Related
hi all, I am new to xda-developers, I have recently bought a Qtek 1010 device & upgraded its ROM into PPC2003 4.00.05 ENG Kitchen from yorch.net
I've notices that sometimes my device goes too slow for a few seconds then it returns to normal.
I've installed a task manager software (SuperTasks) that will monitor the CPU usage of the running processes. I have found that FILESYS.EXE is tha cause of slowness!! it takes up to 94% of my CPU time for 10 or 15 seconds!
This is very annoying, I've formatted my PPC & installed my regular programs, and still suffering from this problem!
Is is a ROM problem?? Please help, please!
Thank you all
FILESYS.EXE consumes 94% of my CPU time
I have the same on my O2 XDA II running WM2003. filesys.exe starts its action for example after I take the PDA out of the cradle. It takes 10-15 seconds full CPU and then it comes back to 0.
Not sure what is happening. Filesys.exe is for the file system (disk access). For example, if you kill it with Supertasks, you may find your device stalls completely. You cannot even do a warm or cold reset. The only thing to get back into business was to take out the battery of my XDA II!
There are also posts on Microsoft.com about memory leaks in filesys.exe. There seems to be an issue with accessing files that go accross the 32MB limit.
All in all typical Microsoft: Bugs all over the place and no patches available...
Micro$oft = BAD! 8)
yeah you are right! it seems to be memory leaks!
but I have done something which has reduced the longly effect of filesys.exe!
I usually leave my XDA turned on all the night, but on charger. I've noticed that this could give a good time for windows to DEFRAGMENT the main memory, cus i think that when filesys.exe takes up to 94% of CPU time, then its doing some defragmentation to the main memory, even if you have more than 20 MB of free space! :roll: :evil:
So I just leave it running all the night because this issue PLUS another issue which still I suffer from!!! when i suspend my XDA while its being on the charger, the sound completly goes off!! even when i got incoming calls & SMS message, I can't hear them at all!!!!!
Hope Micro$oft will fix all these bugs in their outcoming version of windows 2003 second edition
Dude, You're blaming Microsoft for all these problems when you've screwed about with your machine's ROM! Speaking from experience as an XDA2 owner, I have no problems with my machine at all, and it's running the original ROM and original Bluetooth stack.
Most of the people who seem to have problems are the ones who've modified their ROM, either with an official upgrade from another service provider (and another country!!), or with some cooked-up ROM from Yorch.
Stop blaming Microsoft when the problem may be your own! :roll:
Original ROMs?
well, I have a cooked ROM from yourch, but I don't think its the problem. We all know that Microsoft products are full of bugs! but also I am beleiving that using original ROMs will solve the problem, but I really donno from where can I find original ROMs for W2003 second edition? :roll:
Re: Original ROMs?
Filesys DOES defragment the filesystem on a regular interval.
..Chuck..
Filesys.exe
I notice that filesys.exe is also doing overtime after switching the XDA II on and after taking it out of the cradle. No idea what happens, but I have the feeling it is caching data (what doesn't make sense on a diskless system).
To sublimatica: have you tried to see what happens to your "standard machine" after installing SuperTasks?
yes its the defragmentation process, it occurs usually when the device is idle or when the device is turned on!it takes at least 90% of CPU time, and if it was running while a call is coming then u will miss that call before you get notified about it!!!! :?
I was just wondering, I did a permenant backup of my contacts & calendar on the ROM using the tool that comes up with the windows. But I've notice that everytime i soft rest my device, an annoying status bar comes up & saying SYNCHRONIZING YOUR CONTACTS and SYNCHRONIZING YOUR CALENDAR,, it takes about half minute & I can't do anything until it finishes!!!
If anyone knows how to get rid of this please tell me,, Am thinking to make hard reset :?
Backup on ROM
Just disable the backup using "Settings", "System", "Permanent Save". Make sure all check-boxes are clear.
On my XDA I had another problem: when you have a lot of contacts and tasks, you get an error message: "backup area is full". The only way to get rid of that was to stop sync-ing to ROM.
If you regularily dock your XDA, it is really not needed to do the extra backup on ROM. Your Outlook on your PC will be the backup.
After restoring your normal backup, you need to tell the restore process to replace all items on your device with the items on the computer and off you go...
It worked, thanks ahiemstra.... it was really annoying me, now its gone :lol:
I noticed something strange in my XDA I...!! when its docked & connected to the power supply, it goes faster than when it not! :? I donno, maybe its an issue to save battery at the cost of less CPU speed!
