Hi,
i am using a magician O2 mini..
The touchscreen for my pda seems to be damaged in the centre area as it fails to respond to taps there.. so i can never calibrate the screen..
there is no service nearby and i am trying to continue with the device tilli get a new one..
nowadays everytime i soft reset the set it loses it's calibration data..
and when i want to recalibrate the screen it just goes on and on .. neverending as i have read in other topics there is no solution for this problem...
i was wondering whether we could download and save the calibration data and just restore it next time there is a reset.. there is a program called "Remote Screen Alignment" from Code Factory (http://www.codefactory.es/downloads/mobile_speak_pocket/MSP_RemoteAlignment.zip)
this program is supposed to be able to copy the calibration data and store on our PC's so that we may recover it later..
i was wondering whether anyone owning a magician O2 XDA mini (PM10A) coud do the needful and upload the calibration file..
acc to their forum http://www.codefactory.es/msp_community/articles.asp?id=9
How do I retrieve the screen alignment information?
Connect the device to your computer and ensure that Active Sync recognizes your device.
Open the Remote Screen Alignment application on your computer.
Tab to the “Retrieve” button and press enter.
A file with the name “Calibration.dat” will be created in the same directory as the Remote Screen Alignment application.
You will need this file for automatically aligning the screen when you hard reset your device.
Click to expand...
Click to collapse
so i guess i need the calibration.dat for XDA mini PM10A
thanks guys...
I need also the file for automatically aligning XDA mini PM10A, anyone has XDA Mini working please install this program and send to us the calibration, also you can use it for future
note:
you can download program at: http://216.139.221.18/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
and all you have to do is: install and click RETRIEVE button and you have the calibration file.
All the best
Fidan
Hi Guys , Thanks for the tool for Alignment, i have XDA mini (JAM) and i want to send u the file "Calibrate.dat" but i don t find it...
can u tell me where i find it ?
As soon as i get this file i m gonna post it to you...
Thanks
hello
i have a qtek s100 with rom 1.12.05 PTB radio 1.12.10
just have donne the calibration and made the file you ask..
hope it can help you..
see ya
hi. just wondering, i have problem of have to align my screen many times. its just out sometimes every 2 hours - annoying...
will this file make the alignment permanent and solve my problem?
thanks
pretorianito said:
hello
i have a qtek s100 with rom 1.12.05 PTB radio 1.12.10
just have donne the calibration and made the file you ask..
hope it can help you..
see ya
Click to expand...
Click to collapse
how to use this file
Screen re-set prob
erwinsie said:
hi. just wondering, i have problem of have to align my screen many times. its just out sometimes every 2 hours - annoying...
will this file make the alignment permanent and solve my problem?
thanks
Click to expand...
Click to collapse
Hi
My cell also had the same problem. There is a bunch of wires coming from the back of touch screen, these wires fix inside a socket. There is a black color cover that fix the wires inside that socket. During mishandling that cover got loose, that's why your cell loose the screen setting. I fixed that cover and now my Jam works perfectly. (Do it if you have the courage to open your cell)
Ali
Screen Calibration Data for HX4700 needed.
Dear Folks,
can anyone please send me a calibration file for my hx4700 device so i can resore it using CodeFactory's procedure. Unfortunately my own alignement file got screwed up.
Help is greatly appreciated
mintaka
Alignment Data for Wm6.1
Please anyone here who can upload the alignment data for O2 Mini (W.M 6.1 by cotulla) using the code factory application since I accidentally damaged the digitizer of my unit. I tried the PM10a data which was posted in this thread, but it did not work. Please post it here. Thanks in advance.
Can anyone upload the calibration file for a HTC P3450 also known as ELF
Thank you
Calibration file Qtek s110
Hello,
i have a qtek s110 and i have problem on screen alignement.
I need the calibration data to skip the screen alignement with RSA.
Thank you in advance.
Peter3 said:
Can anyone upload the calibration file for a HTC P3450 also known as ELF
Thank you
Click to expand...
Click to collapse
It would be nice, because I need that too
Hi everyone,
I need data for ELF, too.
Thanks in advance. My mail is slavunbg at gmail.com
Hi everyone. Treo Pro (850) owners, please help me with Calibrationdata.
Thanks in advance. My mail is bor6491 at gmail.com
slavunbg said:
Hi everyone,
I need data for ELF, too.
Thanks in advance. My mail is slavunbg at gmail.com
Click to expand...
Click to collapse
HTC TOUCH ELF: (with a new digitizer)
1953,1877 3127,3230 3163,532 731,515 754,3205
Use it for good
need calibration for xda atom please guys
PM16A
vectra1234 said:
Please anyone here who can upload the alignment data for O2 Mini (W.M 6.1 by cotulla) using the code factory application since I accidentally damaged the digitizer of my unit. I tried the PM10a data which was posted in this thread, but it did not work. Please post it here. Thanks in advance.
Click to expand...
Click to collapse
From my o2 xda mini (PM16A(printed on the battery) - WM6.5) :
Edit:
It's PM10A, sorry
header2k said:
From my o2 xda mini (PM16A(printed on the battery) - WM6.5) :
Edit:
It's PM10A, sorry
Click to expand...
Click to collapse
How to instal this?
Calibration file treo pro
Hi everybody. Could anyone upload the calibration file for a palm treo pro?
I've got stuck on this. Thanks in advance. [email protected]
Calibration Data for Imate Jam
Hi all, I have an imate Jam running on win 2003 rom. I did a hard reset and am failing to calibrate, i manage to skip the welcome screen but the only problem am having now to the calibration. Does somebody have calibration data for imate Jam?
