Hi,
When making calls I can't hear any sound at all....neither can the other person.
I can record and playback using the dictaphone function with no problems. I can also play back all sound using windows media player. and all other sounds within the XDA such as volume increase/decrease, beeps etc....
But when using the phone I can't hear anything :? ...does the XDAII have one speaker or two ? any help on this would be greatly appreciated...
Also holding down the green phone key does not activate the speakerphone function ?
BTW I have already done hard and soft resets
ROM VERSION 1.60.00WWE
ROM DATE: 12/03/03
Radio version 1.10.00
Protocol version 1337.18
ExtROM version 1.60.50
Regards
b11gy
Does the phone work with the headset.? There is only one speaker as far as I know but 2 settings for phone/pda.
yes the phone works with the wired and bluetooth head set !!
Is this something that just started happening, or has it done it since a ROM upgrade?
I have the same problem appart from I get no sound from the wired heatset either. Not tried bluetooth as i dont have a bluetooth headset.
How long are you holding down the button? You hold it down after dialling the number for about 3-4 seconds, you should then get a popup informing you speakerphone is active.
No volume on unit
I have the same problem and it comes and goes. Anyone know how to fix this bug entirely?
No sound during call, speakerphone works and headset works.
I have the same problem:
No sound during call, however speakerphone works and headset works well. There is no sound only when I use it as regular phone. Person on the other line can hear me well all the time.
When I raise volume during call I can hear peices of the person on the other line, at the same time as phone beeps that it reached sound maximum.
This happened after phone was dropped and it hard reset itself automatically.
I am trying to reboot it now with different ROM.
Headset jack hasnothing to do with it, since speakerphone works well.
If anybody has any idea please share.
Thanks
xda 2 sound problem
Unfortunatley I have the same problem ;/
Identical as b11gy
Could anyone help us?
After rom upgrade the problem is identical
Hey.. did it happen after unlocking the phone?
I've got the same problem, Sound and mic work perfectly until I call somebody, I've got a wired headset, the speakers work during a call, but the mic doesn't.
I've just updated the phone from wm3 to wm5, but I had the problem before I updated, and i'n still having it. Does somebody have a solution for this problem?
The problem is not in Windows, because I updated windows from 3 to 5, it's not a hardware problem, because the notes-function work fine.
in an other topic I read some people think the phone is in headset mode, but if that is the case, mediaplayer etc. would only play via the headset.
Does nobody have an idea where to look?
I cant recall any more what was exact situation but as far as I remember I had same problem on 1010. Please check that part of the forum (wallaby), maybe it help.
A lot of pople had that with 1010, as far as I remember somehow we fonund that solution that worked for most of the people was to leave qtek on a dry place for a day and then charge it. That was the way I solved the problem second time and first time I patched it and it started to work (win 2003).
Heres the thread http://forum.xda-developers.com/showthread.php?t=222433 maybe it help someone.
Related
I think this is a different problem to the ones already posted, I'm new to this so please bear with me.
The microphone on my XDA mini s is rubbish so instead I like to use the supplied headset which is fine. You could hear calls and music at the right levels and more importantly meant I wasn't shouting....
but now the volume coming through the headset is very very low, the slider on the headset is pushed to the max and the slider on the phone is also at the top. Without changing any settings playing music in Windows Media player is fine. Why would the voulme for calls suddenly be different to the volume levels in other apps?
Hope somewhere here can help.
Thanks
I have the same problem, since upgrading to 2.24 rom, over bt headset. Hope someone who knows more reads this too...
I haven't upgraded any roms, this problem has just appeared. Another part of this problem is the person I'm calling via the headset say they get an echo of their own voice. Anyone one got any ideas?
Thanks
Problem solved, it was sent back to O2 and they said they changed the circuit board!! Easy fix really!!! :?
man, i dont want to send mine in... i need it on a day-to-day basis for my business. how long were you without it?
So, my phone stopped working a few days ago. I've been running WM6 for quite some time now and I've even tried going back to Tmobile's ROM. Basically, when I receive/make a phone call, I can ONLY hear the person if I put them on speaker. They can hear me regardless, but I can't hear them. Pretty annoying.
Any ideas?
Heh! Quite a coincidence!!! I cannot hear anything from the headset either and it happened a short while after I upgraded to XDA6. It work fine with the stereo headset as well as with a BT one. The difference in my case is that I cannot switch to speakerphone. The phone is deaf without a hands-free device.
I have posted a separate thread on my problem - here it is
i have the same problem. phone is dead without a handsfree it happened to me last night all was good, i was listening to music to handsfree and removed them to make a call and it didnt work anymore..i reinstalled the rom, but no sound..any help anyone?
maybe the phone is stuck on handsfree..it things that the handsfree is plugged in or something?
problem solved trustworthy, i've put the jack in and out a few times..and now the sound works there is a switch that is pressed when you plug in the jack and maybe it got stuck on handsfree..try pressing it a few times..i don't know. now my phone works. i'll never plug in a handsfree again
I had the same problem--it was still under warranty...new MDA was the solution.
