Woohoo just got my TyTn - 8125, K-JAM, P4300, MDA Vario General

Just got overnight FedEX I will be posting some pics so stay tuned! Any requests?

Where did you order it from?

nickcerda said:
Just got overnight FedEX I will be posting some pics so stay tuned! Any requests?
Click to expand...
Click to collapse
YES!!
Can you run SPB benchmark so i can compare the proccessor to my XDAIIi. Would love to see how well it preforms next to my over-clocked machine. After more than 18month differance i'm hoping the TYTN performs well!
cheers!

IT CAMEEEEE FROM EBAYYYY (a little somethinf for ATOS fans) Sure I can benchmark it, let me know what program you want me to use.

nickcerda said:
IT CAMEEEEE FROM EBAYYYY (a little somethinf for ATOS fans) Sure I can benchmark it, let me know what program you want me to use.
Click to expand...
Click to collapse
can you use this if it works on wm5
http://spbsoftwarehouse.com/products/benchmark/?en
cheers

What test do you want me to run...just the CPU?

I would be v interested in some battery tests - compared against the wizard if poss. Seen v little info on this so far.

nickcerda said:
What test do you want me to run...just the CPU?
Click to expand...
Click to collapse
that will do for a start!

What provider do you have? Also does the 3G work on that provider? Also what speed do you get on previously mentioned connection?
I know that's a lot to ask, thanx in advanced =)
Later; Lew

nickcerda said:
What test do you want me to run...just the CPU?
Click to expand...
Click to collapse
Run the SPB benchmark, and give me the values, so I can have another graph that has Charmer, Magician and others. See example here
http://forum.xda-developers.com/viewtopic.php?p=313810&highlight=#313810
Anyone know where I can get Wizard SPB benchmarking results?

I have Cingular, I don't get a signal in my house. I only get UMTS down the road. I did go somewhere earlier and I did get a UMTS signal, and I only had a chance to open IE and browse to google.com. It was much faster than the wizard. I will run speed tests when I go to my girlfriends in about 2 hours.

hanmin said:
Anyone know where I can get Wizard SPB benchmarking results?
Click to expand...
Click to collapse
I can run them on my wizard.
hanmin said:
Run the SPB benchmark, and give me the values
Click to expand...
Click to collapse
What benchmarks do you want run? All of them?

Band Tab?
Could you check if you have this Band Selection Tab in Phone Settings. I have been searching for the registry details of HKLM\SOFTWARE\OEM\PhoneSetting
Would you please do me this favor posting the registry details of the above entry
My device has ShowTimeZonesPage and ShowPIN2Page only. I wonder if yours does anything else. Still working on adding this Band Selection TAB.
Thank you in advance!

I do have the band selection tab. Here is the registry export from that key.

Band Tab
Many thanks!!! You are the best. I tried to copy your settings and my phone (Cingular 8125 with Dopod 838 ROM) accepted them. Sure thing my model has no guts to support UMTS etc, however I've got these long awaited and "all-the-websites-and-forums" searched settings in place. Having tested my Cingular SIM on manual network type switching (GSM/WCDMA/UMTS/AUTO resulted in default of AUTO net pickup. Soon after I open the Band Tab all visible selections go transparent. Well there got to be something else that holds this selection in Auto intstead of for instance GSM only. Despite all this and that I am happy to have the TAB.
Thanks again!!!

nickcerda said:
I can run them on my wizard.
What benchmarks do you want run? All of them?
Click to expand...
Click to collapse
All of them would be good, but I guess that you can skip the battery test as it may take forever. Other benchmarking can be all done less than 2 hours. It would be nice if you can hardreset your device to avoid having other applications hogging the resources.

It would be super to see what inside of the HTC is hidden. I would love to compare your new HTC reg key to the previous HTC Wizard. If it is not too much asking would you post this one: HKLM\Software\HTC
Thank you!

hanmin said:
nickcerda said:
What test do you want me to run...just the CPU?
Click to expand...
Click to collapse
Run the SPB benchmark, and give me the values, so I can have another graph that has Charmer, Magician and others. See example here
http://forum.xda-developers.com/viewtopic.php?p=313810&highlight=#313810
Anyone know where I can get Wizard SPB benchmarking results?
Click to expand...
Click to collapse
Hi!
For your info, everything is already been tested here!
http://www.solopalmari.com/content/view/2039/38/
But there are lots of review about TYTN, if you want to read them, please join my group HTC TYTN at:
http://groups.yahoo.com/group/TYTN/

Okay I got a chance to run some UMTS speetests from broadbandreports.com mobile ste. I ran four tests o the 1MB test here were the results in order:
343 kbits/sec
887 kbits/sec
887 kbits/sec
832 kbits/sec
I had 1 bar of reception.

