Database Users

Is my qtek 9100 crashed?

Hi, i tried to install touchflo on my pda phone but the instalation failed. And now everytime i try to install a custom rom or anouther rom for example: button's 1.05 ROM. The instalation totaly completes but when my phone restarts it´s gets stuck at the boot screen with the picture on a beer and the ipl/spl 1.01 shows up and there its stuck, i dont come in to windows. i have followed these guides: http://forum.xda-developers.com/showthread.php?t=298613 and http://forum.xda-developers.com/showthread.php?t=285435
But with some roms the instalation stops at 98% and a error message cames up and it says: "error 326: this NBF file can not be used for your PDA phone, please check your NBF file"
And when i try to hard reset it says: "format FAT partition and format is failed"
pleeease help me what scould i do to get my phone back to normal again?
sincerly yours// Johan

When its on the beer bootscreen, give it time. The button rom (i find) is real slow but works for what we use it for

Is your phone CID unlocked ? try to get the phone in bootloaders mode (multicolor Screen) and either flash the button's rom 1.05 or official stock rom of your carrier to recover back to default working status and download the WST tool and verify the SIM/CID lock/unlock status of the phone.If you have inserted any sdcard or mini sd card remove it before flashing.
Cheers!

skezza said:
When its on the beer bootscreen, give it time. The button rom (i find) is real slow but works for what we use it for
Click to expand...
Click to collapse
no, i have waited for 10 hours but its still stuck

zabardast_1 said:
Is your phone CID unlocked ? try to get the phone in bootloaders mode (multicolor Screen) and either flash the button's rom 1.05 or official stock rom of your carrier to recover back to default working status and download the WST tool and verify the SIM/CID lock/unlock status of the phone.If you have inserted any sdcard or mini sd card remove it before flashing.
Cheers!
Click to expand...
Click to collapse
yes i have CID unlocked it one time. but when i get the phone in the 3 colored screen but when i flash de buttons rom 1.05 and complete the instalation i get stuck in the beer screen there i can see ipl/spl 1.01 i dont came in to windows and i must come in to windows to rerun the CID unlocking or can i do that by the 3 colored screen?
pleease help me
cheers!

Got the same Problem, any ideas?
Hi Ashtrays,
could you solve your problem?
I got the same one: Flashed my MDA with a new ROM, and after a complete installation it gets stuck at the splash screen.
I flashed back to Buttons 1.05 ROM but still got the same problem: A nice beer glas and the info about IPL/SPL 1.01 and nothing more happens.
So have you solved your problem? Maybe you can help me out...
thanks
Henning

Do a Soft reset or Hard Reset,it shud work,otherwise reflash the Rom.

Don't know what CID Lock is on phone - how to figure out

Hi all,
I have a iMate SP3 here that I'm trying to get working for a coworker. Long story short they did this once before and I re-flashed it with some ROM (no clue which one) to get it working. Well, they broke it again and it's at the bootloader screen.
Problem is, I have no clue what CID lock is on the phone. The SPL is 1.01.0107 and I can't really find any mention of it. The phone doesn't boot any further than the bootloader screen and needs to be flashed, but I'm not sure with what. So far it's rejected all the ROMs I've tried.
Info 2 in MTTY gives me the output below:
HTCSCDL___01 4š«@HTCE
Can anyone tell me what I can flash this phone with to get something booting on it again? Thanks

please visit ftp://ftp.clubimate.com
choose the appropriate rom for you

USPL - is there a way to check that process successfully finished?

Hello,
I have spv m650 branded with orange. Have successfully removed simlock, but cid-lock removing with "Wizard Service Tool" failed.
So I was trying to bypass CID lock with USPL.
However I thing something went wrong.
I started start_uspl.exe and followed steps with documentation.
Phone rebooted with blank (black) screen. (ok so far)
According to info at wizard active sync should be connected (green) while flashing. However my phone didn't show it's connected while boot mode.
I've waited about 10mins and decided to continue. After next steps wizard show info that now will start flashing and it take about 10mins. But it took only about 5 seconds... After that wizard showed that finished. And my phone started with normal mode.
So I'm totally unsure if this succeded or not, and since I don't want to brick my phone I'm a bit scared about flashing my system - because I'm not sure if CID is bypassed/removed or not.
I'm searching forum, but I can't find any info how to validate if process is successed or not.
Current SPL version is 1.11.0000 (Unfortunetly haven't checked it before flashing) So I don't know if there is any change or not.
So anyone could please told me if can I safely flash new rom to my phone? Or sth went wrong with USPL and CID-LOCK is still active?
Regards

IF SPL is 1.11.000' then is CID unlock

How to get out of bootloader

Hi I was trying to install windows mobile 6.5 on my phone and here is what i did. First I ran the lolkwitz to cid unlock my phone then ran the CR86 thing i found. So after it was 100% done my phone is now stuck in bootloader mode. I tried to follow the instructions on http://forum.xda-developers.com/showthread.php?t=298613 but the link to wizzard love rom is broken

help!!

hi,
ive been trying to upgrade an artemis mobile to a custom rom...and ive gone through all the necessary steps (cid unlocking, etc)
however, my device is stuck at the loading screen...and nothing happens after that...
i can get into the bootloader....but thats about it...
any suggestions on what to do?? i'd really appreciate the help
thanks.

Does your phone gets into the bootloader....???
If yes, then after entering the bootloader mode(with color stripes),
connect your phone with the PC and launch the ROM Update Utility....
The ROM update will start.
If it does not, it means that you cell phone is still not CID unlocked...
Check your SPL as 1.11.0000
If it is so then your phone is CID unlocked, or else not....
Reply if any queries...