing happens to me, I am now trying to reinstall (again) wp7, and it seems it got stuck at the DFT screen..... previously it booted almost inmediately. maybe it is partitioning it?, for those of you guys that sd card works, wp7 boots inmidiately?
Yeah SD cards makes crash wifi !
And i cannot use it... Flash WP7 with formated SD cards NTFS but still doesn't works !
First time i istalled WP7 without SD card and when i afterward inserted card nothing was changed. Then i made Factory Reset from Settings menu and my phone started to restart over and over from point where DFT banner shws first time after loader. Then i went to the loader and as i can remember then i re-selected preferred boot source and then for me all was good. Now it show 1.6GB free space with my original HD2 SD card.
i am having axactly the same trouble. i have a san disk 2 gb too. it'll be enough for me but wp7 does not recognize it. i installed both sd-card inserted and sd-card not inserted. i booted with sd-cad and without sd-card. i tried every posibility but no result
reserved space is %95 on zune and it tells me there is no disk space. so i cant start using it full functionally and it makes me really sad
any help is appreciated. thanks.
Pisisuli said:
...
and my phone started to restart over and over from point where DFT banner shws first time after loader.
...
Click to expand...
Click to collapse
that's exactly what mine did!
...
Then i went to the loader and as i can remember then i re-selected preferred boot source and then for me all was good.
...
Click to expand...
Click to collapse
how did you do that? can you provide a short 1,2,3 step- tut to me? thx in adv.!
Same here my 2Gb card is only showing 15 mb of available space and I cant even transfer music or install any apps. can some pls help me
thanks
I just went to
setting and then soft reset ... and I couldn't go to loader I don;t know why !!
then I lost every thing even the unlock ...
and in the finally i found just 997 mb !!!!!!!!!!!!!!!!
jessesam said:
Same here my 2Gb card is only showing 15 mb of available space and I cant even transfer music or install any apps. can some pls help me
thanks
Click to expand...
Click to collapse
I have exact the same problem.. i found some sort of "solution". but it is a bit strange. when I pull out the sd card, boot my phone in magldr, insert my sd card and boot wp7, It shows the normal storage instead of the 15 mb.
but when I try a normal reboot without going to magldr, its going back to the 15 mb. and when I try to sync my phone with zune,(with the put-sdcard-in-phone-when-in-magldr-solution) everything goes slow.
Dont know if you (or someone else) already found a "good" solution?
greetz
all of you guys have an incompatible SD card, sorry guys, will need to buy a new one, its a bit of a lottery as that too might not work and dispite what some on here say its impossible to recomend anything.
only advice i can give is get a card that class 2 or 4 and dont spend money on a card that you may end up using for a tiny paperwight
is my sd card gone?
After I successfully flash WM7, I juz realize that my pc not recognize my sd card when i connect my phone to d computer. First, i thought becoz of some bug of wm7 so i try to flash android back. I took my sd card put into a card reader but it still not recognize my sd card. Is it gone?
What about the sd unlock tool that xbmod released ? try a few nokia devices or a device which takes sd card to see if you can unlock... Check out 96edwy video on YouTube on how to unlock after wp7
I have the same problem like arrirang .
When I put my SdCard to CardReader, windows 7 does not recognize SD Card in reader. If I try proces mentioned in video tutorial -> result is the same. Device USB Mass Storage is displayed in device manager with error code.
I was trying it in three computers (two with windows 7 x64 and one with Windows XP) - the result was allways the same.
Any one help me?
EDIT:
I have found this solution:
1. Connect USB cable from PC to phone.
2. At PC, enter WP7-Update-Cab-Sender folder.
3. Go to ‘if needed install this tool’ folder.
4. Install Setup-UpdateWP (x64 for 64 bits Windows and x86 for 32 bits Windows).
5. Copy DEV_STORAGELOCK.cab to WP7-Update-Cab-Sender folder.
6. Run WP7 Update Cab Sender.bat.
7. Then type S – (S)end Cabs to device.
8. After finished installation, close WP7 Update Cab Sender.
9. Disconnect USB cable from phone.
10. At WP7, launch StorageLock.
11. Click yes to unlock SD card.
12. Shutdown your phone.
13. Put your SD card into card reader.
14. Launch Partition Wizard Home Edition (download it here)
15. You should see 2 partitions on SD card.
16. Delete both of them.
17. Create a primary FAT32 file type partition.
18. Click ‘Apply’ to begin the process.
19. That’s all.
It works! I kid you not!!
mmajor said:
I have the same problem like arrirang .
When I put my SdCard to CardReader, windows 7 does not recognize SD Card in reader. If I try proces mentioned in video tutorial -> result is the same. Device USB Mass Storage is displayed in device manager with error code.
I was trying it in three computers (two with windows 7 x64 and one with Windows XP) - the result was allways the same.
Any one help me?
Click to expand...
Click to collapse
You should know that Installing wp7 locks your card so thats why it is not recognised by your pc..
Have you installed mango or another wp7 version on this sd card or succesfully on another?? I take it, you have no nokia devices that can format your card?
If you have mango installed transfer the storageunlock.cab to the phone followed by partition cab (got to be less than your total capacity) Reset your phone check if partition has taken effect..unlock using storage lock.turn off phone ..take sd card out into adapter into your pc now it should be readable (not full capacity bear in mind) you have to use easeus partition tool to format to full..
If you have mango on a different sd card and want to recover the corrupt one
Check this link http://forum.xda-developers.com/showthread.php?t=1286511
Or if your using just the same sd card you have to start over again and reflash from task 29 stock magdlr radio ie then storage unlock tool
Good luck
hey my problem is that wp7 in my hd2 shows internal memory of 175mb only even though my 8gb sd card is inserted in it..i cant seem to find a sloution to make my phone show the sd card memory..any solution please?
I have the same problem
it's probably because you installed wp7 without the sd card in it and you did not hard reset after installing rom...if so, you need to do a hard reset with the sd card in it for wp7 to recognize the card. or you have a bad card to begin with and the wp7 install had problems.