I have the same problem with filesys.exe and CPU usage (I have an I-Mate PDA2K). Anything new to solve this?
Thanks!
Mr B
Wow... this has been happening for this long? It's still happening with WM6.
I don't know.. ever since I got my brand new O2 Exec I've been getting less and less productive in work. The machine is indeed cool, but only when it works. I'm early adapter but it's been for the past month or so that I'm working for the machine instead of the machine working for me.
Memory leaks are out of this world. Memory is not freed up many times and I end up easily with 3mb of free ram even if no program is on. The battery life is terrible (to say the least) compared to my good old PDA2K (even with it's over 1yrs old battery! it blasts the Exec memory miles away)
Lately, the amount of lockups I am getting is simply unbearable. machine freezes.. sometimes the left soft button's caption (i.e "phone") graphics is seen like a small white box or something(as if all the letter go over each other) and then machine freezes. Something an alert comes up and then machine freezes. I can't trust the machine for business use, for games yes, but not for business.
Please note I don't have many programs running at all, no wisbar or cosmetic stuff like that., no SPB Plus and stuff like that. Just PocketInformant, PocketBreeze, phoneAlarm all of which are must have for me as well as some utils i relay on. I am wondering maybe my ROM is outdated, but I didn't see an update from O2 yet (I don't want to install NO_ID tool and flush other roms than OS own due to warrenty issues)
I have OS2 Exec with following ver:
ROM version: 1.13.82 WWE
ROM date: 11/30/05
Radio version: 1.04.02
Protocol version: 42.37.P8
ExtROM version: 1.13.188 WWE
Is there any Official update from O2 to any of these ?
Help is very much appreciated. That's before a 10kg hammer is blaster over the machine in an act of anger.. lol
MOBILER
Here are my suggestions:
1st Upgrade to the latest I-Mate Jasjar ROM. It is definitely faster than the shipped ROM from O2 and highly stable.
ROM version: 1.30.76 WWE
ROM date: 02/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: Delete and install only what you need.
2nd I use Oxios Memory which has 2 useful applications in it. Oxios Close apps and Oxios Hibernate. I learned about this here in one of the forums. It basically free up a substantial amount of unused memory. Here is a link: http://www.oxios.com/memory/
As far as battery is concerned. I don't have a problem with mine. I keep it plugged in every night to charge playing a lecture DVD while I sleep.
So far O2 has not released an update yet. The last official ROM they released, I believe you are already using it. Let us hope when they do release something it would have the complete Windows Mobile Update support for BT headsets and Push email.
cktlcmd said:
Here are my suggestions:
1st Upgrade to the latest I-Mate Jasjar ROM. It is definitely faster than the shipped ROM from O2 and highly stable.
ROM version: 1.30.76 WWE
ROM date: 02/20/06
Radio version: 1.09.00
Protocol version: 42.42.P8
ExtROM version: Delete and install only what you need.
2nd I use Oxios Memory which has 2 useful applications in it. Oxios Close apps and Oxios Hibernate. I learned about this here in one of the forums. It basically free up a substantial amount of unused memory. Here is a link: http://www.oxios.com/memory/
As far as battery is concerned. I don't have a problem with mine. I keep it plugged in every night to charge playing a lecture DVD while I sleep.
So far O2 has not released an update yet. The last official ROM they released, I believe you are already using it. Let us hope when they do release something it would have the complete Windows Mobile Update support for BT headsets and Push email.
Click to expand...
Click to collapse
Thanks man, I highly appreciate your detailed helpful response, but two issues :
1) As I said, I do not want to install the i-mate JJ ROM over the O2 one due to warrenty issues. So I think I would prefer to wait for the official O2 release thought I am starting to loose patience..
2) I also use the MagicButton app on my Exec. It seems very efficient at closing programs and switching tasks with minimal memory footprint. I'll look into the program you mentioned, but I doubt that's the problem. My machine has memory leaks because even when programs are all closed after several hours of use I can get down to 3mb free RAM.
Regards
MOBILER
Do you use the brilliant SBSH Ilauncher as this has very bad memory leaks being looked into at the moment
@mobiler,
we must have twins! I have mentioned similar problems with my Exec to those you discovered and when I reported them here people were unhappy and accused me of not knowing how to use a Exec properly!