HTC TyTN registry
It would be super to see what inside of the HTC is hidden. I would love to compare your new HTC reg key to the previous HTC Wizard. If it is not too much asking would you post this one: HKLM\Software\HTC
Thank you!

Related

Turbo Modus found on Pro/VPA4 !!!

Hi !
All the times i´m sure, that the same Turbo-Modus from WM 2003SE exist deep in the WM5 too.
People call me, Jay, you are crazy!
Since one Week ago i find the Turbo-Modus !
We tested it on the German-Forum http://www.ppc-welt.info/community/showthread.php?t=81949
It´s the same Speed-Up Feeling like on the XDAIIi or other Devices with the Turbo-Modus On.
No 50% or 1000%- Booster, but you can feel a better "Easy-Going".
It works on some other WM5-Devices too !
First, you only take a "new" Key to the Registry, copy the Power-Programm from WM2003 SE, start the Power-Programm,
go on new Processor-page and:
The Turbo-Modus exist and can be activated !
Here is the key:
HKEY_Local_Machine\ SOFTWARE\HTC\Power
Put a D-String with Name "ProcessorPageFlag" 1 Dec.
I made a reg.-File who write the key, and i put it with all needed files in one .zip-File.
Password: Agent Jay
First try the reg.-File, than copie the Files, if you want, you can overwrite the files in the Windows-Directory, but backup the originals !
Put the power.lnk File in the autostart/startup Directory, and now, after every Softreset, you can activ the Turbo-Mode.
It works perfectly, you can only feel the Speed-Up on really full Memory Pro´s, not really on empty Pro´s. Don´t know why.
Problems: After a Softreset it goes on "Standard-Mode", it must be activated again manual by Hand.
But these five Seconds for restaring Turbo-Modus during a startup are OK for me.
Anyone can it handle or find a way, to save the turbo-modus forever ?
I hope you like it !
Greetings from Germany,
Agent Jay
???
Is it workin or just eating up my alredy bad battery? :/
RE
I just installed yesterday on my QTEK9000 and I 'think' its smoother in operation.
Not very sure about it
As I''m running XCPUScalar and some other speed up registry tweaks if there's any speed increase its definitely not noticeable
Thanks
It´s not possible to detect the faster speed, because it don´t push up the megaherz-rate !
But you can feel the faster performance.
No more power using from your battery !
So it speeds it up without speeding up the processor or using any more battery power? Hmmm. Surely if that were possible then the "Turbo" mode would be the default mode and no other mode (like "slowmo" mode) would exist?! :wink:
Could it be that the Turbo page is something that is built in to WM5 but which was disabled on the Universal since it does not support it?
Seems to work on my Magician
Can anyone pinpoint the actual benefit of this tool?
Exactly what difference is experienced??
The benefits are a faster and a feeling of "liquid" working.
Thats it.
Menus open faster, Windows open faster, the handling is therefore better.
No longer hickups, ...
It´s like Aspirin for a guy with headache.
After the Aspirin he don´t run faster, but he have no longer headache :wink: and make a better work.
I think, every little speed up of our device- help us !
Try it or leave it.
Regards,
Jay
It really wont make a difference on the HTC Universal because it already has a 520 MHz processor. With the PDA2, the processor was underclocked to 416 Mhz and the power-up option was useful there.
UD.
Thats not correct. It works on the Universal too !
First users here and some more users on german forum had tested and feel
more Speed. You can´t test it with benchmark-apps, because you don´t speed up the processor. Don´t know exactly, what it is, but it works.
Test it yourself and than reply !
Greetings,
Jay
Alright Jay, will keep you updated
Cheers.
Uhm... it *seems* to do something to the general responsiveness of the Universal, the hourglass appears for less time now.
I'll keep testing it... thanks for the clue.
Are you sure with this password. It is not working to unzip it !!!!!!!!!
CAB for your Turbo
i made cab files for this. easy installation.
i think this can make it easy!
thanks! AgentJ!
Re: CAB for your Turbo
Asukal said:
i made cab files for this. easy installation.
Click to expand...
Click to collapse
Thank you MR.Asukal!!
Gooooooooood Job!!!
Re: CAB for your Turbo
siam_breeze said:
Asukal said:
i made cab files for this. easy installation.
Click to expand...
Click to collapse
Thank you MR.Asukal!!
Gooooooooood Job!!!
Click to expand...
Click to collapse
not thanks to me but to AgentJ, i had just assembled his mirachle!
Camrade Siam_breesze!, you must use Japanese Flag on your prifle,
not any others! or you wll be missed AIKOKU_set in future! :lol:
Does it really work?
Melty said:
So it speeds it up without speeding up the processor or using any more battery power? Hmmm. Surely if that were possible then the "Turbo" mode would be the default mode and no other mode (like "slowmo" mode) would exist?! :wink:
Could it be that the Turbo page is something that is built in to WM5 but which was disabled on the Universal since it does not support it?
Click to expand...
Click to collapse
when i modefied Power.exe in Jasjar to mui,
i have found this entry in that resources.
are there any way to visuable those entry in the Power.exe???
[in the String Table 260]
4144, "Speed"
4145, "Auto (400MHz)"
4146, "100MHz Run mode"
4147, "200MHz Run mode"
4148, "400MHz Run mode"
4149, "100MHz Turbo mode"
4150, "200MHz Turbo mode"
4151, "300MHz Turbo mode"
4152, "400MHz Turbo mode"
4153, "Change <file:ctlpnl myCpl,5{beam}> settings to conserve power."
4154, "Backpack"
4155, "Backpack battery:"
4156, "Over Heat"
4157, "Battery Bad"
4158, "Unknown"
When VGA was used in full scale, a set screen where this processor was changed to the turbo mode was not displayed.
It seems to be able to use it only for QVGA.
I am using OzVGA.