Thanks
Related
I have gotten a XDAII and have it setup and working, however the gprs only connects when needed and won't stay permantley on. Has anyone else found this to be true, or is there a way to make it stay connected?
you have an o2 XDA II or an Imate or a MDA II?
andygee said:
I have gotten a XDAII and have it setup and working, however the gprs only connects when needed and won't stay permantley on. Has anyone else found this to be true, or is there a way to make it stay connected?
Click to expand...
Click to collapse
I dont have any other known answer to that to fix it but there's a program on PocketGear.com called GPRS Keep Alive. $2.45 to buy it and there's a trial too so give it a try.
Her's the link incase you want it:
http://pocketgear.com/software_detail.asp?id=12673
But if you guys have alternate fix let us know, pls.
Here's a solution I've done to my XDA II with T-Mobile GPRS problem. I don't know who came up with this solution, but thanks to my friend who suggested this at PDAMobiz.com.
1. After a hardreset and completing the initial screen alignment, interrupt the auto-installation process by softreset your XDA II (you have 3 seconds before the files in Extended_ROM will automatically install).
2. Make your Extended_ROM viewable, whether by using the Extended ROM Viewer from http://www.ppcw.net or Extended ROM Switcher (sorry I forgot the link).
3. Now, install each cab files, except TMD_AP_NL.sa.CAB. In fact, I also disregarded, Caller ID, and some other TMD stuff.
As a result, the GPRS is now always-on as it should be.
Cheers,
Hi to the list,
i own a Qtek 9090.
It have just got a problem.
I cannot switch the Pda off by the switch.
It seems to be a problem with the switch but i think that the switch works because how i said befor it does not only switch off the pda.
if the Pda is already on and i switch it on with the bswitch it works.Also if i keep pressing the switch the light goes off and if i repeat the command the light comes on again so the problem is only for switch it off.
Actually to switch the Pda off i am using the SPB software but i cannot use it forever.
Anybody had the same problem?
Is there anybody which can suggest me how to solve the problem?
Thanks in advance.
Any help will be apreciated.
You're always welcome here but since you own a qtek9090 it's best that you repost your question on the BA forum. This is the Magician forum.
That seems like a software problem as the physical switch seems to work for other states. Have you tried hard reset to see if problem persists without any programs installed. Make sure you backup your data first.
To cruisin-thru
Hi,
i've made as you said.
I made and hard reset and tried without any software but still does'nt work.
Any other help will be apreciated.
Thanks
My O2 XDA Atom's touchscreen does not work on some spots and hence I am unable to align the screen after a hard reset. Yes, I did not backup the values before the hard reset . Can anyone send their atom's alignment values to me. They can be found at HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH in the calibration data key in the atom's registry.
I cant use the phone for anything but receiving calls right now. So any reply will be greatly appreciated.
2032, 2020 1130, 2938 1141, 1077 2947, 1101 2950, 2928
kropotov said:
2032, 2020 1130, 2938 1141, 1077 2947, 1101 2950, 2928
Click to expand...
Click to collapse
Hey! Thanks a lot. It worked. What a relief.
pls a onr for qtek s200
please i need the calibration data of qtek s200
thnks
I need callibration data for dopod d810,please sent to my PM.THANKS
I need calibration data for my HTC Touch 3G T3232
Hi,
I have a problem with my Tytn. When I press the WIFI Icon on the Comm Manager appears the Windows ball but the Icon is ticked, and I'm not able to switch on the WIFI module.
Has anyone had the same problem? Really is very annoying because this unit has less than month.
Things that i did without success were: Hard reset, Install WM 6.
I really don't know if can be a registry problem. I noticed that problem after install Hubdog software.
Thanks if somebody can help me.
Next step will be send the unit to the Service Technical Assistance.
Regards
Hi, welcome to XDA Developers. Please take notice of the search function. Meanwhile you can read these threads...
http://forum.xda-developers.com/showthread.php?t=304004
http://forum.xda-developers.com/showthread.php?t=299451
If you have the Touch or Kaiser Comm Manager please use a registry editor for the TyTN and check the following key:
\HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN\DeviceName
mine is:
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1
turning WLAN on/off in the Comm Manager is working for me.
Thanks for your comments.
Finally, I was not able to revieve the Wifi module and I sent my unit to the Technical Service.
I will upgrade with news if I hear something new and unknow.
Regards
JR_de said:
If you have the Touch or Kaiser Comm Manager please use a registry editor for the TyTN and check the following key:
\HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN\DeviceName
mine is:
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1
turning WLAN on/off in the Comm Manager is working for me.
Click to expand...
Click to collapse
Hi,
I have the same problem with the Wlan... I can't activate it...
As you ask, I check this Key, and I have the same ...
If someone has a solution...Thank you !
I upgraded my Jasjam with the original HTC Asia ROM (Doopod).
I too cannot switch on my WiFi anymore. Before the upgrade this was working perfectly.
Regards
Fellas, read the links I posted above.....there is a method there to determine which problem you have and some research on a possible solution...
hi... am looking for a good samaritan who can give a piece of advice for my XDA II mini WM6.1...
i am surfing on the net of my XDA when it shutdown i thought it was a battery problem so i try to charged it but i've noticed that it didn't opened for a couple of hours of charging. i tried to reset but it didn't work. so i decide to hard reset my phone but again it did'nt work, and now my XDA II mini WM 6.1 is totally dead.... i also tried to flash my phone but the activesync of my phone cant detect my PC, and even rebooting my phone also did'nt work.
is there anyone know how to fix my prob.?
pls help me....
you can also email me @ [email protected]
thanks and advance..