You may want to look at the following:
1. Powersave does reduce battery drain but you may a slight delay to being alterted to incoming calls
2. Reformat your SD card if you use data files (eg music, ebooks etc) a lot. I found that MS Reader and Windows Media player were not happy with the use of Powersave - often I would get a systems crash after restarting the device. But after a reformat of the SD card the device was much more stable
3. You can get good quality spare batteries now for the Universal from www.mobilefun.co.uk
I had a few issues with PhoneAlarm, nice piece of software does exactly what I wanted as well, apart from I had some compatability issues.
Slowed the phone down alot and if my memory serves me correctly ( I have a few too many memory leaks of my own going on ) made the phone freeze a couple of times.
Tried the trial version of Pocket Informant ( had it as standard on an IPAQ HX4700 and quite liked it ) but that caused me a few problems.
I now keep things simple, using PocketZenPhone for switching profiles ( very nice and simple solution ). Use the O2 web site to keep track of number of txts sent and phone call allowance.
SPBGPRS monitor for the obvious monitoring of GPRS usage.
Using the standard contacts and calender ( does me ok but not as flexible )
And I have just started messing about with Wisbar, No problems as off yet.
Personally I have found all problems with the phone are linked to software incompatabilities.
I am still in warrenty with O2 but have updated to the latest ROM and radio and if for any reason it has to go back I will try and flash back but my way of thinking is that I should be allowed to change to any ROM image I want in the same way as load any software I want.
Dont know if that is of any help at all, just my views on trying the same software. Regardless of how good they are, they caused problems for me so now I dont use them and everything seems to be running ok.
I know this is anachistic but I am also annoyed by the occasional reboot and have discovered (shock horror) that having as few TSRs running (i.e. none) as possible much reduces this. I used to run magic button and I am convinced that this caused the occasional lockup. These days I only have vbar (2.2) installed and run it at times of need (i.e. I don't run it all the time) as well as using the memory item in the settings to kill programs.
Running the virgin corporate install o2 ROM with no TSRs. Using PIE and Netfront, and the built in outlook, together with a number of games, has meant that my xda is quite reliable. I am hoping that my 'once every 2-3 days reboot' will be gone once the new xda rom comes out :shock:
I can also recommend memmaid to occasionally clear our broken registry settings.
WM5 has been a painfull experience for the PDA manufacturers. If you think we are having a bad time you should read the stuff about the dell axim x50 upgrade on aximsite. I am hoping that WM5.1 will be a free install for universal users as this will make the os more robust.
On an optimistic note the chipset employed by the universal is well used and very reliable in many applications, the construction is robust, so IMHO it all comes down to software/firmware which we hope will improve.
I suppose that is what I was getting at.
Keep it simple.
Whether it is a stability problem with WM5 or just the third party software solutions I dont know.
But when I keep it simple, it works and works well.
I never mentioned battery life earlier, this weekend I went away with a full charge, granted I took another smaller phone with me but I did use it quite heavily ( playing Bejewelled, surfing the net and sending MMS ) and it was always on .
This morning it was on about 40% charged. Not too bad I thought compared to previous Windows Mobile phones I have had.
I use memmaid as well to do a bit of house keeping.
I was using spbPocketPlus mainly for its Task Handling, but thought I would give WisBar a shot. Having a proper close option to hand is very handy and should be included as a standard option in any version of Windows Mobile.
If I am not using a program I want it to be shut down properly. Like using a PC I only have the programs running that I am using.
FWIW, I am new to this device, but not to PPC, so I am familiar with minimize/close distinction. My orange SPV M5000 loses about .3MB per program invocation. I shut down programs using either the program's own Exit function (where it exists) or the Memory tab in the settings area. But the memory is slowly eroded. The worst culprit is Activesync to my laptop, that consumes around 5MB that never comes back. After a soft reset there is about 23MB free, this quickly drops to around 18, then steadily drops. Something in the OS is not releasing memory. I have to soft reset to get the memory back (which takes about 3 minutes).
I suppose that is what I was getting at.
Keep it simple.
Whether it is a stability problem with WM5 or just the third party software solutions I dont know.
But when I keep it simple, it works and works well.
I never mentioned battery life earlier, this weekend I went away with a full charge, granted I took another smaller phone with me but I did use it quite heavily ( playing Bejewelled, surfing the net and sending MMS ) and it was always on .