By the time it goes again I hope the next generation will be here!
I have the same problem as lilcam, the earspeaker is dead. I had the same problem once, and the service chage the speaker, first and the ringer, later and stars working just fine. Now, the silent speaker hits again and service says is not the same problem and they cant repar it. Does anybody have a clue?
Sisqo said:
problem solved trustworthy, i've put the jack in and out a few times..and now the sound works there is a switch that is pressed when you plug in the jack and maybe it got stuck on handsfree..try pressing it a few times..i don't know. now my phone works. i'll never plug in a handsfree again
Click to expand...
Click to collapse
Thanks for the hint, but I REPLACED the handfree jack and it still wouldn't work without the headset
The people, who got it serviced told me that there was a problem with the mmainboard, that they cannot deal with. As I've mentioned in my thread, they also told me that a faulty handsfree jack was a frequently occurring problem with the 9100. I would recommend to pdebeitia and Sisqo to try replacing the jack. Hopefully it might help...it did not work for me though...
BTW, pdebeitia and Sisqo, what ROM are your MDA's running or were runnig at the time when it happened?
I have a german version of X1 , almost everyting works fine but with a little problems. i am a 3-year WM user and know the basic stuffs of this OS.
but the worst thing is the mic on headset dosen't work at all, the button and the speaker are good.
dose anyone have the same problem with me? and what should i do?
thanks
On my phone the headset jack needed a really hard push to go all the way in. Make sure you really have pushed it as far as it goes. But I guess you already tried that, huh.
Should be an easy thing to get replaced at the store though.
Returned my first X1 because of a not-working button >and< microphone of the headset (ordered via internet). The replacement phone had the same problem.
In the accompanying shop, which I finally visited, also a third phone did not work. They tried a bit more when I left and discovered that it can work if you connect the headset >when< a call is received...
Also, they reported that it is not a know problem for the X1.
Well, with three not-working phones it seems to be a problem!
Maybe a headset problem instead?
my headset doesn't work if the phone is on vibrate or no sound mode. If I change the phone to normal then the headset works. Touch cruise headset works on vibrate mode. I am not sure if other people have the same situation. I only the put phone in vibrate mode at work so if I want to use headset I just change phone to normal, life goes on.
same problem
By using voice recording it uses the mic from the phone. i think it's a problem of the software. It does not switch... maybe a registry issue...
i have the same issue, and its a hardware problem, because if you plug it a couple of times, sometimes works and sometimes dont...
someone has found a solution to this?
Hello XDA crew,
I have some problems and I hope you can help me with that. Xperia phone is really cool but one thing for me is really annoying. And that is the calling performance of Xperia.
These are the main problems:
1. When I plug in the headset, the ringtone plays both on the headset speakers and the phone speaker. Is there a way to let the ringtone play only on the headset speakers?
2. When I plug in the headset, the microphone of the headset isnt active. Only the microphone of the phone is active. So, people can not understand me when I speak to the headset microphone. But they can hear me when I talk to the microphone of Xperia.
These are some other problems but not so important for me:
3. The volume of the call is too high. Even when I set the volume low, people can hear the person who I am talking with.
4. Microfone of Xperia get active after for about two seconds when I answer the phone. So, I have to wait for about 2 seconds to say 'hi'.
5. The answer button of the headset doesn't work.
Can someone help me with this problems or just one of these problems?
Note: I have hardreset my phone two times and reinstalled the ROM software one time via SEUS. I didnt get any result. I have the original Vodafone R2 software.
I have the 2 second delay too. Using gtrab wm6.5 custom rom
M.Ozturk said:
Hello XDA crew,
5. The answer button of the headset doesn't work.
Click to expand...
Click to collapse
Unplug the headphone jack during a call and plug again (during the same call) and press the answer button. It will terminate the call and start working (until your next xperia soft reset). Double-press the answer button when idle, and it will repeat the last call. If that doesn't work, try it again and again after the first trick of plugging/unplugging and it will work on your 4th/5th try. From then on, all answer/hangup/'repeat last call' functions will work. Until you soft reset of course.
I'm calling a toll free (service center) number to do the trick whenever I have to use the handsfree.
VanAuberjim said:
Unplug the headphone jack during a call and plug again (during the same call) and press the answer button. It will terminate the call and start working (until your next xperia soft reset). Double-press the answer button when idle, and it will repeat the last call. If that doesn't work, try it again and again after the first trick of plugging/unplugging and it will work on your 4th/5th try. From then on, all answer/hangup/'repeat last call' functions will work. Until you soft reset of course.
I'm calling a toll free (service center) number to do the trick whenever I have to use the handsfree.
