My phone has locked up hard 3 times while using my bluetooth headset. Once while the phone was idle and the other times while answering a call. The screen stays on but is unresponsive and none of the buttons work. I have to pull the battery to reset it.
Has anyone else had this issue? I am using a plantronics explorer 340.
Anyone?.......Anyone?......
i'm experienced the freeze as well. but I don't know if there'll be a solution to this.
now i'm searching this forum if there was a topic regarding this issue. maybe someone already figured it out.
No Bluetooth problems here. I don't use a Bluetooth headset but i do use a Bluetooth stereo headphones for the gym. Not sure if they work the same or not. I have been using the headphones for a week now with no problems at all.
Related
Hi,
When making calls I can't hear any sound at all....neither can the other person.
I can record and playback using the dictaphone function with no problems. I can also play back all sound using windows media player. and all other sounds within the XDA such as volume increase/decrease, beeps etc....
But when using the phone I can't hear anything :? ...does the XDAII have one speaker or two ? any help on this would be greatly appreciated...
Also holding down the green phone key does not activate the speakerphone function ?
BTW I have already done hard and soft resets
ROM VERSION 1.60.00WWE
ROM DATE: 12/03/03
Radio version 1.10.00
Protocol version 1337.18
ExtROM version 1.60.50
Regards
b11gy
Does the phone work with the headset.? There is only one speaker as far as I know but 2 settings for phone/pda.
yes the phone works with the wired and bluetooth head set !!
Is this something that just started happening, or has it done it since a ROM upgrade?
I have the same problem appart from I get no sound from the wired heatset either. Not tried bluetooth as i dont have a bluetooth headset.
How long are you holding down the button? You hold it down after dialling the number for about 3-4 seconds, you should then get a popup informing you speakerphone is active.
No volume on unit
I have the same problem and it comes and goes. Anyone know how to fix this bug entirely?
No sound during call, speakerphone works and headset works.
I have the same problem:
No sound during call, however speakerphone works and headset works well. There is no sound only when I use it as regular phone. Person on the other line can hear me well all the time.
When I raise volume during call I can hear peices of the person on the other line, at the same time as phone beeps that it reached sound maximum.
This happened after phone was dropped and it hard reset itself automatically.
I am trying to reboot it now with different ROM.
Headset jack hasnothing to do with it, since speakerphone works well.
If anybody has any idea please share.
Thanks
xda 2 sound problem
Unfortunatley I have the same problem ;/
Identical as b11gy
Could anyone help us?
After rom upgrade the problem is identical
Hey.. did it happen after unlocking the phone?
I've got the same problem, Sound and mic work perfectly until I call somebody, I've got a wired headset, the speakers work during a call, but the mic doesn't.
I've just updated the phone from wm3 to wm5, but I had the problem before I updated, and i'n still having it. Does somebody have a solution for this problem?
The problem is not in Windows, because I updated windows from 3 to 5, it's not a hardware problem, because the notes-function work fine.
in an other topic I read some people think the phone is in headset mode, but if that is the case, mediaplayer etc. would only play via the headset.
Does nobody have an idea where to look?
I cant recall any more what was exact situation but as far as I remember I had same problem on 1010. Please check that part of the forum (wallaby), maybe it help.
A lot of pople had that with 1010, as far as I remember somehow we fonund that solution that worked for most of the people was to leave qtek on a dry place for a day and then charge it. That was the way I solved the problem second time and first time I patched it and it started to work (win 2003).
Heres the thread http://forum.xda-developers.com/showthread.php?t=222433 maybe it help someone.
Hi all
Sorry, if this has been answered before. I've searched about an hour now in the forums, but couldn't find any solution.
I have a TyTN II and a Motorola BT headset H700C. This combination worked like a charm so far.
Today suddenly, I cannot start or take over incoming calls anymore.
Analysing the problem I detected, that my headset is suddenly only available as a hands-free device instead of a headset device to my phone.
So I repeatedly tried to delete pairing information and re-pairing the headset to the phone, but no success. I always only get it as a hands-free.
The strange thing is, that I'm not aware of any config changes or newly installed software on my phone. Still I suddenly have this weird behaviour.