This morning it was on about 40% charged. Not too bad I thought compared to previous Windows Mobile phones I have had.
I use memmaid as well to do a bit of house keeping.
I was using spbPocketPlus mainly for its Task Handling, but thought I would give WisBar a shot. Having a proper close option to hand is very handy and should be included as a standard option in any version of Windows Mobile.
If I am not using a program I want it to be shut down properly. Like using a PC I only have the programs running that I am using.
Have you tried using the Exec in Corporate mode? It works fine for me
@ChristopherTD, I setup a dummy Activesync server and then set Activesync to manual and I have found this make my Exec more stable - perhaps it is because it does not lose as much RAM as before.
It is surprising that after 6/9 months of WM5 availability that we are still having instability problems with major/popular WM5 apps. I only use GSPMagic, Agenda Fusion, MS Reader and Opera. Only GSPMagic and AgendaFusion have been trouble-free.
WM5 was intended for programs to keep running. I know we like to hack our machines to death + sometimes the memory gets too full and you have to kill stuff. But sometimes if you keep MS stuff running, and don't kill it all the time with something like magic button, you find the system runs better.
I have activesync, contacts, outlook and PIE open all the time. I used to kill activesync all the time and I think this caused problems.
Normally my games have proper exit buttons, together with pRSSReader (totally excellent program). For the MS built in programs I tend to leave them running as the OS was designed for this.
Wow I think its pretty clear I ended up with a good unit afterall, either that or o2 really really messed up with your ROMS.
I have to charge my battery every night but thats to be expected with the usage I have. And im running Wisbar Lite, PhoneAlarm, PocketBreeze, and Wisbar Advance Desktop, all no worries, the only time I notice a distinct loss of memory is after player Warring Nations.
I feel for you guys, I think your summing it up that your working on your device as opposed to it working for you says it all.
Thanks for all the responses. You're all great guys!
Please see my responses below to all suggestions:
Darren_Bridgeland said:
Do you use the brilliant SBSH Ilauncher as this has very bad memory leaks being looked into at the moment
Click to expand...
Click to collapse
Thanks, but no. I don't use SBSH Ilauncher. I use MagicButton which has a minimum memory footprint
jah said:
@mobiler,
we must have twins! I have mentioned similar problems with my Exec to those you discovered and when I reported them here people were unhappy and accused me of not knowing how to use a Exec properly!
You may want to look at the following:
1. Powersave does reduce battery drain but you may a slight delay to being alterted to incoming calls
2. Reformat your SD card if you use data files (eg music, ebooks etc) a lot. I found that MS Reader and Windows Media player were not happy with the use of Powersave - often I would get a systems crash after restarting the device. But after a reformat of the SD card the device was much more stable
3. You can get good quality spare batteries now for the Universal from www.mobilefun.co.uk
Click to expand...
Click to collapse
Thanks, I felt I was the only one having problems Anyway:
1) I am always in powersave, still loosing battery power.
2) I just purchased a new SD card yesterday because I thought that may have caused the problems, but it's not it.. same problems.
3) I'll look into spare batteries, thanks for the link
ninja12innotts said:
I had a few issues with PhoneAlarm, nice piece of software does exactly what I wanted as well, apart from I had some compatability issues.
Slowed the phone down alot and if my memory serves me correctly ( I have a few too many memory leaks of my own going on ) made the phone freeze a couple of times.
Tried the trial version of Pocket Informant ( had it as standard on an IPAQ HX4700 and quite liked it ) but that caused me a few problems.
Click to expand...
Click to collapse
I appreciate the reply.
1) I've purchased and used phoneAlarm for about a year straight with my PDA2K and it never failed me any problems. I consider it a must have, and since it ran quite smoothly on my PDA2k I don't see why it should cause the Exec these issues. Further, I did remove it and still exeprienced the same issues, so that's not the problem either.
2) I've used PocketInfromant for 1.5 years now and no problem on my old PDA2K.
colonel said:
I know this is anachistic but I am also annoyed by the occasional reboot and have discovered (shock horror) that having as few TSRs running (i.e. none) as possible much reduces this. I used to run magic button and I am convinced that this caused the occasional lockup. These days I only have vbar (2.2) installed and run it at times of need (i.e. I don't run it all the time) as well as using the memory item in the settings to kill programs.
Click to expand...
