i've got a qtek s100, and for some strange reason it automatically disconnects any phone call that lasts longer then 6 minutes. although it is a nice cost efficiency tool, i've only got 6 minutes to end a call!!! so, anyone had the same problem en solved it? i've got the latest qtek rom and i didn't install the extended rom (hit the reset switch after screen calibration).
hi, i noticed when i made a call for more than 2 hours, the phone was disconnected at 1.59.59
i guess that's a safety something against getting high bills..
but 6 minutes is very short.
ask your provider.
i'm not quite sure whether this is a provider setting, because when i use this simcard in another gsm (a regularl one though), i can make calls as long as i want (and receive them as long as i want)...
futhermore, when my 'time' is almost up as to put it that way, then my backlight comes on (like some sort of signal) and it disconnects....??
but, i'll go ask my provider, maybe they know something more...
with kind regards,
dennis
How old is your battery?
an update:
since my front speaker is broken, i'm using a headset. i'm using the headset supplied with my old motorola (they have the same connector). this one disconnects a call around 6 minutes. i also tried another headset, this one disconnects immediately after picking up a call or after about 2 minutes.
when i am using the speakerphone, i can make at least calls of 8 minutes (then i disconnected it myself). with the original headset, same... i disconnected after 8 minutes, believing that this worked
so can someone confirm that only specific headsets actually work with this phone (since there is a talk and volume function in the cord of the headset). maybe this talk function generates a problem with other types of headsets? i assume that the cord itself must send a signal through the cord to the phone when i push the talk button (to pick up a call), assuming that the talk button probably cab also end a call, this could be the problem when using a different than the original headset. the phone appears to be working correct, because when i use the speakerphone function it does not disconnect. any comments are appreciated.
does anyone found problems with any bleutooth headsets?
btw. battery is oke, holds a charge acceptably
I had the same prob (altough mine simply disactivated the onboard mic at about 5 mins) I solved the prob by keeping the s100 from stand by. But I dunno if it can be your case...
I just wanted to mention that I have the same problem. After +/- 5 min. the phone call disconnects.
I'm using cable in ear headphones.
HI i have the same problem. i dont how many minutes i can talk but after acouple of minutes my mic will shut off i can hear thew other persons but they can't hear me. I hve no also tried to disable the power sver when unused (what i do not understand because i use the phone). Hopefully this will help but then i have the problem that the s100 will not switch off which is also not OK. Needs to much batterie.
Is there something in the registry that the phone sees that it is used even when i dont press any button only talk?
Hey folks,
I've been struggling with this issue for months now and couldn't find a solution yet. Had the same problem with my Polaris before.
When using BT Handsfree profile, either with my Jabra 250 headset or with my built in car handsfree (Parrot) I get a more or less big delay after accepting a call until the audio stream is transferred from my phone to the BT device.
Meaning, accepting the call in the car results in like 5 seconds delay until I can actually hear what the person on the other end is saying. Until then the voice is still routed via the phones builtin speaker, as if no BT device would be connected.
Same happens with my Jabra headset, though the delay is less there. Maybe 2-3 seconds sometimes.
I tried playing around with Shaps Advanced Config or HD Tweak Bluetooth settings, but no luck so far :-(
Could anyone who is using BT handsfree devices, especially car kits, tell me if you get your audio on your BT device right away, without delay on your BT device? If yes, please tell me exactly what settings you are using for your BT on the phone, e.g. Bitpool min/max, Audio Gateway on/off, Joint Stereo Yes/No etc.
Please let me know if ya using S2U2 as well, I think this could add up to the problem, though for me I still have the issues when I disable S2U2
thanks,
boba
i am using a Bury comfort BT and it rings 2-3 seconds b e f o r e my phone rings! i did not tweaked any settings in my HD. i am not using s2u2.
I also have a Parrot in car hands-free system. Have to say, whilst there are and have been some 'issues' (from time to time) a long delay when an incoming call is accepted isn't one I get.
I don't have the 2 programs you mentioned, as I'd not heard of them before - so I'm running my HD (as far as BT goes at least) in stock trim - FYI I have the auto-answer selected (in 'Settings>Phone>More') set to talk after 4 rings, as a personal pref.
I do have issues with the BT on these phones - I think it's a WinMo thing though, as it's been the same on all the WinMo phones I've had - the BT is pretty retarded unfortunately and it's the one major gripe I have with it and ultimately 'put up with' (very begrudgingly, as it's a feature I use a lot)
Issues are;
Occasionally the phone will answer instead of the car kit (if it's in my pocket - although I may have solved that by having pocketshield 'slide to answer' on there now)
It will NOT auto-answer at all on my BT stereo headphones NOR [more annoyingly] my Scala-Rider motorcycle helmet kit (where every other 'normal' phone I have had has done so with no issues at all)
Every now and again it will freeze the car-kit by showing that there is an active call, when there isn't - and the only way out of it is a soft reset of the HD itself
I only wish there was a fix/tweak for the BT in WinMo - but it seems that most programmers don't see this as a priority area and as such it's not been resolved - maybe 6.5 will address it...but I'm not holding my breath!
Hello, same problem with my Motorola bt350, with and without s2u2.
Same with stock ROM or with dutty's ROM and other.
Its a known win 6.1 BT stack issue.
Regards
T
@ boba23
If you find a fix for that issue please tell me!!! its so annoying
T
Same issues here. Anyone find a fix.
thought it was mine in car blue tooth that has this problem...good (or bad?) to know that it's not an isolated incident.
same issue...
I have parrot MK9000 and HTC BH S100 (stereo). The delay is the same. I do not think there is going to be a solution.
