i would like to use my xda2 as a regular wireless phone.
i thought it could be possible by putting an isdn-card into my pc and then connect to that pc via bluetooth.
however i have no idea how to do it or what software is needed.
could anyone help me with this please?
when the pda is connected to activesync over usb or bluetooth it have access to the same network as the pc
yes, i know, but i would like to know wich software i have to use to make it possible to use it as a regular phone.
Wait, let me get this straight:
You want to use your XDA2 and laptop to dial through the fixed phone line where XDA will act simply as wireless headset (like DECT phones)?
I don't think such software exists, the closest you can get is using Skype over WiFi or the PC internet connection (via ActiveSync).
Besides, can ISDN card even make voice calls? I think you need a good old fashion analog modem for that.
afaik there does exist a software for that for linux, but my pc is windows based.
and yes, isdn can make voise calls (search google for isdn cis).
for linux have a look at this post:
http://forum.xda-developers.com/viewtopic.php?t=8143&start=0&postdays=0&postorder=asc&highlight=isdn
Asterisk (http://www.asterisk.org/) works. You'll have to set up a linux box to run it on though.
and exactly that is my problem.
i only have a windows pc that i could use for that.
cant you just dualboot ?
or boot of a cd into linux heck recall linux distro's
back in the day which could fit on a floppy
You could run linux on a secondary inexpensive low spec box. Don't be afraid of linux, it's worth giving it a try
im not afraid of linux, but i have two pcs, one htpc and one to work with.
and since i do not want to reboot one of these to be able to use my telephone, i just cant install linux.
and since im still going to school, i dont have that much money to afford another pc.
so does nobody know of a windows solution for this problem?
Related
Hey all,
I have some generic BT dongle for my computer that I bought a year or so ago to use with my old HTC Typhoon. The dongle allowed my phone at the time to ActiveSync over BT using the BluSoleil software that came with the dongle. However, with the HTC Wizard (MDA vario body with the AKU 3.3), I cannot for the life of me sync over BT. I have no idea what I need to set up and every time I try and do a new "partnership" in the phone for syncing over BT - i select my computer in the devices, yet nothing happens. I cannot establish any COM port communication with the computer and the only type of services that i can push are the vCard from the computer and a "personal area network"...
HOWEVER, if I take my Wizard and connect it to my Thinkpad T60 laptop that has native BT; I can sync to my hearts content... so... someone please give me a clue as to wtf I am supposed to do here to get this to work over BT
Thanks!!!
Anyone? Plweeze?
C'mon, someone must have an idea!
Gave up
I had the same dongle, or at least mine also came with Blue Soleil. I hated that software - it runs a dozen different programs that clog the computer and still doesn't connect properly. I took it off and tried the native MS XP software. It would work once, but when I put the PC to sleep I would have to reboot to get it to connect again. I finally realized that it was much easier to use a cable and gave up. I'll try again when I get a PC with built-in bluetooth.
prestonmcafee said:
I had the same dongle, or at least mine also came with Blue Soleil. I hated that software - it runs a dozen different programs that clog the computer and still doesn't connect properly. I took it off and tried the native MS XP software. It would work once, but when I put the PC to sleep I would have to reboot to get it to connect again. I finally realized that it was much easier to use a cable and gave up. I'll try again when I get a PC with built-in bluetooth.
Click to expand...
Click to collapse
Where did you get the native XP software? I could never find the native software
Plug and Play
If you don't install software, XP will operate it.
My Trinity has VoIP available but nonetheless - as far as VoIP is concerned - I would like to just use it as a USB phone connected to my PC. It connects through USB so is it possible to use it as a VoIP handset?
I have already searched a bit on this topic, and have found that just using the ActiveSync connection won't do the trick since one cannot access the mic/speaker through USB, only data transfer as files or sync...
But I know of other client/server programs that do some telnet stuff over the connection, in order to transfer keystrokes, mouse and screen data. Would something similar be possible for what I have in mind? I just hope that the overhead or lag would not be too much. And I know for sure that other people would also like this feature
Anyone willing to give it a go, or know of an alternative?
This is a shot in the dark, but has anyone heard of anyone who got the mogul to work as an access point? Basically, use the evdo radio to connect to the internet, and use the wireless connection, either as an adhoc connection, or preferably as a full on access point with wpa2 to share to a laptop, other devices, etc. To better describe this, you can kind of do it with a laptop:
1. connect phone via ics or dun to laptop.