Novii Remote now works on Wizard!!

novii remote deluxe now works with OMAP 850 CPU
:wink:
download the lastest beta
http://www.novii.tv/up/forum/download.php?id=720
Guybrush said:
novii remote deluxe now works with OMAP 850 CPU
:wink:
Click to expand...
Click to collapse
Where is your source of info? - scanned the whole site and all i can find that its not compatible with imate kjam.
p.s. when you post please add more info it just frustrates forum users!
EDIT - found it version 4.0 beta does support omap 850
download link here http://www.novii.tv/up/forum/download.php?id=720
Have you tried it on your device and does it work?
meschle said:
Guybrush said:
novii remote deluxe now works with OMAP 850 CPU
:wink:
Click to expand...
Click to collapse
Where is your source of info? - scanned the whole site and all i can find that its not compatible with imate kjam.
Have you tried it on your device and does it work?
Click to expand...
Click to collapse
http://www.novii.tv/up/forum/viewtopic.php?t=2667
yes.. its work on my MDA Vario.. 2,5 meters max or even less
thout said:
meschle said:
Guybrush said:
novii remote deluxe now works with OMAP 850 CPU
:wink:
Click to expand...
Click to collapse
Where is your source of info? - scanned the whole site and all i can find that its not compatible with imate kjam.
Have you tried it on your device and does it work?
Click to expand...
Click to collapse
http://www.novii.tv/up/forum/viewtopic.php?t=2667
yes.. its work on my MDA Vario.. 2,5 meters max or even less
Click to expand...
Click to collapse
Thanks thout
six meters for me on the same air line of irda led of my TV i can't try more
Not getting anywhere near to six meters. Not even getting a metre. Useless really.
Edit : You have to be dead in line with the IR on the TV and yes you can get a reaction from further away. Still very poor though. Would be quicker to get the tv button than piss about with this.
as the most of PDA, wizard doesn't have a CIR chipset for IrDA and the type of led is different shape so u must have a good air line with consumer device to work... but if you have seem work enogh well at least on mine... i tried it on two TV and works good :wink:
It does work on the MDA; got an email from Novii over the weekend with the new version; however as noticed above, range is good if you are precisely aligned with the receiver ...
I am thinking about getting a tripod for my MDA so I can line it up with my TV or maybe attach a laser sight to the MDA ;-) (just kidding)
Really, i find it almost impossible to line it up from across the room. Otherwise, it works great
I find hitting the button and then blowing hard towards my tv helps the beam get there. :wink:
knowsleyroader said:
I find hitting the button and then blowing hard towards my tv helps the beam get there. :wink:
Click to expand...
Click to collapse
lol :lol:
works nicely for me...
tv respsonds better if you hold the button down on the screen..
it worked for me, and the TV in the bedroom....however i got about 1.5m range from it...so I may as well change chanels by hand...
nice app though.
I am getting a good 5+ meters no problems. I might have to by this, just a real shame you cant use custom graphics.
it won't let me open the program as I have already exceeded my 10 day trial ??
I did install a prev version but obviously that didn't work with the wizard
how do i reset my device so I can test this one for 10 days and check out what range I'll get
yea you have to be dead in line in order for it to work...but when it does work its PERFECT ...almost a replacement but...like i said the IR needs to be dead in line
hays said:
it won't let me open the program as I have already exceeded my 10 day trial ??
