I use Tomtom frequently and use a bluetooth headset to handle my phonecalls. However when I use Tomtom, I want to hear the navigation instructions from the phone speaker and not from the headset. When I recieve or make a phonecall: vice versa.
I have come up whit a workaround solution. I use BTtoggle to turn bluetooth on while navigating if I receive a phonecall, takes some time and then anwser the phonecall through the bt headset. And then with alttab back to tomtom, so that I can see the route and calling at the same time. It's not perfect, but it does the job.
I want to have this done automatically by the phone. If I am navigating and a phonecall comes in, then the phone automatically turns on the BT, I answer the phone and tomtom remains on the screen. If i am done with the conversation, bluetooth turns off and i hear the voice from tomtom again through the phone speaker....
Does anybody know how this can be done? I have seen a Palm application which could do the trick...(by the way, it has got the same name as the bt toggle app: BTtoggle)...
Should be possible.. The only thing needed is a developer who's willing to put some effort into this.
you can use PocketZenPhone, its a profile switcher which is able to active bluetooth on incoming calls.
I am using it for years now.
I am going to look in to Pocket Zen, however do you have to change the profile manualy on incoming call or automatically?
Depending on your bluetooth headset, you can just turn it on and off. My headset has a switch, so when someone calls, I turn it on while its on my ear.
What about getting a Motorola headset with the boom that turns it on and off?
Related
Hi, all.
Hope someone can assist me. I'm using an XDA II that has been upgraded to 2.06 Windows Mobile 2003 SE.
I have enabled the Bluetooth Headset profile on my Today screen and calls will transfer over to my headset (SonyEricsson HBH-65).
My question is for the following scenarios:
1) The calls transfer over but sometimes the connection becomes lost while I'm still mid-way in the call. How do I instruct the XDA to transfer the call to my Headset again? Tried pressing the button on my HBH-65 but the call doesn't transfer.
2) Sometimes, I put on my headset but forgot to turn it on. When a call comes in, I realise my mistake and answer the call on my phone first but then I ask the other party to wait while I turn on my HBH-65. After turning it on, how do I transfer the existing call to my headset?
Hope someone can help with some advice. Thanks in advance
1) I currently use BlueTrek G2 and so far has got no probs at all.
2) The BT headset has to be running before the phone in call. For the BT signal it has to be sent right b4 the phone in call.
I guess that's how you can get ur headset running.
I've got that to my best. Good luck...
No problem with them...
i am using BHB-65 too, they are great ,man, i have no problem with them from the first time using.
1. When you want to connect to the headset, there's an icon near the phone icon, you touch on that , it will indicate the term to transfer the call back the headset or cut it out.
2. When you forgot turning on the BT headset, just turn it on and press "enabled the headset" (on the desktop, remember to "view the profile" in item "Today"), it will automatically transfer the call to the BT headset.
Wish you could do that.
The idia is to use bluetooth headset (in my case HBH-600) with SE T630 and my Compact.
T630 pairs with headset only during incoming or outgoing call, in stand-by mode my headset is absolutly free to connect to my Compact.
And since my Compact connected to handsfree it's not letting it go. Even when my device is turned off headset remains connected to it. On the one hand it's good, but in order to make headset work with two devices I should get rid of that feature.
I've seen a thread where people (with feature mentioned above) said that our devices don't think that answering a call is "using" the device and turn off. So other party of conversation couldn't hear anything.
Do you have any ideas how to break bluetooth connection with headset after call?
Thanks in advance.
Perhaps Pocket Bluetooth Tools will help you, it can auto-off the BT on the device after the call is complete and re-enable it when a call comes in.
Be aware, however, that some people find it can cause more problems than it solves - I however love it on my Xda II.
Thanks for tip.
I've tried that a long time ago, but found it of no use for me at that moment.
I remember that there is "settings" for it, but now I can't find it.
And another question. On that site it is said that program supports bluetooth handsfree and headset profile, and what about voice dialing?
you also can use Pocket Zen Phone.. schedule your profile to set the bluetooth off at certain time.