2. in windows, enable ics and create ah-hoc network with encryption.
3. Other laptop connects to windows laptop, gets wireless connection and is effectively using the phone as an access point.
Even better
1. Connect phone via dun to linux laptop.
2. Linux laptop (using madwifi driver or other open source) broadcasts access point settiings and works as a full on access point.
Scenario:
I want to be able to connect my mogul to my n800. I can do that now with DUN, but what if I want to use my bluetooth headphones, or the bluetooth keyboard that I haven't bought yet? Bluetooth only allows one connection at a time, so I'm SOL. If I could get my stupid mogul to work as an access point, then I could share my connection with any wireless device (how sick would that be) and reserve bluetooth for what I wanted to really do with it, not just browsing the net. Don't get me wrong, I love that I can even sync via bluetooth, but am just looking to expand the possibilties. Unfortunately, since this is WM6, I have no idea how to really work the SDK to see if network bridging is possible. If this were a Linux phone I'd probably be done already. =(
search for socks proxy.
it doesn't work that well, but it does work..
-mark
jtlonthewestside said:
Scenario:
I want to be able to connect my mogul to my n800. I can do that now with DUN, but what if I want to use my bluetooth headphones, or the bluetooth keyboard that I haven't bought yet? Bluetooth only allows one connection at a time, so I'm SOL. If I could get my stupid mogul to work as an access point, then I could share my connection with any wireless device (how sick would that be) and reserve bluetooth for what I wanted to really do with it, not just browsing the net. Don't get me wrong, I love that I can even sync via bluetooth, but am just looking to expand the possibilties. Unfortunately, since this is WM6, I have no idea how to really work the SDK to see if network bridging is possible. If this were a Linux phone I'd probably be done already. =(
Click to expand...
Click to collapse
Ummm... I'm not sure what you are basing your Bluetooth information on, but the BT specification allows for up to 8 concurrent connections at once- one master devices and 7 slaves. Why do you think its only one at a time?
I use multiple connections all the time- Very often I have my phone connected to my bluetooth GPS receiver in the car, and at the same time I'm playing tunes from the same phone over my A2DP compatible car stereo... or, take a phone call on my BT headset, and all the while I'm still connected to the GPS who is still tracking my location using bluetooth. I can tell the person where I am in real-time.
I've also had someone send me a file while talking on the phone via BT headset.
You don't need such a complicated solution for your imagined problem! I don't see any reason you can't tether it and still connect to up to 7 more Bluetooth devices at the same time!
Still, using it as an access point might prove useful for other sorts of scenarios (teleconnected mobile Lan parties? WiFi on a Bus? The incredible moving hotspot?), but you don't need it... at least not for your described scenario!
Basides, you'll get better battery life out of your connected devices if just using BT instead of WiFi!
I was wondering if this is possible. I've heard of people using ICS Control to turn it into a hotspot, but I no longer have a working WiFi card. I just got a new computer with Windows 7 and all I can do is use the built-in Internet Connection Sharing that comes with WinMo until I get a long ethernet cable to wire from my router to my room.
So I was wondering if it's possible to use the phone's ability to receive WiFi to share that connection with the computer. I'm sure there's some way for it to be done. Any suggestions?
I have the same question
same situation here.
After some searching, I've found a program called "Serialtunnel" and "wmtunnel" that is supposed to do just that, however I cannot find any working download link...
Let me know if you find anything.
http://www.wmwifirouter.com/
Will work as wifi to usb, making your phone a WIFI usb adapter. I use it with my desktop when hooked to my TV in the livingroom, rather than a 35 foot cord.
Its as simple as= plug in phone, start Wmwifirouter , touch wifi to usb button.
Battery charges while working so it doesn't kill it.
phone's ability to receive WiFi to share that connection with the computer can only be obtained if your phone allows to do so. check out the official site of your phone developrs. there will definitly be some considerations about this
Two solutions
Found two programs that do just this, both work on Windows Mobile (and unfortunately not on Symbian), but are supposed to do just what you're looking for.
ICS Control
Serial Tunnel
IF anyone figures out how to get this (converted) to run on a Symbian device... Thanks.
