Hi Guys, don't know if it's just my Atom but whenever i activate either Bluetooth or Wifi, there is no incoming ring when I receive a call.Is this normal? Shall appreciate your input.
Cheers,
I'm not sure if the problem is related but I occasionally lose sound when trying to make calls and the Bluetooth is on. The phone works fine when receiving calls. To fix it I will have to turn BT off. I wonder if the phone is picking up other BT devices around it and try to channel the sound to that device even when it's not suppose to??
Related
I use Tomtom frequently and use a bluetooth headset to handle my phonecalls. However when I use Tomtom, I want to hear the navigation instructions from the phone speaker and not from the headset. When I recieve or make a phonecall: vice versa.
I have come up whit a workaround solution. I use BTtoggle to turn bluetooth on while navigating if I receive a phonecall, takes some time and then anwser the phonecall through the bt headset. And then with alttab back to tomtom, so that I can see the route and calling at the same time. It's not perfect, but it does the job.
I want to have this done automatically by the phone. If I am navigating and a phonecall comes in, then the phone automatically turns on the BT, I answer the phone and tomtom remains on the screen. If i am done with the conversation, bluetooth turns off and i hear the voice from tomtom again through the phone speaker....
Does anybody know how this can be done? I have seen a Palm application which could do the trick...(by the way, it has got the same name as the bt toggle app: BTtoggle)...
Should be possible.. The only thing needed is a developer who's willing to put some effort into this.
you can use PocketZenPhone, its a profile switcher which is able to active bluetooth on incoming calls.
I am using it for years now.
I am going to look in to Pocket Zen, however do you have to change the profile manualy on incoming call or automatically?
Depending on your bluetooth headset, you can just turn it on and off. My headset has a switch, so when someone calls, I turn it on while its on my ear.
What about getting a Motorola headset with the boom that turns it on and off?
I just bought a bluetooth headset (SE DS220) which is working great - I listen to music and take/ring calls. However i have two strange issues I wonder if it is possible to fix:
1. While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
2. When I receive an incoming call I have to answer it with the button on the bluetooth unit - if I answer with the phone then the call is switched to the phones speakers. Is it possible to change this behaviour?
Thanks in advance!
/Hass
If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.
NetrunnerAT said:
If your Device switch to the Phone Speaker ... you havent connect the Headset Profil in the Blue Tooth config.
Click to expand...
Click to collapse
There is a tick in the box for the headset profile and the icon comes up in the status field. It only switches if I answer with the buttons on the phone.
Noone has any ideas? Hasn't anyone else this problem?
I am not sure, but why dont you just answer the call with the headset.
PseudoReal said:
I am not sure, but why dont you just answer the call with the headset.
Click to expand...
Click to collapse
That's what I do - my biggest issue is the first question:
While I am using the bluetooth headset my phone still rings if I receive an incoming call - I would like for the phone to be silent and for it to "ring" in my headset. If I turn off the sound in my phone then I can't listen to music either.
BT headset problems
I have an xda2 i and I have the problem that even when the headet is connected, at times an incoming call won't broadcast over the headset at all, and equally if i dial out the call doesn't transfer to the headset.
Curiously, I've found the solution is to go into bluetooth manager -->active connections--> and click on STATUS of the head set connected. it should show signal strength and such. I double click on the CONNECTED message (oor maybe somewhere on the screen, basically double tap until it reads NOT CONNECTED ..... as odd as it sounds... this is what i needed... as when I do this, it usually works ok for me.
Maybe it will help?
..........IB a n e
I have a jade working with a BT110 it answers the call fine but after the call the headset apears to turn off which it is supposed to do but the phone thinks that it is still connected so you have to turn soft reset the phone before you can make/recive a call and hear it via the handset.
has anyone else had this problem or could it possibly be the headset rather than the phone?
Tom
paperclip69 said:
I have a jade working with a BT110 it answers the call fine but after the call the headset apears to turn off which it is supposed to do but the phone thinks that it is still connected so you have to turn soft reset the phone before you can make/recive a call and hear it via the handset. has anyone else had this problem or could it possibly be the headset rather than the phone?
Tom
Click to expand...
Click to collapse
My experience - I use Jabra BT. The BT does not switch off after call is disconnected, until you switch it off. And the phone always thinks that BT is on (even when the BT set is switched off) until BT is disabled using the comm function.
I tried another Jabra headset last night, and although slightly better behaved it still didn't release the phone when turned off?
does anyone use a BT headset with the jade that works properly? what are peoples experiances.
anyone know what it is about the jade that makes it not work right?
Hi all,
Was wondering if there is a quick way to disable bluetooth or get the phone to not use the bluetooth connection when dialing out. I don't want to disable and then have to re-enable after the call. I want it to work similar to when you get an incoming call and use the answer key on the phone to answer it and the call stays with the unit and not routed to bluetooth ear piece but when you hang up, the bluetooth is still available for the next call. Hope that made sense.
Thanks,
Ho'okani
Hookani said:
Hi all,
Was wondering if there is a quick way to disable bluetooth or get the phone to not use the bluetooth connection when dialing out. I don't want to disable and then have to re-enable after the call. I want it to work similar to when you get an incoming call and use the answer key on the phone to answer it and the call stays with the unit and not routed to bluetooth ear piece but when you hang up, the bluetooth is still available for the next call. Hope that made sense.
Thanks,
Ho'okani
Click to expand...
Click to collapse
Hi Ho'okani,
Please try out this software as a (temporary) solution:
http://home.casema.nl/rgschmidt/WM/Downloads/BT Restart_V_1_1_0_PPC.ARMV4.CAB
This will automatically restart the bluetooth connection after ending a phonecall.
Hello.
I've a problem with Bluetooth call on my phone (stock rom) . All works great but since a couple of days I can't receive or make some calls with any Bluetooth device ( headset handfree, car audio etc). Media like music or icoyote (set in a2dp notification o media) works great.
I've reset all, car audio, phone. Nothing changed. I've installed spectrum mm rom, I've the same problem.
When I open Bluetooth device properties I can't activate the option for call and notification.
Do you have any idea for solve this problem?
Hello and up! Anyone have an idea to solve my problem? I've reset the phone 2 time and it works great for 2 week and now it don't work. I can't made a call with the Bluetooth
bluetooth doesnt open?can u send-receive files?
Hello. Bluetooth works. I can play audio like mp3 on hands-free and car audio. I can make phone calls on car audio but sounds of call don't go on car audio. On the phone I can't check made call on Bluetooth
I've tested the last spetrum's modem. All works great after each reboot but just one time.
When I enable the bt for the first time after rebooting it connect and call phone option was activated. When I enable it the second time it connect but call phone options was disable and if I tried to check it I can't.
the only issue that I have from the bigining..is that many times although b.t connects,it doesnt transfer sound to my plantronics M55 b.t headset.then I just turn off-on my headset,it reconnects automatically and sound is being transmited normally..
I solved the same problem with this thread
https://forums.lenovo.com/t5/Moto-X...less-bluetooth-headset-for-phone/td-p/3652038