Charging LED always red. Why? - 8125, K-JAM, P4300, MDA Vario General

Ok, my cousin's phone has a charging problem. the led stays on red. I know ive seen this problem on the forum not too long ago but i cant find it. so can anyone please direct me to that thread or solve the problem. thanks a lot!

Here's a thread with similar problem http://forum.xda-developers.com/viewtopic.php?t=52105
One of the main things is that to charge the phone you must use the standard mains charger (1 amp output) and not the usb charger or any other charger. Often the battery needs a kick start to get going and may need a while before it starts charging - so be patient. If it does not at all after this prob dead battery and you need a new one.

lsnizzle: please use useful topic titles in future.
Remember, Lithium batteries shouldn't be allowed to run to 0% charge really, for their best health.
<-- click here

Related

It's dead!

My battery went flat and I can't find my mains charger, so I connected it to my laptop using the usb cable, with the intention of recharging it. But it doesn't seem to be charging and I can't turn it on at all. Is that normal? Will it only recharge from a mains charger when the battery's dead? Finally, is it safe to by any odd charger off ebay etc.?
I do not know if that is normal or not. However with regards to charging, I have used a Motorola charger with USB connection successfully in the car and from the mains.
If it is all the way dead, you have to charge with original charger. USB charge will not work. Nor will a Motorola charger work. I think that as long as the charger is 5volts, you should be okay. My Motorola charger is like 3v or something.
Thanks
I had the same problem. It does not charge in the beginning, however, if you leave it connected to USB, it will start charging in an hour or so. damn long, but it's better than nothing...
Tried to keep it connected via usb for a few hours, no luck, guess I'll just have to wait till I've bought another mains charger. There seem to be plenty of cheaper ones on ebay etc., is it safe to buy any usb charger?
This happened to me, and I nearly had a heart-attack until I came to these forums for a solution. Apparently, the phone has to be on for the charger (mains or usb) to actually charge the phone. This is because the operating system of the phone controls the charging of the phone. If the battery is completely dead, the operating system cannot control the charging, and so no matter what kind of charger you use, and no matter how long you leave it plugged in, you won't be able to charge the battery.
The only way to get it to work is to get a bit of charge into the battery directly - not through the phone. In other words, you need to jump start the battery (almost like you would jump start a car's battery). What I did was take the battery to a phone repair shop, and asked them to boost the battery using boosting equipment. Their battery testing equipment will be able to tell you when there's sufficient charge to get it going. Then turn on the phone and plug in the charger immediately once it's booted up (in other words, when the operating system can kick in and start controlling the charging process).
Hope this helps.
PS, there's a post on this forum somewhere on how to do-it-yourself, but in the long run, I found my way to be the easier way.
PPS. Once your phone is back up and running, never let the battery run down completely.
Same happens to Motorola V3.
It is ridiculous design flaw.
This is really annoying, I was hoping to sort this out with a new charger (in the post now) but looks like I'm going to have to go to a t-mobile shop. Will they definitely have something to charge the battery a bit, or should I start looking into buying something to charge the battery at home?
Yes you need the main charger.
I was using my other phones charger(motorola) with my cingular 8125 and battery is completly empty it doesn't charge it.
Didn't wait for a hour but if that works.It's good i love my wizard
motorola V3 chargers do work. used the missus' when battery ws completely dead. interestingly, doesnt work the other way around...... :?:
help with my dead battery
Bdcol
Could you direct me to that post on how to charge a dead battery - I have searched but can't find it. This is a really annoying problem - does anyone know of a commercially available battery charger which doesn't need the phone OS (the battery looks pretty standard to me).
Many thanks
Chris

Help Wanted Got ablack screen !!!

Is there a wizard who can find a solution for my wizard !! I bought it one week ago now i have got black screen with no ability to turn the phone on and also no ability to soft or hard reset everything is dead and there s no battery charge ability. Any solution to slve it Please HELP ME !!!
Are you trying to charge the battery from the computers usb (or a 3'rd party usb wall adapter?) if so, this will not charge a completely dead battery. Try plugging it in to the usb wall charger that came with the device. This may help to charge the battery. Let me know if it works, or if you have any other questions....
You may need external charging
Charging of these batteries is controled by in-built circuit, so when it is discharged extremely low, it is very difficult to start charging.
Try leaving on charge for several hours or days and see if it starts charging. If it fails and you have no option to return it or buy replacement immediately, you may try to locate the polarity and use an external charger of same spec as reccommended for a few minutes and then continue charging in the wizard.
Someone did it here on the forum. You may want to search :roll:
Victor

Please help with battery problem...