Click to expand...
Click to collapse
It works (on a WM6.5 rom also)
Nice little trick there, thanks
Tnx for the trick vanauberjim. So it seems more like a hardware problem. Anyway, I will try it tomorrow. Hope that the main problems also be solved like this.
Both 2. and 5. get fixed with the trick, but I just hope SE will find a permanent fix. It's not a solution to unplug and replug the headphones during calls.
My question is: are we the only 3 persons that have this problem? Is this problem originally caused by the headset hardware? Is it caused because the plug is so tight that it severely scratched the middle ring in the headphone jack and it can't always make a connection with the middle ring (the microphone one)? How many people have this problem?
Have the same problem
I do have the same problem and workaround works for mee to but it is annoying!
@vanauberjim, I can ensure you that we are definitely not the only one with these problems. I saw on a popular dutch forum that a lot of people have exactly the same problem.
M.Ozturk said:
@vanauberjim, I can ensure you that we are definitely not the only one with these problems. I saw on a popular dutch forum that a lot of people have exactly the same problem.
Click to expand...
Click to collapse
Have you tested with another hands-free set ? is it the phone or the hands-free causing the problem?
I have send my hands-free to SE yesterday so they will check it and if it was ok I will send the phone back.
About 3 seconds of delay when I answer , I haven't done anything yet , is it a bug , I mean do we have this problem or every X1 out there.
Ok, post back soon because if it's faulty hands free we only have 6 months warranty on handsfree (and battery) and time's running out. The phone has 2 years warranty so we have plenty of time for its handset's faults.
I got the same problems, is annoying BTW ... and about the trick mmm quiet annoying as well, but if is the only way to make it work, no more than just do it.
shwan_3 said:
Have you tested with another hands-free set ? is it the phone or the hands-free causing the problem?
I have send my hands-free to SE yesterday so they will check it and if it was ok I will send the phone back.
About 3 seconds of delay when I answer , I haven't done anything yet , is it a bug , I mean do we have this problem or every X1 out there.
Click to expand...
Click to collapse
I think it's a phone problem. I use the original headset and sometimes when I plugin the headset the phone calles the person who I have called earlier. Now I have another stupid problem. When I plugout the headset, the phone still thinks that the headset is plugged in on the phone. I see the headset icon on the phone and when I call someone, I cant hear and speak with the person. Only way I can do this is to plugin the headset again and speak that way. When I plugin and plugout for several times, the headset icon dissapears and I can make my call again without a headset. I think that alle these problems are because the jack plug doesn't function good.
Another issue. I call it issue because it's not a problem, but just a stupid choise of sonyericsson:
- Some soundnotifications during calling like 'busy tone' or 'waiting tone' plays from the main speaker of the phone in instead of the calling/ear speaker. This way, all the people who are sitting next to you hears that the person who you are calling is busy
It will be for the 4th time that I go to the shop with a problem. So I will ask to the shopper if I can choose another phone. I'm thinking about the Touch Pro 2. I'm sick of the problems of Xperia. Don't think that HTC will have the same problems.
Hi there,
Can anyone help me solve this problem:
Ik have a Sony car radio with a BT hands free function (MEX-BT2500) in my car. When I make a call, the radio stops and I can speak hands free, hearing the conversation on the car-speakers. All nice, like it should be.
Problem is when I receive a call. The radio stops and I hear a ringtone (not my phone-tone though ). When I awnser the call, the caller can hear me, but I can't hear him, unless I take the phone in my hand and put it on my ear. The sound doesn't come through the car-speakers. So an incoming call can't be awnsered handsfree.
With my former phone (nokia 6230), it was no problem. Anyone knows how to solve this?
If it was the same as my problem, turn up the volume on the phone
My phone was the exact same, for some reason when it connected it was turning the volume right down!
Hope yours as as simple
todd69 said:
If it was the same as my problem, turn up the volume on the phone
My phone was the exact same, for some reason when it connected it was turning the volume right down!
Hope yours as as simple
Click to expand...
Click to collapse
Unfortunately my problem is not that simple. I got an incoming call yesterday when I was driving, but again no sound. When I called back, there were no problems. Does anyone else have a solution?
Well, I don't have the Sony-stereo, but I've got a Pioneer with BT. I have bumped into several issues with it, and the solution is the same every time:
-first, if you have a settings-option called something like "reset BT-memory", try that one, and pair phone again.
-If that doesn't work, next step is full reset of the stereo, meaning you pull it out and disconnect the power. Then plug it back in, and re-pair phone.
This at least did the trick for me, now voice-dial works perfectly, and I even have "BT Audio", meaning I can play my Topaz' music on my carstereo without hassle.
Could also be something else simple, you are using the stereo to answer and not the handset?
If I answer using the phone with my stereo then I get the same issue as you, answer using the stereo and all is well