Hi guys,
Remember there is "Automatic pickup" (see Phone/Tools/More)?
Well, try using it while having your Bt earpeace or hands-free kit...
No go? Have to press a button in order to get the chat?
That is exactly what's driving me crazy!
See if you can adapt automatic pickup for the earpeace too...
I tried - in vale..
Hmmm...
Do you mean where I can actually pick up a call when the phone is ringing?
I don't get the idea, can you be more specific. When my phone rings, I just simply hit the phone button on my Jabra 250V.
Auto pickup by Bt
Let me put it this way:
The auto pickup format is made for receiving a call without the need to press anything: after a few rings (you set their quantity) the phone is open for the conversation by itself.
Go to Phone / Tools / More and see for yourself!
The problem that if you use a Bt device you have to press a button in order to get the call, even if it's auto pickup.
Now, try doing that in surgery or while you have to pay attention to the road when driving..
Let's find a way to allow auto pickup through Bt as well!
i have a problem with this. i'm sitting at my pc, someone calls my phone automaticly answers and connects to my pc as hands-free. it does all this in like half a ring so i have no time to stop it. i have to pick up my phone take off handsfree and then i see who it is i'm talking to, and most of the time its people i'm avoiding. and its getting really annoying because my bt on my pc reaches my phone almost anywhere in the house i went to phone-tools-options-more and the auto answer feature is unselected. what do i do? also when i go to bluetooth devices on my jam there is no remove hands-free only set as handsfree.
-----------------------------------------------------------------------------------------
i fixed it, i just went to bluetooth services on my pc and unchecked start up automaticly on headset thingy.
thanks anyway
Hi All: I have paired the headset fine with my phone and made calls before but I can not switch a call from the handset to the headset while a call is already in progress. Once I end the call, I can pair the headset fine to make a NEW call but I'm having problems switching the call when it is already in progress. I can go to the phone and manually switch it to hands free but I thought that if I powered on the headset while a call was already in progress, that would route the conversation from the handset to the headset. Is that correct or can it not do this without some tweaking? Thanks.
I have the same setup and I can answer the call on the phone, then "open" the H700 and the phone re-directs the call thru the headset within about 2 seconds from opening the headset.
If I'm on the headset, I can press and hold the call button on the H700 and the call goes on hold. I can "close" the headset and then un-hold the phone using the touch screen and resume the call on the 8525.
Now I believe that the standard bluetooth stack is crap, and I have had many instances where the phone just stops linking the Bluetooth. I can usually restore the link just by using the comm manager to turn off the bluetooth radio, then turning it back On. I have even done this during a call and it worked.
I have always had solid, loud audio with the H700, BUT, several callers have mentioned that my voice was often clipping a word every few seconds. I don't know what that's all about.
Do you know whether you need to select any special settings or do anything special in the pairing setup with the phone or headset? I do not know how to have the conversation directed to the headset after turning it on when I am already on the call. It works fine to start a new call or to answer a call directly through the headset but can't join a call in progress. Would appreciate anyone's help. Thanks.
love this phone but don't know if i have a problem or i'm just using it wrong and i'm an idiot,
i use an o2 blue hands free bluetooth and when i get an incoming call it rings nicely in my ear and i press button on the o2 blue and answer the call and it all works beautifully.
however if i'm making the call, i dial the number on the phone press green phone button and the bluetooth doesn't kick in the call stays on the phone.
(you don't press anything on the bluetooth as it don't work that way)
is this a bug or is there a specific way to make a call on the handset so the bluetooth kicks in??
(apologises in advance if i'm missing the blindingly obvious)
Hi, Scottydog -- I've been using the P6500 with a Bluetooth headset (Plantronics Voyager 815) without any problems. Though to the extent that things don't work properly, I have the opposite problem: when I _make_ calls with the headset connected, all is fine; but when I _receive_ them, calls initially go to the handset and I then have to choose "Turn Hands-free On" from the right soft-key menu to get the call on my headset.
Have you tried doing this after you dial calls?
Wish I had something better to suggest!
Alan