Database Users

Word Mobile "new file" open error

Hi y'all,
been tidying up my directories on the Xda mini (what a mess on the std install).
Since then I cannot open a new word document, comes back with "a problem with the document has been encountered and it cannot be opened"
I suspect I may have deleted a template file that Word uses when opening new doc's by mistake (maybe like the normal.dot in full blown word?)
Anyone know if this is the case, and if so what the file name would be?
Thanks
Paul.

You,ve probably deleted some templates in \my documents\templates on your device.
Find them all enclosed including a zoom fix for pocket excel - normal.xlt that gives excel 75% zoom if you use it as a template for your excel sheets.

next question....
Thanks Mark,
have downloaded the templates but Word is still not seeing them.
When I go "menu" - "options" the "defalt template" drop down is empty
Part of my original issue is the illogical structure of the directories on the device with what appears to be multiple instances of folders eg :\documents and setting\my documents as well as \my documents
Equally their are a number of "templates" folders around
Any suggestions on how I can alter where Word looks for the templates?
Paul.

The template that is like normal.dot is blank document.dot and if word is not seeing this you must of deleted something else. Are you sure you have placed the templates in the right place, so it should be on the device memory \my documents\templates\blank document.dot
If it is and still not working suggest you do a hard reset - but all is not lost if you don't want all the o2 extras that fill your device and slow it down once the hard reset is almost complete and the o2 stuff is just about to install do a quick soft reset and the extras wont be installed (be warned you have only 3 secs to do this)

Word Mobile templates
I cannot open this zip file which is suppose to contain template files for Word Mobile to work properly.
Attached Files
templates_434.zip (252.3 KB, 60 views)

I downloaded the zip and it opened just fine - what was the error you encountered? did you try unzip on pc and ppc.
If no joy - give me your email addy and i send them to you.

Word Mobile templates
I get an error from Winzip -- Cannot open file: It does not appear to be a valid archive. If you downloaded this file, try downloading it again." (I have, several times, and I tried opening the file instead of downloading it.)
Also, my issue is that WM6 Standard (smartphone) Word Mobile will not open Word files, but Excel Mobile and Power Point Mobile work fine.
I am running WM6 on a T-Mobile Dash.
The issue you discuss appears to be related to Pocket PCs, not Smartphones.
If you think they will help, please email the template files.
Ray
[email protected]

Re associate files to a certain program

Anyone know how to associate .txt & .doc files with Word?? Or associate a file type to a certain program??
I dont know what happened, some how they got disassociated with Pocket Word. But than a strange thing happened, I connected my 8125 to my PC and synced with it. I transferred a couple of .doc files over to it and somehow they got associated with Word :-/. I tried to do the same with .txt files but no luck.

Does anyone have any insight on this?

This really chaps my nipples as well.
On Pocket PC X-2003 you could go into file explorer and change file associations right there. Apparently now they don't give people the option by default. What happens when some shmuck program hijacks a filetype? When I saw this functionality missing on my Cingular 2125 Smartphone I wasn't too dissapointed, but it's rediculous that they took this off the PPC platform also.
I think you can still do this with various tweaking programs. Just make sure that they support WM 5 before even thinking about it. Not sure if you can find this in freeware or commercial. If you spot anything good that's freeware, please let us know.

RESCO Explorer can do it
Cheers
hrb

or you can have a look at the reg fr word, i have found powerpoint and excel, not sure where word is!!

I think gsfinder can do it, for free.
V

I couldn't find an option with GsFinder to associate apps...but i did one one with Resco Explorer.
Is there anway to change the icon to Pword for a file?? Its still the same as before, but it's working nonetheless. Thanx

GSFinder:
(Menu) - View > Options > File Types (tab)
V

How to Open PWI FIle on Windows XP

I have created on Note Containing some diagram in NOTES Application in Windows MObile 6.1
The file saved is of extension .pwi.
I want to open the file and copy the contents from it on to my Laptop.
Please Help..
Ashu

Just open it with Word..

Wouldn't life be easier...
It would be so nice if it were that simple... I have Word 2007. Do I have to install any plugin?
Thanks

when you open it with MS word,the system will warn you to download a new patch,then go on,IE will open the page of MS automatic, ok, guy, download the file ,you can open the File Format pwi
my ENGLISH is so poor,but i belive you konw what i mean....

didn't work right
I tried both openign this in office word 2007 in which I was promted to pick and encoder either ms-dos or windows 9default or other and non of those did anythign but show the .pwi as code not a drawing and office word 2007 did not ask for me to download said patch do you know were I can get the patch manually
I also tried opeing it with IE with no results please help

.Pwi
.Pwi In 2002
.docx In 2002
Allowing Microsoft office 2002 to open a document that is 2007 docx.
also pwi documents, & .Txt
*this convertor available from microsoft will hopefully allow you to open
.docx
.Pwi
.Txt
.and a few more i cant be asked to list...
in microsoft office 2002
Available from
http://www.microsoft.com/downloads/...70-3ae9-4aee-8f43-c6bb74cd1466&displayLang=en
**I personally use Office 2002, and it works fine, should also work seemlessley with office 2007

Casper the friendly ghost the friendlyiest ghost in town
If for any reason it doesnt work please feel free to contact me directly, as i have mine working absolutely fine and am now going to try and make 2007 do the same thing... I actually only do this so i can scribble up how to's and resolve compatability issues so if you have a problem Please bug me, if my one works so can yours!
*excuse the title but life behind a machiene gets a lil boring!