SD Card

hello, so after recently using WP7, I've found myself unable to use my SD Card
Windows doesn't recognize it (That sd card formatting tool that's in several stickies, DISKPART, device manager, etc.) (I've also used 2 MicroSD -> SD Card adapters in an attempt to fix)
my phone doesn't recognize it (WP7 will use it) (Magldr says it clears the MBR, and I've reinstalled WP7 in an attempt to use the sd formatting tool, but no avail, and CWM fails to recognize it)
I've also installed busy box on my phone and tried to fdisk it, I plugged a 1GB microsd card I have into the phone while in android, used 'mount' got the /dev/ location of the sdcard (/dev/block/void/179:1) and swapped cards, but it won't open the stock 16GB
any ideas XDA?
Dylan Wilson said:
hello, so after recently using WP7, I've found myself unable to use my SD Card
Windows doesn't recognize it (That sd card formatting tool that's in several stickies, DISKPART, device manager, etc.) (I've also used 2 MicroSD -> SD Card adapters in an attempt to fix)
my phone doesn't recognize it (WP7 will use it) (Magldr says it clears the MBR, and I've reinstalled WP7 in an attempt to use the sd formatting tool, but no avail, and CWM fails to recognize it)
I've also installed busy box on my phone and tried to fdisk it, I plugged a 1GB microsd card I have into the phone while in android, used 'mount' got the /dev/ location of the sdcard (/dev/block/void/179:1) and swapped cards, but it won't open the stock 16GB
any ideas XDA?
Click to expand...
Click to collapse
I had this Problem one time too. My Solution was to put the 16GB Mirco-SD Card inside the SD-Adapter. After that i plug this SD-Card inside my Digital-Camera ( Powershot G7 ) and make a "Deep Format". After that, everything works fine...
Maybe this helps!
Happy Christmas,
Michael
Thanks for the tip, I've tried it on one camera but it was a rather crappy one and it just froze the camera o.o
going to try with my nicer camera when I get home
--edit--
eek. tried it on a PowerShot Aesomething and it jsut said memory card error and greyed out the format button, might be time for a new card, oh well, I could go for a higher class on android since it lags my apps a bit

[Q] Can't format my sd card!