Does anybody have a hint for me? Would appreciate any, so I can get my headset back to proper functionality again.
Thanks
McYoda
mcyoda from urt? lol.
Hey i just saw an update on the HTC website that addresses a bluetooth issue.
You have to sign up and all that good ****. Then select your device. Theres also a camera fix if you were getting the maze pattern.
I have all sorts of connection issues w/ my motorolla s99 im constantly having to repair it seems when i use the wall plug. IF both items are charged fully, i can walk away (out of distance) music will stop, and when i get close enough it repairs automatically. Something has bugged me out for sure, still working on my issues. (thinking charging the bluetooth on the car charger might be ****ing it up).
I'm running DCD 3.0.0 rom and I found that everytime I turn off my bluetooth headset and bluetooth on my phone that when I go to make a call I cant hear anything from my phone, I've tried turning on the speakerphone too but nothing, I don't know if the other end can hear me but the only way I can fix it is by soft-reseting...
is this a known problem? is there a simple fix? or am i doing something wrong here?
t0mmyr said:
I'm running DCD 3.0.0 rom and I found that everytime I turn off my bluetooth headset and bluetooth on my phone that when I go to make a call I cant hear anything from my phone, I've tried turning on the speakerphone too but nothing, I don't know if the other end can hear me but the only way I can fix it is by soft-reseting...
is this a known problem? is there a simple fix? or am i doing something wrong here?
Click to expand...
Click to collapse
Hmmm... is the volume turned all the way up in the system settings along with the volume for calls?
I have this same problem. I think it is related to Voice command. Do you have VC?
This happens to me 1 or 2 calls after turning off my headset. When I turn the headset back on, the audio works again. I tried turning BT off but that didn't do it along. The fix (so far, I think) is to activate VC (push the right mapped button), and say "cancel". This may need to be done in conjunction with turning BT off. That may reset the audio and ensure it is mapped through the phone speaker, rather than the headset.
I am not 100% sure on this fix yet, as I just figured it out this morning. I think it is related to VC because VC obviously has other problems related to BT.
-BD
I've had this problem sporadically with Plantronics 855. I found that turning off BT before the headset seems to cause my problem. When the problem occurs, a soft reset is the only thing that gets audio back. In general, stock 2.17 worked better with the 855 than 3.35 (I'm now using DCD 3.0.1). The headset will occasionally redirect to the handset unexpectedly and will not resume playing audio after a call. None of this is a deal breaker, just minor annoyances.
bump for a fix please
I have a german version of X1 , almost everyting works fine but with a little problems. i am a 3-year WM user and know the basic stuffs of this OS.
but the worst thing is the mic on headset dosen't work at all, the button and the speaker are good.
dose anyone have the same problem with me? and what should i do?
thanks
On my phone the headset jack needed a really hard push to go all the way in. Make sure you really have pushed it as far as it goes. But I guess you already tried that, huh.
Should be an easy thing to get replaced at the store though.
Returned my first X1 because of a not-working button >and< microphone of the headset (ordered via internet). The replacement phone had the same problem.
In the accompanying shop, which I finally visited, also a third phone did not work. They tried a bit more when I left and discovered that it can work if you connect the headset >when< a call is received...
Also, they reported that it is not a know problem for the X1.
Well, with three not-working phones it seems to be a problem!
Maybe a headset problem instead?
my headset doesn't work if the phone is on vibrate or no sound mode. If I change the phone to normal then the headset works. Touch cruise headset works on vibrate mode. I am not sure if other people have the same situation. I only the put phone in vibrate mode at work so if I want to use headset I just change phone to normal, life goes on.
same problem
By using voice recording it uses the mic from the phone. i think it's a problem of the software. It does not switch... maybe a registry issue...
i have the same issue, and its a hardware problem, because if you plug it a couple of times, sometimes works and sometimes dont...
someone has found a solution to this?
I had this problem with my G2 as well. Every time I have bluetooth on and then go to turn it off, it causes the phone to reset.
I have tried different combinations of control to try and differentiate what might be the cause. GPS on and off, Wi-Fi on and off etc..None of those seem to matter. Just whenever I turn off bluetooth the device resets.
Any ideas? Maybe something that will be addressed in a future bug fix update.