I did install a prev version but obviously that didn't work with the wizard
how do i reset my device so I can test this one for 10 days and check out what range I'll get
Click to expand...
Click to collapse
there is probalby a registry key stored for it....
be carefull with the registry though!
hays said:
it won't let me open the program as I have already exceeded my 10 day trial ??
I did install a prev version but obviously that didn't work with the wizard
how do i reset my device so I can test this one for 10 days and check out what range I'll get
Click to expand...
Click to collapse
Change the clock date/time
matheprat said:
hays said:
it won't let me open the program as I have already exceeded my 10 day trial ??
I did install a prev version but obviously that didn't work with the wizard
how do i reset my device so I can test this one for 10 days and check out what range I'll get
Click to expand...
Click to collapse
Change the clock date/time
Click to expand...
Click to collapse
Hard reset!!!
thanks for the replies
Changing the date didn't work and I'm definately not doing a hard reset just to see what this is like
I've emailed Novii, so I guess I will see what their service is like
Hays
hays said:
thanks for the replies
Changing the date didn't work and I'm definately not doing a hard reset just to see what this is like
I've emailed Novii, so I guess I will see what their service is like
Hays
Click to expand...
Click to collapse
Worked for me. Set it do the date when you first installed the program.
Does anyone know how to enter the reg. code? I can't find the right screen.

Cell Profiler

Has anyone heard or used this application and how did you find it:-
http://www.cell-profiler.de/
Thanks
Mark
mdavenport said:
Has anyone heard or used this application and how did you find it:-
http://www.cell-profiler.de/
Thanks
Mark
Click to expand...
Click to collapse
Wow, sorry I haven't used it, but it sounds fantastic!! I'll be interested in seeing what others think too.
Cheers Mark.
Steve.
I used a very similar thing on my old SPV C600 Smartphone and it was brilliant..
Feedback welcome...
mdavenport said:
Has anyone heard or used this application and how did you find it:-
http://www.cell-profiler.de/
Thanks
Mark
Click to expand...
Click to collapse
Read the reviews at Handango about it. Not usable on WM5.
jokinawa said:
Read the reviews at Handango about it. Not usable on WM5.
Click to expand...
Click to collapse
Does anyone know when a WM5 version of this will be released or if there is another program similar?
Try PhoneAlarm .. it has profiles .. but donno if it can switch them dynamically based on the location ...
Here is a link to another version but it says its not fully compatible with all PDA's. Anyone used it on a PDA?
http://maniac.fschreiner.de/index.php?option=com_content&task=view&id=9&Itemid=18
Thanks
cell-profiler is pretty poor imo, the full version of phonealarm does let you switch profiles based on cell id. Ive been using it for weeks.....great app!!
Its the app i was looking for because i used to use Magic-Profiles pro on my P900 which did the same thing.
mrvanx said:
cell-profiler is pretty poor imo, the full version of phonealarm does let you switch profiles based on cell id. Ive been using it for weeks.....great app!!
Its the app i was looking for because i used to use Magic-Profiles pro on my P900 which did the same thing.
Click to expand...
Click to collapse
The thing I don't like about phonealarm is the look and feel, it looks like the home page is going to be really busy and I also used SPB Diary so would it clash with this?
Has anyone used PPCProfiles for switching on a scheduled basis? If so how did this compare to phonealarm?
Thanks
Mark

