Hi to the list,
i own a Qtek 9090.
It have just got a problem.
I cannot switch the Pda off by the switch.
It seems to be a problem with the switch but i think that the switch works because how i said befor it does not only switch off the pda.
if the Pda is already on and i switch it on with the bswitch it works.Also if i keep pressing the switch the light goes off and if i repeat the command the light comes on again so the problem is only for switch it off.
Actually to switch the Pda off i am using the SPB software but i cannot use it forever.
Anybody had the same problem?
Is there anybody which can suggest me how to solve the problem?
Thanks in advance.
Any help will be apreciated.
You're always welcome here but since you own a qtek9090 it's best that you repost your question on the BA forum. This is the Magician forum.
That seems like a software problem as the physical switch seems to work for other states. Have you tried hard reset to see if problem persists without any programs installed. Make sure you backup your data first.
To cruisin-thru
Hi,
i've made as you said.
I made and hard reset and tried without any software but still does'nt work.
Any other help will be apreciated.
Thanks
Related
Hi,
I've just upgraded my O2 Xda II mini to the latest ROM (1.11) and found a problem.
Previously, I could end a GPRS session by tapping on the icon at the top and then clicking on the "Disconnect" button in the dialog bubble.
On the latest ROM, the "Disconnect" button has gone from the dialog bubble. It's simply not there any more.
I called the O2 Helpdesk and they have not had any other reports of this, and simply told me to hold the red "end call" button. While this works, it also backs me out of application I have open and active, which is a nuisance.
Does anyone else have this problem?
Yes you are right my MDA Compact came with the latest rom from factory and I was wondering why there is no disconnect button...? now I can see that it's common problem in 1.11 made by some mistake or something.
I guess they remove it because of the "GPRS connection problem" as I used to have problem on GPRS re-connection (after disconnected), however, after upgrade to 1.11, the problem no longer exist !
Thanks for your responses, Shamus and waiting4u.
I posted a message on the Mtek forum in Australia and one user there has the latest ROM and does not have this problem. Maybe it only happens to upgraded minis as opposed to new ones that came with 1.11?
Would really like this back. O2 support was no help and didn't even know it was a problem.
But this is obvious stupidy always on GPRS connection drains battery as a charm, I omitted the problem by installing SPB Gprs Monitor but disconnect shoud be implemented in system. M$ stupidy is enormous :evil:
PeterW mine MDA came with 1.11 it wasn't upgraded!!!
shamus said:
But this is obvious stupidy always on GPRS connection drains battery as a charm, I omitted the problem by installing SPB Gprs Monitor but disconnect shoud be implemented in system. M$ stupidy is enormous :evil:
PeterW mine MDA came with 1.11 it wasn't upgraded!!!
Click to expand...
Click to collapse
Hi Shamus,
In that case, it must be a stupid Microsoft oversight. I checked my colleague's Xda mini this morning - he is still running 1.03 ROM, and he does have the disconnect button. Very frustrating. :evil:
this little fine proggy finally makes me happy
http://www.gb-soft.cz/XDAII/product_gprs_tweak_en.htm
Thanks Shamus! Will give it a try.
PeterW said:
Thanks Shamus! Will give it a try.
Click to expand...
Click to collapse
Yes, it works well and gives me back the Disconnect button. Thanks again.
No problem
Hi,
I would like to know if anyone else has GPRS problems with the QTEK 9100 ? It hangs up as it wants (once every 10min, once every 24h) If it is connected and I want to sync, it doesn't work, I have to hang up in order to reconnect and sync.
Anyone knows something about this ?
Micman
I guess it depends on the operator. GPRS on my 9100 doesn't want to work with MTS. Megafon SIM card solves the issue.
Don't got that problem, got another problem. How do you disable the gprs connection easy ? any know can't find a way to do it easy.
Right now i need to go to /settings/connections/gprs and start changing the settings and push cancel to disable it.
Try this one: http://www.gb-soft.cz/XDAII/default.htm
Works very well for mine , even under WM5
Need answers , hit me ;-)
Micman
Moonsower said:
I guess it depends on the operator. GPRS on my 9100 doesn't want to work with MTS. Megafon SIM card solves the issue.
Click to expand...
Click to collapse
I have MTS but no problems :wink:
Thanks Micman. Workin great
q-biq said:
Don't got that problem, got another problem. How do you disable the gprs connection easy ? any know can't find a way to do it easy.
Right now i need to go to /settings/connections/gprs and start changing the settings and push cancel to disable it.
Click to expand...
Click to collapse
Just press and hold the red end key for more than 3 seconds and the GPRS-connection is terminated. I have even tried to install GB softtweak wich is able even i WM5.0 to bring the disconnect button to the gprs-bubble and it work.
Powershot-g2
Zamsky
I guess Tver's MTS GPRS differs from Moscow's. I heard they're testing EDGE here. This might be the cause. 9100 hangs on GPRS every time until reset or flight mode on/off.
Yes, the same situation...
In very random moments GPRS hangs ... I'm with Vivatel, Bulgaria...
Have you found solution ?
Micman said:
Try this one: http://www.gb-soft.cz/XDAII/default.htm
Works very well for mine , even under WM5
Click to expand...
Click to collapse
Nice utility thanks
Hi,
I have an IMate PPC (XDAII) with the factory installed Windows 2003, and service from AT&T (Cingular). Starting about a months ago, I've had to reboot my phone after a call in order to make another call or to receive one.
Before I try hard-reseting my phone or reflashing the roms, I want to find out whether anyone has an idea about whether the problem might be software, firmware, or hardware related. The phone works great, I just need to keep rebooting to keep it working. Thanks in advance for any advice on this.
I have exactly the same problem with my Orange SPV M1000. I've searched the forum very well. I could only find the same problem and no solutions.
Please help us!?
Hi,
Just got my Magician (Orange SPV M500) and unlocked it so I can use my Vodafone sim (using the software from this site). My problem is that if I leave my phone on for a while, for no apperent reason the Bluetooth turns itself off (disconnects - the Bluetooth icon in the bottom right of the screen is crossed out). I try and re-connect by clicking the Bluetooth icon, but there is no response. I've tried going into Settings>Connections>Bluetooth but there is no response when I click on that icon either. To rectify I have to do a soft reset. Anyone had similar problems before and known how to fix? Hard resetting doesn't solve the problem
Cheers
Try a bluetooth patch. There is one available for instance on the Extended Rom backup of QtekS100_WWE_11.11.129. Just try it.
I'm a bit of a novice at all of this. Can you explain how to do this? Is it safe or could I permanently **** up my phone?
It is just a patch wich originally shipped with the official roms. You can download extended rom copies on the ftp of xda-developers in the magician folder. Take the QtekS100_WWE_1.11.129 and in the zipped folder will be a BT patch.
Hi,
I'm a new user of SVP m3100. Quite happy with .
I just installed WM6 BM ,And works fine.
But I can not connect to O2 GPRS I tried to get the settings, use some .CAB that I found on this forum, change the details ... So many times. And still can not use it. Is that because I still have the Orange software on it? If so, how can I delete it? (so I'm not seeing the Orange logo everytime I switch on my device..)
Another question is about BT. I don't know if anything wrong on mine, or is all like this but, there is no way to , for example send a picture through BT ? I can not uset either to sync my device, so I'm always using USB.
Is that for any reason? Is the Hermes BT like this..? so what use has it, just connect with handsfree and GPS ?
Thanks for help, and sorry if that has been discused on the forum, but I couldn't find the information to sold it out.