Nobody having the same issue? No ideas?
CBConsultation said:
Nobody having the same issue? No ideas?
Click to expand...
Click to collapse
Just tried mine - does not reboot (mine is temp rooted - should not make any difference).
UPDATE - i also connected a headset first.
I suppose I should clarify the circumstances so testing might be quicker.
If I simply turn bluetooth on and off there is no issue. But when I connect a headset and use as normal, if I turn bluetooth off it reboots the phone. I had the exact same issue with my G2 as well.
Yup, my MT4G does this as well. It's somewhat random, it only happens when I'm disconnecting the BT in some fashion but not every time.
This past time I still had the BT headset connected, all I did was end a (voip w/ csipsimple) call that was over the BT. Just closing the audio channel was enough to kill it.
I'm using a jawbone icon, are you using an aliph headset as well?
Happened to me on my G2, my MT4G should be here tomorrow. It doesn't happen every time, I'm looking for the cause and take note of what I was doing or what app was open when it happens.
I'm using a Motorola Roadster.
I've been unable to determine the common denominator so far... The only thing that is constant when this happens is I have the Car Home app set to open and activate dock mode whenever my Motorola Roadster Bluetooth Speakerphone connects to my phone.
Anybody else have this setting configured??
Agh, I thought it was only me and only when I was using a SIP soft phone connected to Trixbox... hmmm
hah2110 said:
Agh, I thought it was only me and only when I was using a SIP soft phone connected to Trixbox... hmmm
Click to expand...
Click to collapse
Happened to me once also, but also had two other restarts without the bluetooth being involved. I don't think I like this phone.
I called TMobile about it and they just told me to do a complete reset on the phone. I figure I'd try that in case the 2.2->2.2.1 OTA caused something to be messed up but it didn't make a difference.
I have noticed that when it is going to reboot, the "Bluetooth headset disconnected" message doesn't appear when I turn off the headset. The phone continues to work for a few seconds with the bluetooth connected icon still showing (the dots on the side of the BT icon) then it reboots.
hah2110 mentioning sip got me thinking.
I had sipdroid running in the background... I've disabled it and so far haven't been able to reproduce the reboots. With it on I can cause the reboot after two or three disconnects with both a Jawbone Icon and a Blueant Z9.
To be clear, with sipdroid running I can reproduce the reboots *without* actually placing any calls with sipdroid, but with it completely off the phone has been stable.
Interesting... SipDroid does say BT is experimental. I always figured it was problematic because it is using different protocols. Basically [in my mind at least], you are trying to "pretend" that the phone is on a phone call when it is really just using data and other resources of the phone all combined to seem like a phone call. I've had other issues with volume (ringer vs. in-call) when using SIP clients because of that very reason. 3CX supports bluetooth but doesn't flag it as experimental.
Please post questions in Q&A section.
Whosdaman said:
Please post questions in Q&A section.
Click to expand...
Click to collapse
The OP was posting a problem, not an inquiry.
So, after some hunting and tweaking I seem to have found at the very least an answer (maybe).
After rooting the phone I seem to not be having the issue of bluetooth causing reboots after it is turned off. Not sure what that means but I have tried to replicate the problem and have been unable to so far.
Ok I have been experiencing the same issue.
However this is my situation.
I never experienced this until I installed Bluetooth Audio Widget.
A handy app that routes all audio to the BT headset, so you can listen to music on your mono headset. They do state that in all froyo versions it has a known issue where if you shut the headset off before disabling BT it will cause a reboot.
I have used the app for several months knowing this and not having a problem with that glitch. However after awhile it became an issue where it would reboot regardless of the order that you would shut them off.
And all that took place ONLY after enabling the widget.
In just the past week+ it has now been causing the reboot issue no matter what.
It will now reboot regardless of my enabling the widget or not.
Walk out of range of the phone with the headset enabled and it causes a reboot.
Turn off the headset-reboot
turn off BT-reboot
This used to only take place AFTER I had enabled the Bluetooth Audio Widget.
It was an acceptable glitch when it was just caused by the widget.
Now it's become unacceptable.
This is on a stock MT4g non rooted.
with a Plantronics Explorer 240