Sounds stopped working completly, i was using mp3`s and now even with everything up full i`m getting no sound, i`ve just had to do a complete reset, as i thought there may be something i`d overlooked so i decided to start afresh, still no joy though.
Anyone shed some light plz.. No reason it should be hardware as it`s not been dropped or anything
Thanks..
ok update
It works ok out of the headphone jack, so i guess the speaker is borked... still cant see why it would be though !
Hi. A friend of mine has the same problem. no sound on the headphones.
Have you already sort the problem?
Thank you
Related
There is no sound. I plugged in the head phones and i can hear out of that, but when i unplug it, i get no sound. It's like its still plugged in. Can anyone help me, or has anyone else experienced this?
sorry i have an o2 xda neo
Might be another instance of a known design issue with Prophet. Many people have hit this problem - mine did this and needed to be returned for repair.
Try putting the headphone jack in again and then out. Repeat like this for a while and your sound will come back on. If it doesn't, repeat faster.
This is a known issue where the sound disappears. Basically, a switch needs to be flipped for the prophet to know that the headset is out. Sometimes, this switch doesn't get flipped and the prophet thinks the headset is still connected, while actually its not.
If my solution sounds a bit crazy, it is...but its the only way and you don't need to send it in for repair. Search around and you'll find the same solution everywhere. People have also used a safety pin. But best is the headset jack itself.
How long mate? 2 hours? 3? I wish it had worked that way. I tried everything... still no sound. I think it is a crappy hardware. I think HTC should collect all prophets... I mean if it were a decent company.
Its just a little lower quality hardware, I agree.
If that doesn't work, try soft resetting. If that doesn't work, try hard resetting.
Its better to try all options before sending it in to the service centre, where it'll get screwed around and probably be kept for 2 weeks or something, due to "unavailability of parts"..
It is not working, removing and inserting again n again, some other method, i will have to try to open it, as it is not under waranty and it is also without bill, plz suggest me something
This seems to be a major problem with the HTC Prophet as a whole regardless of the branding. I have returned mine to Orange for a replacement, they confirmed that it was hardware failure. I thought that I might have just got unlucky with a bad batch, but looking across the NET and here, it appears that all brands based on the HTC Prophet are failing.
Obviously, shoddy manufacturing, I guess HTC did a little penny pinching with the speaker system.
I have same issue with my dopod 818 pro the plug and unplug trick did not work for me I have to send my to http://www.PocketPCTechs.com they have the device repaired for me now my device is back to business now..
I have the same problem here but i bit different... i was using an external speaker system, when i unplugged the jack from my spv m600 i did't get any sound the only sound i have is when i receive a call then i hear the ringtone but when i pick up i don't hear anything and probably the other side doesn't hear me...i tried to put the jack in and out but no results now i am obliged to use my phone with the headset...
same problem...solved!!
hi, today i had the same problem...no sound at all after i unplugged an external sound system. I plugged again the 2.5mm and unplugged it very fast a few times untill i got my sound back!!!
good luck
pixie
My m600 has been back to Orange for repairs for this problem. Works again perfect now.
Robin
PhoenixAG said:
Try putting the headphone jack in again and then out. Repeat like this for a while and your sound will come back on. If it doesn't, repeat faster.
This is a known issue where the sound disappears. Basically, a switch needs to be flipped for the prophet to know that the headset is out. Sometimes, this switch doesn't get flipped and the prophet thinks the headset is still connected, while actually its not.
If my solution sounds a bit crazy, it is...but its the only way and you don't need to send it in for repair. Search around and you'll find the same solution everywhere. People have also used a safety pin. But best is the headset jack itself.
Click to expand...
Click to collapse
I had the same problem today, googled, found this thread, followed your solution..... and it works fine again!
Thank you very much!
DrStein666 said:
I had the same problem today, googled, found this thread, followed your solution..... and it works fine again!
Thank you very much!
Click to expand...
Click to collapse
Does not always work.
It did not do the trick for me for sure. Orange had to repair it for me.
Robin
sound problem fixed by yourself
Hi all!
very easy! Just plug-in and plug-out hand-phone abit strong, it will get back!
lucky!
Thanks !
Worked for me !
Youpy
Hi there,
i'm stuck now with a very strange problem.
I was playing with the A2DP patch when i discovered that my prophet is making noise in the built in speaker when i'm receiveing or making calls.
After 2 hard resets (the Clean Data and the Camera/Comm buttons + reset methods), it's still the same. I can't use the phone as a phone!
Also same with headphones. It sounds like the volume is way too high. Almost unintelligible.
Only in Bluetooth it works correctly.
Any ideas?
It is a O2 XDA flashed with French QTEK S200 ROM, so of course waranty is gone
Help help help
Hi there.
Nobody had the same issue with his Prophet?
After some investigation, i came up with the idea that it was because i was using Wireless Stereo with an A2DP device, but it suddenly came back, and even with Bluetooth disables/devices deleted/unregistered from the phone, it's still the same.
I don't know what to do. I'm forced to use my Bluetooth headset to use my phone :?
I didn't try yet Hard Resetting my device, but the other day, when i wrote the previous post, it didn't help.
So, You, who are reading this, please give me some advices
I'm lost.
i have the problem in the other one, in the normal use the sound is sooooooo extrem loud. in the bluetooth mode works it perfekt.
nighty
Well, it depends how you see (hear) the issue.