Ι have the transfer delay BT issue here too.... the others person voice is going out from the phone for 2-5 sec and suddenly its transferred to BT heasedet.
Preety annoying, it happens to all my ΒΤ headssets (Jabra , Samsung) the dead seconds just varies.
Plz guys anyone who has solved this let me know
boba23 said:
Bumping this thread up again, since I am still facing the delay issue. I am pretty sure it's not ROM related, since I had this issue with all 6.1 roms I tried. Right now using Topix 2.7.
Played around with Advanced Config BT settings again, but I still have that incoming call delay with my Jabbra BT250. Mostly takes 3-4 seconds, after accepting an incoming call till I hear sound on my headset. I really can't believe that this is an issue that only a few ppl are facing. I have nothing spectacular installed, even disabled S2U2 to see if that helps, but nothing :-(
boba
Click to expand...
Click to collapse
I think this has to do with a combination hands-free / rom version. I have a built in car kit and if I accept the call with phone answer I get the voice right away on the car kit. If I accept it on the radio, it will take 2-4 seconds before sound is transferred to car kit.
I've made another test on a parrot car kit, with same ROM version as before, and it behavior was diferent. If I accept the call on the car kit button, the sound is transferred immediately to the car, if I accept the call on phone button, I get instant sound, but on the phone - private mode....
I made also this test with a plantronics headset, and the sound is transferred right away to the headset either I accept the call on the headset or the phone
so
I am using topix 2.9.4 6.1 rom version - but already tested with several 6.1 roms and 6.5 - behavior is more or less the same
boba23 said:
Bumping this thread up again, since I am still facing the delay issue. I am pretty sure it's not ROM related, since I had this issue with all 6.1 roms I tried. Right now using Topix 2.7.
Played around with Advanced Config BT settings again, but I still have that incoming call delay with my Jabbra BT250. Mostly takes 3-4 seconds, after accepting an incoming call till I hear sound on my headset. I really can't believe that this is an issue that only a few ppl are facing. I have nothing spectacular installed, even disabled S2U2 to see if that helps, but nothing :-(
boba
Click to expand...
Click to collapse
Hi Boba, you're not alone I use BT sometimes as a backup.. and I too have an annoying delay of several seconds... at that very moment I think "hey where's the incoming call", I then hear the sound from the normal phone speaker, and when I switch to the normal phone again the sound is passed to BT ....
Bluetooth Incoming Call Delay
Has anyone come across a solution for this yet?
I have always had a 1-2 second delay in being able to hear the caller using my BT250 headset but, after installing the Orange update ROM, the delay seems to have increased to 3-4 seconds. The caller can hear straight away though.
I have just purchased a BT2020 headset and the delay is still 3-4 seconds.
I am not confident in installing different ROMs (because of my limited knowledge) but would install any that will eradicte this really annoying delay. Any suggestions?
alanu said:
Has anyone come across a solution for this yet?
I have always had a 1-2 second delay in being able to hear the caller using my BT250 headset but, after installing the Orange update ROM, the delay seems to have increased to 3-4 seconds. The caller can hear straight away though.
I have just purchased a BT2020 headset and the delay is still 3-4 seconds.
I am not confident in installing different ROMs (because of my limited knowledge) but would install any that will eradicte this really annoying delay. Any suggestions?
Click to expand...
Click to collapse
Just spoke with Orange Technical Helpdesk and they are sending me a new handset.......will publish result.
My phone has locked up hard 3 times while using my bluetooth headset. Once while the phone was idle and the other times while answering a call. The screen stays on but is unresponsive and none of the buttons work. I have to pull the battery to reset it.
Has anyone else had this issue? I am using a plantronics explorer 340.
Anyone?.......Anyone?......
i'm experienced the freeze as well. but I don't know if there'll be a solution to this.
now i'm searching this forum if there was a topic regarding this issue. maybe someone already figured it out.
No Bluetooth problems here. I don't use a Bluetooth headset but i do use a Bluetooth stereo headphones for the gym. Not sure if they work the same or not. I have been using the headphones for a week now with no problems at all.
Has anyone had issues with bluetooth staying connected consistently through a call?
I'm new to the Epic about a week or so ago. My bluetooth connects fine and stays paired. But during the call I will lose caller for about 5-7 seconds and they eventually come back. But I will miss part of the conversation.
I've had people tell me they can hear me during the silence but I can't hear them. It seems to happen maybe every third of fourth call. I didn't know if anyone knew of an issue or fix to the problem.
Hello,
I have not seen a thread on this nor has Google searches helped but I have an issue I wanted to post to see if anyone else was having the issue.
I use my phone for work and often have it on speaker phone, out of no where the call goes quite and the person on the other end of the call can not hear me anymore. Upon looking at the phone the speaker phone seems to get disabled and the call goes back to the handset. This happens often when using the speakerphone but certain calls are worse then others.
In one call I had the speaker phone get disabled about 10 times which was close to every 30 seconds or so. This is very very annoying, I have also rebooted the phone. At this time I am not modded and have less then ten apps installed and I am pretty sure none of the apps I installed are causing the issue.
I will note that I do have the phone connected to bluetooth a lot and when the issue happened I tried to disable the bluetooth while on the call but the issue persisted.
Is anyone else experiencing this issue?
Speaker phone and Bluetooth turning off at random
I am having the exact same problem. But for me this happens with Bluetooth and speakerphone. This is getting really frustrating for me and potentially dangerous when I try to switch back to Bluetooth while driving.
Have you figured out a solution for this yet ?