Click to collapse
Thanks for the reply, I've been using MagicButton for almost as long as I can remember and it never failed me. It worked superb on my PDA2K. Further, I tried removing it for a few days to check how things would work without it. Same lockups, same memory leaks, same mediocre performance, unfortunately (or fortunately) this isn't the problem either.
weasel said:
Have you tried using the Exec in Corporate mode? It works fine for me
Click to expand...
Click to collapse
Sure I actually never ran my Exec in any other mode than the Corporate mode, so I never even experienced the other modes.
jah said:
@ChristopherTD, I setup a dummy Activesync server and then set Activesync to manual and I have found this make my Exec more stable - perhaps it is because it does not lose as much RAM as before.
Click to expand...
Click to collapse
Pitty, that's not the issue with my machine as I already did that trick 2 weeks ago.
I just ran memaid to see what running processes do I have and I see to be having the following ones. Note that I have no running programs in the background and no today plugins enabled whasoever, just VoiceCommand I guess is working in the background but that's it. It seems to me that the WM5 core doesn't freeup memory.
Here's what memaid reports
gwes.exe 5.26MB
device.exe 2.83MB
filesys.exe 2.41MB
cprog.exe 2.29MB
VoiceCmd.exe 1.81MB
shell32.exe 1.51MB
(smaller processes below
tmail.exe 275.57KB
services.exe 159.81KB
connmgr.exe 115.81KB
MemMaid.exe 27.90KB
psShutXP.exe 11.90KB
srvtrust.exe 7.90KB
Nk.exe 0 bytes
the most memory you can clear is about 26-29mbytes. The rest of the running processes need to be there. There is a good thread somewhere on what each process does, will post it if I come across it again.
29mb is disappointing considering there is 64mbyte memory, but thats the way WM5 works.
rgds
I've got a O2 XDA ii (himalaya) and im running wm2005 2.01.64
After a soft reset I have 31.x MB or RAM left, even if I dont run a single program or make a single phone call within say 6hours my RAM is at 21-24MB. This has nothing to do with not correctly closing programs but either a wm2005 leak or in my case a lot of the problem is being pointed at SBSH Ilauncher.
Well here is a comparison just done a soft reset started memaid and my results are in brackets after yours for the ones in common running :-
gwes.exe 5.26MB ( 4.6 MB )
device.exe 2.83MB ( 1.46 MB )
filesys.exe 2.41MB (1.82 MB )
cprog.exe 2.29MB ( 1.46 MB )
VoiceCmd.exe 1.81MB
shell32.exe 1.51MB ( 1.21 MB )
(smaller processes below
tmail.exe 275.57KB
services.exe 159.81KB ( 315.76 kb )
connmgr.exe 115.81KB ( 115.81 kb )
MemMaid.exe 27.90KB (23.0 kb )
psShutXP.exe 11.90KB
srvtrust.exe 7.90KB (7.9 kb )
Nk.exe 0 bytes ( 0kb )
also I have :-
Wisbaradv2.exe 787.71 kb
sddaemon.exe 67.9 kb
Pimhelper.exe 11.9 kb
Poutlook,exe 3.9 kb
( i have Wisbar, SPBdiary and pocketzenphone open )
going to have a look later tonight to see if anything changes.
ROM Ver. 1.30.76
Radio 1.09.00
ExtRom ver 1.30.164
I had similar problems when I first bought my O2 exec (on Ebay).
I downloaded the latest update from O2 website and re-flash the phone. I used Corporate install. So far it has been solid and I am even using the phone with Goodlink without a problem.
About the same time I bought the phone, I bought a 2G SD card (sandisk) , when I got the card I insalled a few software on this card (TCMP and Total Commander). Everytime I ran those applications, I can see that the phone crawls like a snail and worse it hangs. It even take a long time for me to transfer files from my laptop to the SD card even when I used a SD Card reader.
I replaced the SD card with a 2G MMC+ (Kingston) and I install the same apps. My phone is working as it should be, I can say that I didnt experience any hanging at all and it was never slow as well. I can even upload a ripped DVD movie on the phone faster compared to when I used the SD card. Right now I have one full season of Alias in my MMC+ card.
I have the phone setup to turnoff after a period of time (3 minutes) when there is no activity as opposed to others that they wanted to have the settings uncheck Start>Settings>Power. I also make sure that the backlight is set to a minimun when on battery and I uncheck the part where the phone will not recieve all incoming beam.
So far, my phone has been stable and battery lasts for 3 days.