Overclock Capability

Hi,
I overclocked my Prophet about a week ago to 301MHz and have it seems to be very stable - i've had no freezing the whole time whilst browsing the web, send emails and watch streaming video via orb. I just wanted to know if anyone has been able to push the Prophet any further to get an idea about its overclock capability. I know the phone in most cases remains working if you clock it to high but my Tornado seems to have slowed down after I overclocked it too much and I don't want that to happen with this one aswell.
Thanks
The highest speed I can OC my prophet to stably is 286. The chips all behave slightly differently so one may clock higher than others...
cool thanks!!
I advise you not to overclock it that much. At least not in a regular basis. It is a good idea tu use the scalar mode. You can find that setting on BatteryStatus plugin.
someone can tell me the name of a overcloker ?
id proved 2 types of programs (turbotry,other) with no results.
anyone knows a cool program tooverclock a Prophet - qtek200 and WM5 ?
thanks a lot
Try Battery Status, I've been using this for a very long long time with many cool features other than overclocking......trust me and try it....http://forum.xda-developers.com/showthread.php?t=270751
Does anyone know if batterystatus is available for WM6.1 standard on tornado?
No idea! I'd check the website http://www.chi-tai.info/
thanks! i will check it out
for wm6.1
i could not see in the web site
which proggram can you advise to me for use wm6.1
Tornado Power Control for overclocking
amedar said:
i could not see in the web site
which proggram can you advise to me for use wm6.1
Click to expand...
Click to collapse
Hi,
The program your looking for is omapclock, however this only temporarily overclocks the cpu. To overclock over a longer period of time you will need tornado power control (which comes with omapclock) - I have attached a file
Let me know how you get along!
amedar said:
i could not see in the web site
which proggram can you advise to me for use wm6.1
Click to expand...
Click to collapse
Alternatively, you can use "Battery Status" from http://www.chi-tai.info/
l3v5y said:
Alternatively, you can use "Battery Status" from http://www.chi-tai.info/
Click to expand...
Click to collapse
+1
works perfectly fine with cloudyfa's latest rom
ShadowVlican said:
+1
works perfectly fine with cloudyfa's latest rom
Click to expand...
Click to collapse
It works well on almost any ROM and device, although the overclock is limited to OMAP850 devices...
l3v5y said:
Alternatively, you can use "Battery Status" from http://www.chi-tai.info/
Click to expand...
Click to collapse
thank you
regards
the wm5.0 version works perfectly for me!
thread closed after request by thread starter.

Speedbooster made my Blackstone mucho-faster

Hi, for my first post, I want to share a application that i found on another forum, the application called "speedboster v2" and it made my GPS navigation much much faster then ever on my blackstone.
i have the iGO8.
http://www.teksoftco.com/index.php?section=speedbooster#practices
try this.
I would like to post the benchmark results maybe we can do a comparison.
which rom do you have on your blackstone?
i tested this software but i didn't notice real improvement
can anyone confirm this with the new stock rom??
thx
Everyone here says to get rid of this asap:
http://forum.xda-developers.com/showthread.php?t=501850&highlight=speedbooster
Svegetto said:
Everyone here says to get rid of this asap:
http://forum.xda-developers.com/showthread.php?t=501850&highlight=speedbooster
Click to expand...
Click to collapse
this a new version and if for somebody works....let it be.
it might depend on the ROM. all i know is that for me, after applying some tweaking the result was far for what i can call an improvement.
anyway, curios to see a benchmark "before" and "after".
p.s. why open a new thread? this is the third!!! search and post not the other way around.
I have OS 5.2.21042.
Huck33, that's strange, for me it works almost out of the box:
It's easy to see the speed gain, for ex. try to give max priority to fexplore.exe then enter windows folder.
Svegetto said:
Everyone here says to get rid of this asap:
http://forum.xda-developers.com/showthread.php?t=501850&highlight=speedbooster
Click to expand...
Click to collapse
Hm, I think that thread goes around a big confusion.

Categories

Resources