I call this noise, but in fact it seems that the sound is pushed to the max. I can hardly understand the words people say to me through the built in speaker.
Maybe we have the same issue, but i call it "noise" and you say "extremely loud".
Do i understand well that you're living with this?
Did you also played with A2DP patch? Or is the origin of your issue different?
Personnally, i'd like to find a solution.
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Good,
i don't feel alone now
If one of them answers you, please let us know on this thread.
Maybe there are also other people with same or similar issue that are too shy to say it here
They'll like also to know how to fix.
I can't believe we're just 2 with this issue :roll:
Nightly,
did you have an answer for all the emails you've sent?
I'm planning to flash an O2 ROM back to the XDA Neo and sent it to repair, but if you've found the solution, i'd be happy to read it before i go to Germany.
nighty said:
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Click to expand...
Click to collapse
Hey, i was wondering did u ever find a solution for this problem as i have not 1 but 2 prophets with this problem thx
Something just happen to my Vario II, I dont have any ringtones (just vibrates), looks like the speaker in the back has gone dead. Any ideas/suggestions what to do, to fix it?
Phonecalls seem to work fine still, its just the speaker in the back gone silent.
Im really desperate, HELP!!!!
Mine has also just started doing this... any suggestions gratefully received...
OK - sorted...
Speaker connector had come loose. Check this thread...
http://forum.xda-developers.com/showthread.php?t=300805&highlight=sound
Hi!
I have a problem. Recently I 've installed new rom (touch-it 4.0)on my xperia. Everything was fine but when I plugged my phone to hi-fi, I started having problems.After i unplugged the phone the headphone icon was still on the display bar. I've tried to switch off the phone or even remove the battery but the problem still exist.I am not able to even make a call, without my headset, cause phone still acting like sth was plugged to the mini jack.
Please, do anybody know a solution to this case???
best regards,
Karol
Same...
I've got the same problem. I didn't install any Mod Roms, but Ive heard it could be a hardware problem. All the suggetions didn't work... like unplugg it when you just started a call...
My main problem is that it doesn't play any sounds anymore... Coreplayer says: "Wave Output: Device error!"
Maybe its because i've installed WOW-HD Sound app...
Shouldn't have done so... I guess..
But the headset problem still exists besides the sound prob, cause ive read a lot of stories about exactly this bug...
It's the same at my phone: The headset symbol doesn't disappear when you unplug your headset...
I think i got the worst case: My sound doesnt work so i even cant make calls with the headset... means, left for me is sms and Internet...
Thats why I bought a mobile phone
having thesame icon on my phone too cant hear nothing when receiving a call not ontill i slip in my headphone but my ringer works good thats the reason its amazing that i can hear my ring tone when am been called but cant hear nothing when accepting a call ,till i slip i my head phone,anyone got a solution? try let us know, thanks in advance
hi there
i have a Hermes, exactly the T-Mobile version..
anyway it worked fine till one day i got no sound at all, no mp3 no notifications, nothing....
except the boot up sound... checked the forums, seems it's a common problem, and i figured that the rear speaker works (since the boot up sound comes from it), the speaker cable is connected so i have no clue... if it would be broken, than the boot-up sound wouldn't come at all from the rear speaker, riight?
changed like 5-6 ROMs so far, from 6 to 6.5, no changes with sound...
any clue guys what to do?
I'd need to solve this asap...
thx for any solution
can please someone at least confirm me if my rear speaker is dead or not?
cos i hear the boot up sound from it but no other sounds...
please ,its urgent, thx
Well, the first thing that i would consider doing is backup my important data and do a hard reset....why don't you try that too....?
okay
got from ebay a new speaker... changed it and it doesnt work either...
hard reset and changing the ROM (6-7 of them) didn't help...
at beginning the sound could be heard at boot only while playing music, ringing and that stuff was mute... after 2 days the sound at boot disappeared too...
so, does anyone have a solution? when i plug the microUSB to 3.5mm adapter i can hear the sound on my earphones, but there is no sound when played normally on the ppc itself...
can anyone help me to solve this? where could be the problem?
thanks
okay...
going mad really... now i flashed an original AT&T US rom (although i have a tmobile EU) and guess what.... i hear the sound back again, but only at boot up... other sounds in winmo (ring, mp3, music, programs) are dead... can't hear anything although the volume is set at max...
so... i assume this can't be a hardware issue..
before this ATT i changed like 6 more different roms and all with same problems... now i have sound only at bootup... does anyone know where is the problem and a possible solution?
thanks
cmon guys... don't tell me no one has no idea what to do.....
i've been flashing and reflashing the roms but so far i can get only the boot up sound... any other sound is not available.. why? how to repair it?
thx
it's funny to see you can ask sometimes questions no one knows to answer
you've tried it by using the head set...?
whether the results were the same as well (no sound)..?
when using a headset (extUSB) there is sound and everything is normal...
Papcina said:
when using a headset (extUSB) there is sound and everything is normal...
Click to expand...
Click to collapse
you'd better check the speakers on your device , may be the connecting cable is damaged and if necessary you replace ....
I have the same problem here!!!Have you fixed that??Can you suggest me something, please???
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
nonsuchpro said:
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
Click to expand...
Click to collapse
you see in the WIKI, because there is described several ways to increase the BT A2DP sound quality and sound notification by Changing the Registry