Can someone help me figure out how to recharge my battery??? The other day my phone was working just fine... until it ran out of battery while i was at school. i kept trying to turn it back on and kept doing so until it was completely dead. Now the damn thing doesnt want to charge at all... i think i must have exhausted the battery completely that it cant keep a charge. It wont even turn on and wont even charge wen i plug it into the computer usb or through a wall charger. Can someone please help.
Are you using the original charger? has to have 1amp output to kickstart device. You have to leave it quite a while connected before the light comes on - up to 24hrs. If that fails use the boost battery trick - see thread here http://forum.xda-developers.com/viewtopic.php?t=58747
hmph....
all i have to say is damn t mobile... they cant expect people to never let their battery fully drain. its almost automatic for it to happen once in a while for people. why would they release batteries that cannot charge if its fully drained and expect people to search on the internet to find answers to solves these problems themselves... oh well thanks for the help guys. ill let the thing charge for a day or so n post my results... ps i dont have the original charger. im not at home right now n ill have to check if the charger i have is 1 amp or not.
YES!
the charger thing didnt work... but using the trick where splitting the usb and charging the battery manually worked! thanks for the help! much is appreciated!

HTC not charging, battery dead?

Helloes guys and goils.
I have a HTC wiz, and for a good few weeks now I have had problems with it.
First off, It would NOT charge through the Wall Socket OR USB, I let it run down over XMas and it's not been the same again.
It just will not charge or come on.
When I plug it into USB it looks as if it is charging, with the Orange light and The power bar turns to the socket looking thing, but when I leave it to charge it just goes off and doesnt come back on.
When I plug it into the wall socket the HTC does not respond.
I have been asking my mate in work to put it in his and charge it via HIS wall charger, which has worked a few times, but I seem to be getting a very awful run out of my battery.
I am thinking it is the phone and NOT the battery as i first thought, I dunno, im scared of throwing up £30 notes on a new battery only to find it is the phone.
What do you guys think I should do?
I heard somewhere that it is a SOFTWARE based charge and not a hardware based charge, what does that mean?
DO u think a flash would help it? I cant see it myself.
Or is my HTC just goosed?
Well
I can speak from experience when I tell you my wizard nuked 2 batteries...
how I dont know.
Hopefully one of the gurus can shed some light on your situation
(¯`·._.·[LaZaRuS]·._.·´¯) said:
. . .
I am thinking it is the phone and NOT the battery as i first thought, I dunno, im scared of throwing up £30 notes on a new battery only to find it is the phone. . .
Click to expand...
Click to collapse
If you do replace the battery, look on eBay - I got a new 1250 mA battery (there are also 1100 mA versions, don't get that) for $13.99US including shipping - works great!
Make sure its nothing simple... Try the USB cable plugged directly into the computer without using a USB hub (if you are) and different USB ports on the back of the computer. Also try different outlets for the AC adapter. If still nothing else I'd even ask for help from your local cell phone store (put on a sad face) and see if they'll lend you a power cord and or swap out batteries to see if they can reproduce the problem on a different Wizard, battery, etc.
There has been many posts on this subject with several different fixes.. i would suggest searching and reading and you can find your answers
My case
Hi,
I had somewhat similar problem with mine. My porblem was that I bought the Wizard with a Motorola charger. It had the same mini usb plug and when I plugged it to charge, the led on the wizard was orange and the Wizard indicated its charging, but the moment I unlugg it, the battery indicator was coming back to its previous state. My solution is to use the PC USB to charge it, on a couple of occasions I had the battery completely drained and had to "jump start it" by connecting the wires from the usb directly to the + and - of the battery. Even used once my good old AA Ni-MH charger to jump start the battery and it worked.
So perhaps you are not getting power from the cable, why not try with different charger or charging from another USB source (PC).
Hope this helps
Just happened to me tonight. Thought that my Wizard was toast as well.
I merely took the battery out for 10 minutes, put battery back in, and plugged device into original wall charger. All is well now.
-Jeff

