Forgive me if this has afterall been asked before, copious use of the search function has returned nothing of any use or in most cases, any relation.
I've recently aquired an O2 XDA IIs, unlocked, and I'm using it with my T-Mobile sim card. I'm trying to access the internet via the WiFi connection, but every time I attempt to connect (for example with MSN Messenger) it tries to connect via GPRS. I've tried making a new connection in settings, or editing existing connections, and yet all I'm presented with to connect through are these:
Bluetooth Dialup Modem
Cellular Line
Cellular Line (GPRS)
Generic IrDA
Hayes Compatible on COM1:
^I don't see a "Wireless LAN" option there.
If anyone could shed some light on this, it would be -very- much appreciated. Thanks in advance.
~Syren
wi-fi has a setting of it's own in the connection manager which needs to be switched on before you can connect to anything.
You need to connect to your wi-fi network, then activate MSN Messenger etc
Related
Hey,
I'm using a Qtek 2020i which I believe is the same as a xdaIIi. I have a wireless network set up at home and have managed to connect to it with the built-in Wlan device in my Qtek but every time I try to connect to the internet or send/receive emails it tries to connect to gprs even though it shows wifi is connected.
I have read some of the other forum posts here and many of them say to check that my network card is set to connect to the internet however where it says 'my network card connects to' there is only a blank box after it - no option to choose work or internet??
Has anyone got any advice on how to resolve this issue.
Thanks in avdance.
system->Connections->Connections->advanced
and pick the connection of your cellphone isp as the connection for
programs which use internet access
that is already the case so it can't be that I'm afraid
I am having the same problem with my MDA Vario(KJam).
It tries to connect to GPRS even if i have wireless lan connected
anyone know how i can sort this
thanks
As noted in another post, simply creating a dummy gprs connection created a default conne tion instead of the telco gprs.
Hi
I apologise in advance because I'm sure my problem is simply solved but I;ve not used the XDa for a while and I'm back to square 1. I have tried searching for the anser but I think my question is just to basic.
My XDA2 is unlocked and I use a T-Mobile sim in it. The problem I have is with the TOMTOM. When i try to update traffic info on the fly I get a message saying modem hung up (or something similar). It works fine when connecting via the cradle and my PC.
Now I think this is because the XDA2 is trying to connect using the O2 settings when I am on the road.
So my question is how do enter and then I get the XDA2 to use the T-Mobile settings?
EDIT: Sorry forgot to say so far I have done the following:
Start
settings
connections
Add new modem connection
enrtered T-Mobile
selected cellular line (GPRS)
entered access point as general.t-mobile.uk
user name as user
password as wap
Ok and update
seems it is connecting after all. Problem is I have to connect via GPRS first then up date the traffic. It's not picking up the connection if I just update direct from TomTom
any ideas?
I don't think you can do much about that, cause the tomtom, must automatically try to establish the GPRS connection.. like Internet Explorer does, it automatically checks if you have GPRS or Wi-fi connection, if not connected for you automatically. after reading your post. it does not start your GPRS connection, have you look into the settings of the tomtom, to see if he has an option that you can let it connect through your GPRS automatically?
Hi,
I just purchased the htc 8125 from cingular at full retail WITHOUT a plan
for use on my trips to Hong Kong using my sim card from a Hong Kong
provider.
While in the USA I would like to use the 8125 to access the internet without
a sim card installed and without cingular service. Wifi does recognize available
networks but I cant open any web pages.
Can you please tell me how to configure the phone to do this. I believe it is
by default programmed to use cingular's access services but I want to configure it to work as a stand alone device similar to a laptop looking for wifi signals to connect to the web.
Please help! Thank you.
David
WiFi is not configured to be used with anything of cingular...WiFi is a standalone feature in the PDA...the reason that you couldn't see a web page could possibly mean that the network you connected to had a WEP encryption...u must connect to an open network in order for it to work...
try this
I have been having problems with my wifi too...the only way that I can get it to work is to say the wifi connects to 'work' and to say that programs connecting to the internet should connect using 'My Work Network'
Turn on your WiFi
Start->Settings->'Connections' tab->WiFi or Network Cards->tap the network you want to use->under 'connects to:' chose: 'Work'->next->next->finish->ok
Start->Settings->'Connections' tab-> Connections->'Advanced' tab->programs connecting to the internet should connect using: 'My Work Network'->ok
hope this will work for you and if anyone knows how I can get around having to change this every time I want to go from GPRS to WiFi I would be much appreciated.
Haha - I just found it...someone else just posted it
http://forum.xda-developers.com/showthread.php?p=1179478
I've tried most of the solutions/methods on this forum/net, but it just doesn't work!
I'm able to pair the device, start the PAN service and 'Intetnet Sharing' gets connected as well, PC gets an IP address, but I get no response when I ping or open a webpage.
On the phone end, I've tried with WM5, WM6, WM6.1 and even with WMWi iRouter. On the PC end, tried with 3 different XP/2003/Vista machines. I'm using BlueSoleil 6.2, but had no success with older or later versions either.
Internet Sharing over USB worked fine till my USB connector broke so BlueTooth/WiFi is my only option.
Can soneone help me out please?
if you want to teeth your gprs connection so your pc get internet that way
PAN is not the way to go
search for bluetooth AND modem
in the forums there are many guides how
it's setup
PAN is if you want your pda to get internet from your pc
Thanks for the reply. I tried Bluetooth DUN but it's too slow (115kbps) and keeps getting disconnected every 5 mins...
If Bluetooth PAN is for sharing PC net only, why then does it show up under 'Internet Sharing', and also shows the Cellular net option, as if it can connect the both, like it does for USB? If PAN isn't meant for sharing cell net, it shouldn't show the option, right?
I mean, it's not *impossible* right? We have a TCP/IP network established with all IPs properly assigned; only one device has net access; how hard or improbable can it be to share the net? There has to be a way! :|
Infact, even the inbuilt Help on Internet Sharing describes that cell net can be shared w/ the PC over bluetooth using 'Internet Sharing' and says nothing about connecting as a modem and the whole *99# thing. I was of the opinion that 'Internet Sharing' made that method obsolete...
- Disconnect everything
- Open internet sharing, select Bluetooth PAN, connect. IS should tell you "waiting for bluetooth connection".
- On the PC, connect to the PAN service on the phone. This must work, I've used it countless times.
If traffic doesn't go through, you probably have a proxy set on your device (happens with some network operators) that you need to disable for it to work.
^ That's exactly how I've been trying .. maybe it's because of BlueSoleil?
Which bluetooth stack are you using? I've been searching the local stores for a non-bluesoleil adapter but no luck so far
I'm using the Widcomm stack that came with my BT keyboard/mouse set. I think you can download it for free anyway...
kilrah said:
- Disconnect everything
- Open internet sharing, select Bluetooth PAN, connect. IS should tell you "waiting for bluetooth connection".
- On the PC, connect to the PAN service on the phone. This must work, I've used it countless times.
If traffic doesn't go through, you probably have a proxy set on your device (happens with some network operators) that you need to disable for it to work.
Click to expand...
Click to collapse
Hi Kilrah, could u provide some details about how to disable proxy on the device .
I can connect but no internet traffic on my laptop .I am using vodafone live gprs on xda orbit .Thanks
Reflashed my Jade from UK Orange to JADEMAN rom recently...
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
I am sure to be missing something but I can't spot what the problem is...
Any help appreciated.....
Phil
Noted in next thread!! 2 threads the same.
janeway said:
Noted in next thread!! 2 threads the same.
Click to expand...
Click to collapse
Use this link for further discussion:
http://forum.xda-developers.com/showthread.php?t=540319