From personal experience I found wisbar caused issues with the phone not ringing on an incoming call. It would ring for the first call after a soft reset and then stop for any further calls...
The other major issue which could cause delays and slowness is installing to the sd card any apps which ought to be installed to ram. ie: today plugins etc.
hi everyone, i would like to know why the hell everytime i insert my SD card i lose about... 10MB of RAM? and when i remove it, they come back, this is really annoying, and no i don't have anything running @ startup from the storage card.
Thanks in advance everyone
I too have been experiencing a memory leak but didn't know whats causing it. Now that you mentioned this, i pulled out my Mini Sd and Ram to 15mb free, i plug it back in now there is 5.7mb free. I just hard reset this morning
What rom are you using? I'm on Summiter's customized 2.17 w/a2dp
and the apps installed on device mem is as follows:
Opera Browser
SPB Pocket +
Resco Explorer V5.40
Skype
Micro. Voice Command
and a bunch of reg edits.
Now i just got some error with "relprog.exe" and i sent the error report and now its down to 4.9MB free..
---------update-----------
I just soft reset and when it turned on it reported 10mb free, took out mini sd and now its at 18 free....
Nothing strange about that. It simply memory reserved for running the SD. card data, working space etc. It's the same thing on your PC. Though you might not notice it since you probably have about 2GB of RAM like me
like someone said i guess we are still beta testing this windblows mobile 5, and alabij, that makes sense but since i have a nokia 6630 too which is on a symbian platform and that does not happen, i really thought this was very strange
we are beta testing(and paying 500bucks)
for wm5
this things gonna happen
double post...
the problem is i don't remember this happening on my Jam(magician) sp3, sp3i or sp5... started recently(within this month) on my kjam(wizard) and i don't think its normal for a storage card to take 10mb of ram to be accessible. My device is basicly crippled with this BS! i can't run anything with 4mb of ram. I think i'm gonna hard reset next week and run my device barebone(nothing installed) and see if it does it just to prove taht 10mb ram is not needed to read a miniSD card.
I've had a lot of headaches over wm devices but this is by far the worst because for every other problem there is a solution. there may be a solution for this, but so far no ones reported one yet.
yes, no way should it take that much to run a memory card. i just tested mine and it takes less than a third of a megabyte. not sure if this helps, but i had a bad card which often brought my mda to its knees trying to cope with it and all its bad sectors. maybe try formating it or trying another.
so is it really just devilboy1488 and I that are experiencing this?
SOLVED
fone_fanatic said:
so is it really just devilboy1488 and I that are experiencing this?
Click to expand...
Click to collapse
i upgraded to Cingular Official AKU 2.2 ROM and this stopped happening
Thanks All
Normal load - card in - 13.7 free
Normal load - card out - 17.9 free
Using the newest summiter rom.
try using the official rom
Re: SOLVED
devilboy1488 said:
fone_fanatic said:
so is it really just devilboy1488 and I that are experiencing this?
Click to expand...
Click to collapse
i upgraded to Cingular Official AKU 2.2 ROM and this stopped happening
Thanks All
Click to expand...
Click to collapse
mine did not it uses 4/5 mb.
cinguler 2.2?
where did you get the Cingular Official AKU 2.2 ROM? I have the Cingular 1.8.11.1 right now, I got my phone off of ebay and it was unlocked. If I install the official Cingular ROM will it relock the phone?
What is a normal memory? I was running close to 20, before but I had to hard reset, and now I am down to 14-15. Is that OK? I am using the 2.17 rom, havent updated to the latest yet. It is so much hassle, to keep upgrading.
I'm running the 2.21 ROM and use a 512Mb miniSD. When I eject it my program RAM drops from 17.74Mb to 17.50Mb. It is consistant with every eject and insert. The storage RAM doesn't change at all.
i think i found the problem. Last night i reflashed my device with the official imate rom and after installing all my regular apps and all the reg edits, i was back to square one. From 21mb free to around 10mb after i insterted my memory card. so i undid a few reg edits such as increase font cache, glyph cache, and the 2 enhanced perfomance reg edits which increase storage manager cache sizes. So basicly all the cache increase reg edits were causing this, or so i noticed from my little test. Now i've got 21.95 free without card and 19.65 free with the card in which is a lot better than before
Just happened on my universal onn the third time
First time happened with WM5, then with WM6 for the second time
THe screen turns to fiull brightness and messages shown in the following screenshots are shown.