Anyone?
Bumping to re-ask question.
WIFI
i didt understand
ravichandrabr said:
i didt understand
Click to expand...
Click to collapse
I'm looking for a program that can "Wifi to USB" on a symbian (Nokia) phone.
In other words, I want to use my phone as a wireless adapter for an old pc without wifi.
would prob get more luck asking in a symbian forum
Tethering is the thing I miss most - and the reason I still carry my g1 with my laptop.
I have heard that htc sync offers connection shareing - but I use linux.
What does everyone else use? Hopefully there is one of you out there with a good linux solution
- faylix / local
-------------------------------------
Sent via the XDA Tapatalk App
I was using Proxoid with my BH2 with Ubuntu. It wasn't fun to set up, but it worked well.
On this note, anyone get Bluetooth DUN working on win7 via PDAnet?
faylix said:
What does everyone else use? Hopefully there is one of you out there with a good linux solution
Click to expand...
Click to collapse
I don't know if there's a solution for linux, but I had been using PdaNet with my G1 before I got the slide. I assume that it would still work. You should check it out in the market.
chadmd23 said:
I was using Proxoid with my BH2 with Ubuntu. It wasn't fun to set up, but it worked well.
On this note, anyone get Bluetooth DUN working on win7 via PDAnet?
Click to expand...
Click to collapse
same question here. i'm probably just confused with the setup tho =[
does the help
Straight from junefabrics the ppl that made pdanet
Bluetooth DUN does not require installing anything on the computer end. So it supports all operating systems. You can install the phone piece directly from Android market.
After enabling Bluetooth DUN in PdaNet, you need to pair your computer with the phone. Use the Bluetooth configuration software on the computer end to look for the Android pone and pair with its "Dial-up networking" service. After that your bluetooth software should create a new dialup network connection over the Bluetooth modem. Use "123" as the phone number and blank username/password.
Again make sure you connect using the Bluetooth software that comes with your computer. Do not use the PdaNet Desktop client which is only for USB connection.
Since different systems come with different Bluetooth configuration software, you can simply Google "Bluetooth Dun setup instructions on YOUR_COMPUTER_OS_NAME" if you need more help.
also it says on there that only dun works on linux but u will have to to website for that
easy tether??
Has anyone tried to use easy tether? it automatically sets up tether through usb not sure if it works haven't tested it.
darkfire2040 said:
Straight from junefabrics the ppl that made pdanet
Bluetooth DUN does not require installing anything on the computer end. So it supports all operating systems. You can install the phone piece directly from Android market.
After enabling Bluetooth DUN in PdaNet, you need to pair your computer with the phone. Use the Bluetooth configuration software on the computer end to look for the Android pone and pair with its "Dial-up networking" service. After that your bluetooth software should create a new dialup network connection over the Bluetooth modem. Use "123" as the phone number and blank username/password.
Again make sure you connect using the Bluetooth software that comes with your computer. Do not use the PdaNet Desktop client which is only for USB connection.
Since different systems come with different Bluetooth configuration software, you can simply Google "Bluetooth Dun setup instructions on YOUR_COMPUTER_OS_NAME" if you need more help.
also it says on there that only dun works on linux but u will have to to website for that
Click to expand...
Click to collapse
Saw this, but didn't work. Plus i think 123 is for Sprint, TMO is *99#, I think.
I have used both easytether and PDANet free version. They both work about the same. you install one app on the phone and hook up via usb to the computer and the computer downloads the drivers needed. very fast and easy setup and besides installing an app and plugging in usb cable you don't have to do anything. It worked great for me but it does require you connect via usb so would not be wireless by any means. I was connecting to a windows 7 computer.
figured out the bluetooth dun w/ pdanet.
if you've already tethered via usb, you should have 'PdaNet Modem' in your network connections.
right-click into its properties.
under the General tab & Connect using: , you should see the option 'Standard Modem over Bluetooth link #_'. make sure it is checked.
and the phone number is 123. username/password left blank.
apply all changes.
open pdanet on phone.
enable bluetooth dun.
it should pair the two.
connect to PdaNet Modem on computer
root has been achieved, may as well just root now
kingofyo1 said:
root has been achieved, may as well just root now
Click to expand...
Click to collapse
See my next thread =)