Orange/Red Light

Hi,
Wondered if anyone can help me out. I have an XDA Mini S, not been used for a while but now I've tried to use it again and I cannot get it to charge. Sometimes orange light comes on and it looks like its charging but then light starts flashing orange or goes out, device won't stay on more than a few seconds. Also sometimes get red light flashing or constant, anyone seen this??
Thanks.
mrhaddock said:
Hi,
Wondered if anyone can help me out. I have an XDA Mini S, not been used for a while but now I've tried to use it again and I cannot get it to charge. Sometimes orange light comes on and it looks like its charging but then light starts flashing orange or goes out, device won't stay on more than a few seconds. Also sometimes get red light flashing or constant, anyone seen this??
Thanks.
Click to expand...
Click to collapse
battery is dead, get a new one...
It could be that the battery is too dead to get it to boot into windows. I've noticed on my G4 Qtek 9100 Wizard, that if i kill the battery all the way i cannot get it to charge what so ever.
It seems as if the charging circuit will not function unless the device is booted up. I can put the battery into a standalone charger to charge it up a bit, then put it into the Wizard and then it will charge the rest of the way after is has booted into windows.
I made a post previously about this, and got one reply which did not help, as a registry change has no function if the device cannot even turn on to begin with
http://forum.xda-developers.com/showthread.php?t=290370
d0ug said:
It could be that the battery is too dead to get it to boot into windows. I've noticed on my G4 Qtek 9100 Wizard, that if i kill the battery all the way i cannot get it to charge what so ever.
It seems as if the charging circuit will not function unless the device is booted up. I can put the battery into a standalone charger to charge it up a bit, then put it into the Wizard and then it will charge the rest of the way after is has booted into windows.
I made a post previously about this, and got one reply which did not help, as a registry change has no function if the device cannot even turn on to begin with
http://forum.xda-developers.com/showthread.php?t=290370
Click to expand...
Click to collapse
Are you plugging it in with the wall charger? If so maybe the battery is dead?
Doug: The Wizard can not be charged (except by the wall charger or some other method) unless the battery still has juice. It requires extra power to jump start the battery. This is documented in the manual and in lots of places on this board...
frazell said:
Are you plugging it in with the wall charger? If so maybe the battery is dead?
Doug: The Wizard can not be charged (except by the wall charger or some other method) unless the battery still has juice. It requires extra power to jump start the battery. This is documented in the manual and in lots of places on this board...
Click to expand...
Click to collapse
Thanks, I did not know this was an offically known thing. It's unusual from any other standard cell phone or PDA i have owned in the past.
With them I did not need to worry about the battery running down to 0. If it did, I could just plug the phone or PDA in and they would charge, after they had charged for 10min or so there would be enough charge to turn the device on. I perfer to run my battery down to 30-25% before charging again, due to the limit on charge cycles that Lithim-Ion batteries have. Although sometimes i just forget to charge it
Those charge cycles are the reason alot of people kill the capacity of their laptop/phone battery in a few months. They constantly plug and unplug from their AC adapter. Each plugin initiates another charge, even if its just a small top off charge.
Finally got a new battery and still no joy, when i plug charger into phone i get orange light as if its charging but after about 20 seconds the orange light starts flashing (not a missed call/message as phone has been flashed and no sim card in). Do you think the charging circuit could be broken?
hi,
don't know if this is of any use but heres video of problem.
thanks
mrhaddock said:
hi,
don't know if this is of any use but heres video of problem.
thanks
Click to expand...
Click to collapse
Interesting... hmm. Have you tried charging the battery(ies) in a different phone? (eg. a friend's, service provider's store?, etc?) Have you tried a different charger? USB-comp, wall, auto?
--M
Tried a few different chargers, usb cable and car, none of these work, unit worked with new battery but must have been charge present when battery first delivered. Incidently all chargers used do charge my xda orbit so i know they work.
mrhaddock said:
Tried a few different chargers, usb cable and car, none of these work, unit worked with new battery but must have been charge present when battery first delivered. Incidently all chargers used do charge my xda orbit so i know they work.
Click to expand...
Click to collapse
Warrantee service perhaps?
--M
Run out unfortunateley, probably not worth fixing.
mrhaddock said:
Run out unfortunateley, probably not worth fixing.
Click to expand...
Click to collapse
Bummer. Part it out?
--M

Categories

Resources