So about a week ago I downloaded new version of icecream tosti's ICS rom (v0.6) and booted into CWM to mount my sd card and move the zip file over. I noticed that it was taking longer time to move the file than it usually does but I let the process finish. I unmounted the card and went to install the zip from sd card but couldn't find it. I tried to move the file again and again but couldn't get it to copy the file onto the sd card. I tried moving files from the sd card onto the computer but that was not possible either. It wouldn't show me errors and complete the moving process but it actually didn't move anything. I thought there was something wrong with the sd card so I tried formatting it... no success!
I have used easues partition manager, mini tool partition manager, hp sd card utility, panasoic sd card formatter, tried formatting it through windows native options, used disk management, even tried formatting it through CWM but i kept on getting the same error, can't format. I was placing the micro sd card in a usb card reader and sd card reader in order to format it through computer. I have also tried using different computers but that didn't solve the issue. The problem is that every time I try to install a rom it reverts back to an older revision of the rom with old settings that I set before. It seems to me some how the sd card is locked in a previous state and it is write protected and won't let me format it.
Does anyone have any ideas on how I can solve my problem or does this mean the sd card is gone and I have to buy a new one?
I have exactly the same problem after using NexusHD2-ICS-4.0.3-CM9 V1.3. It seems this sd card was frozen, nothing on it can be changed. If I copy a file to it on computer, it shows copy successful, but that file cannot be read, and if refresh it shows nothing have changed in the SD card.
Anyone have any idea about this?
I have three broken micro sd cards now, two from WP7 and this one from ICS.
pacman1891 said:
I have exactly the same problem after using NexusHD2-ICS-4.0.3-CM9 V1.3. It seems this sd card was frozen, nothing on it can be changed. If I copy a file to it on computer, it shows copy successful, but that file cannot be read, and if refresh it shows nothing have changed in the SD card.
Anyone have any idea about this?
I have three broken micro sd cards now, two from WP7 and this one from ICS.
Click to expand...
Click to collapse
I waited a couple of weeks for someone to answer on this forum and tried all methods possible to format the sd card or revive it somehow but no luck so just recently purchased a new sandisk class 4 sd card hopefully this one doesn't go bad either. I just wish I knew why it was happening so I don't repeat the process again and end up damaging the card.
Have you tried to format with MAGLDR and after it on windows 7 pc ?
I did that, also followed this post:
http://forum.xda-developers.com/showthread.php?t=1283232
Contents on this sd card just refuse to change.
is there a solution to this coz im having the same problem and cant find a way to fix this
you can do it by this software's :
HDD Low Level Format Tool
MiniTool Partition Wizard
EASEUS Partition Master
Partition Wizard Home Edition
.
.
.
.
but i dont know how create swap and ext4 partitions on sd .
This happen because you formatted the card on the phone. I never recommend to format on the phone the cards but on PC. Try the application I posted on computer with FAT32 in 32768 unit size.

Tablet no longer recognizes SD card after October 2022 software update

My tablet kept bugging me to install the latest update, so I let it do so. After restarting, it no longer recognizes my 200 gb SD card. My computer has no trouble reading the card (it's backing everything up from it now). The card had been functioning just fine until the update. I put in a 128 gb (previously used) sd card I had around, and it didn't read it either. I then fed it a brand new (64gb) card, and it apparently formatted it and recognized it. Has Samsung changed the required file format for SD cards? It seems to want me to reformat my card (hence my backing it up first). Any other options? Of course, the info presented before the update said nothing about causing SD card issues
I dont know man.
I backed up the card, allowed the tablet to reformat it, and recopied everything by inserting the card into the pc. After the recopying it didn't recognize it again. AARGH! So I let it reformat it again, and am now copying just the essential stuff with the card in the tablet and the tablet connected via usb. Windows is telling me this will take 9 hours just to copy one folder with 6gb and 7k (smallish) files. I hope Windows is lying about the 9 hours! There was originally a folder .android _secure. I wondering if copying that over the first time is what prevented the tablet from recognizing the card. So that's not being copied over this time. There's another ginormous folder with about 100gb of largish files. But given the app they go with will probably insist on redownloading them anyway, I may leave them off.
I found there is a statement about the Micro Sd Card in the latest user-book (for Android 13). It says, the system support the format of exFat and Fat, but when you slot the sd card of different format to your device, the system will require a reformat to use it, or your device will not identify the sd card. You can check it on the Samsung website, for the edition I read is Chinese.

Categories

Resources