The only remedy is soft reset. This even happens sometimes with no apps installed
yeep, I have experience same, I got it same issue with some rom's after sending many many SMS. As I could observe it came from running low memory (even the display shows ca. 13-16 meg)
I had >26MB storage memory and >16MB of program memory
kdskamal said:
I had >26MB storage memory and >16MB of program memory
Click to expand...
Click to collapse
don't think it has anything to do with the storage memory but definitely with the program memory. By some of the ROM's it seams the 14-16 MB memory leading to your problems but some of the ROM's you can run down until 7MB and still no issue.
I use jwright's rom which as we all known as memory leak issues and it's been stable till there was only about 5mb left. after that i couldn't even open a photo (note: no crash or other odd behaviour, just out of memory), and that was when i soft booted.
Hello,
Being used HD for one week, I found one problem about memory consumption (not a problem actually ).
At startup, about 120M free memory, after using for one day (Opera, view picture, games, stock manager, etc), only about 80M RAM left.
I have tried to use
- oxios memory
- MemMaid 2.0
but it can only free 1-2M RAM, where is my RAM
Yes, I found out the same problem! Try to do a reset and the memory is cleaned again. I use the X button to kill all programs after using them, but it seems to be fludding on a regular basis, also activesync program keep popping up when I'm not connected, and the memory usage slowely gets higher every hour with a few procent.
Does anyone else has the same prob? Didn't use special appz yet, because it doesn't seem to disturb working with device.
greetz,
swa
Swantony001 said:
Yes, I found out the same problem! Try to do a reset and the memory is cleaned again. I use the X button to kill all programs after using them, but it seems to be fludding on a regular basis, also activesync program keep popping up when I'm not connected, and the memory usage slowely gets higher every hour with a few procent.
Click to expand...
Click to collapse
Until the phone starts having problems, why worry? With every new device there are threads like this with people obsessing over the amount of free RAM their devices show, but honestly you can just leave Windows Mobile to deal with the RAM itself and you'll never have a problem. There's no need to try and recover all the RAM that you think should be free. The OS will take care of it.
I have the same problem. My guess is it a memory leak in some apps. ITs no big deal, because there is lots of free memory and if it really bugs me, I can do a soft reset every now and then.
Yes, it is not a problem to me until now as there are plenty of RAM available!
I just curious about the kinds of program that consume the memory??
From my observation, WM OS is not doing the job of memory management well.
SiliconS said:
Until the phone starts having problems, why worry? With every new device there are threads like this with people obsessing over the amount of free RAM their devices show, but honestly you can just leave Windows Mobile to deal with the RAM itself and you'll never have a problem. There's no need to try and recover all the RAM that you think should be free. The OS will take care of it.
Click to expand...
Click to collapse
Clearing your browser cache will retrieve some of it
(unless you have it to cache to the storage card)
I don't bother too much with this as it does not seem to become a problem.
But, I don't "load and leave" applications. I also generally do a soft reset once a week.
However, in SK Tools there is a "FreeUP RAM" application as part of the suite. I just ran it and it recovered 2 mbytes (a bit less than 1 %)
@ Swantony001 :
Hi, there is a thead about stopping Active-Sync activating itself all the time.
Works perfectly for me.
See here :
http://forum.xda-developers.com/showthread.php?t=463013&highlight=active
Greetings,
go42
the memory leak does cause problems for me, well with tomtom7 it does. sometimes i get the message "not enough memory" unpon booting TT and am forced to do a soft reset.
its not often, but the fact it happens piddles me off!
Hi, guys!
I've noticed the same thing! Something consumes active memory!!!
I watched some processes... So "cprog.exe" and "device.exe" eat memory from time to time.
I use Soft Reset once a day or in two days.
If anyone gets a new WWE ROM with that bug being fixed, please, let me know .
Memory consumption is not a big problem now, but it's a bit annoying...
jonajuna said:
the memory leak does cause problems for me, well with tomtom7 it does. sometimes i get the message "not enough memory" unpon booting TT and am forced to do a soft reset.
its not often, but the fact it happens piddles me off!
Click to expand...
Click to collapse
Damn never experienced this problem before *touches wood*
Yeah i have experience the memory leaking up starting from 38% to 44% in a matter of hours.
No biggie, but if it comes down to problems like jonajuna experienced then, yes that is a problem.