Can't open PWI files with Word 2007
I've got the same (or a similar) problem to others in this discussion. I've got lots of Note (PWI) files created on my XDA using Windows Mobile 2005. I want to open these with Word (or any other desktop application). I've only got Word 2007 running on Vista, which doesn't recognise these files. OneNote 2007 doesn't recognise them either. I can't believe it's a good idea to try to install a converter that was written for Word 2002 into Word 2007, as suggested here. I don't feel like taking this risk unless someone has actually done it and can say it works...
Surely there _must_ be a way of accessing these files on a Vista/Office 2007 PC?
Thanks - Rowan

how to open psi file in XP or Vista
Hey, try to use My Mobiler to open your .psi directly from your computer,
highlight the content of your whole file by selecting all,
copy n paste the text onto a new notepad.
There you are.
Above all, you need to download My Mobiler and install it. It's a freeware n has been around for quite sometime.
For details can refer to
http://www.pocketpcfreeware.com/en/index.php?soft=1866
or google for it.

Thanks for this idea. I've downloaded this package and it does work, as you say. But it's a very roundabout and tedious way of opening a PWI file that I have on my desktop PC. I've got to:
1. Connect my mobile up to my PC.
2. Copy the file from my PC to my mobile.
3. Open up the virtual window on my mobile using MyMobiler.
4. Open the document on my mobile, via the virtual window.
5. Select and copy the text.
6. Paste it into a document on my PC.
Why on earth can't there just be an import filter into Word 2007, or a notepad-like application that can open PWI files as text? Why, for that matter, can't I open them in OneNote 2007? Are Microsoft trying to punish me for moving to Office 2007 or something?
I know other people need to import "ink", but I hardly ever use this, so I'm just interested in text.
Thanks - Rowan

This is simple:
1. Open Word (2007)
2. look for the file pwi to open
3. open it!
If you do this just by clicking the file it won't work. Why? Because some knucklehead in Microsoft didn't think things through.

mikexmyers said:
This is simple:
1. Open Word (2007)
2. look for the file pwi to open
3. open it!
If you do this just by clicking the file it won't work. Why? Because some knucklehead in Microsoft didn't think things through.
Click to expand...
Click to collapse
THAT DOES NOT WORK!
Not opening in word by clicking it is simple and easy to fix. It's called file association.
But Word 2007 does not recognise the pwi file format. I've recently installed both office and the converters (which do say that they are for 2007 BTW).
(edit) OK - after that I got it to work.
You HAVE to have activesync installed on the machine you are trying to open it on.
It didn't work - I installed activesync - it still didn't work.
I connected the PDA - and copied over a pwi file to the PC. I could then double-click the file, and word did recognise the file format then.

g.turner said:
THAT DOES NOT WORK!
Not opening in word by clicking it is simple and easy to fix. It's called file association.
But Word 2007 does not recognise the pwi file format. I've recently installed both office and the converters (which do say that they are for 2007 BTW).
(edit) OK - after that I got it to work.
You HAVE to have activesync installed on the machine you are trying to open it on.
It didn't work - I installed activesync - it still didn't work.
I connected the PDA - and copied over a pwi file to the PC. I could then double-click the file, and word did recognise the file format then.
Click to expand...
Click to collapse
What can you do if you no longer own the PDA that made the .pwi files? I need a way to read these files...

mikexmyers said:
This is simple:
1. Open Word (2007)
2. look for the file pwi to open
3. open it!
If you do this just by clicking the file it won't work. Why? Because some knucklehead in Microsoft didn't think things through.
Click to expand...
Click to collapse
It does open but, if you are like me and use it for a mixture of diagrams and handwritten text (all 'ink') don't expect it to display as it does on your device.
Much better to open and simply take a screenshot(s) to import.
The Homer at MS ought to be required to use this for a month so he/she understands the p**s-poor conversion and how irritating it is

my note file from htc hd2 is all grabled(unreadable charachters. microsoft word open but asks to select encoding that makes document readable.. there's TONS and none of them can i read my notes? any help please. i'd like to be able to save my notes from phone to desktop and read them!
Thank you

It seems to work in OpenOffice.org Writer. I can open a .pwi file in Writer and then save it with same name and format. When I open the file on my phone it looks like the text is in another font but that's no big problem.
To sync the file via Windows Mobile Device Center (ActiveSync) I have to close OpenOffice completely.

I've searched internet during whole day for how to restore my notes from my X1 which is sold! Installed OpenOffice, Microsoft Office 2007 - nothing helped!
Nothing except one guy's little program from 4PDA.ru. This guy's name is Mike Sinkovsky, his post is here
I think he won't mind if I post his program here(sources can be obtained from the link above). Attached.
P.S.: If you have lot of pwi files, maybe the my bat-file will help you which contais this line: "PWORD.EXE %1 > %1.html". As you see you must run it and give your pwi file as a parameter to it, and it will make readable HTML file from it.
P.P.S.: Mike Sinkovsky, thank you again!

Could you explain how you're using this pword app? When I open it, I see a command screen flash up for a second then disappear. I don't see any way to use it.
Thanks!

1. Create a shortcut on desktop.
2. Open shortcut properties.
3. To the string which is specified in "Target" add name of your pwi file (assuming that it's situated in the same folder) + " > 1.html" (should look like "C:\pword.exe mynote.pwi > 1.html")
4. Press ok
5. Run the shortcut.
6. Check the newly created 1.html file in the same folder you have pword.exe

the program works like a charm, thanks! You saved me a lot of tedious copy&paste time..

[App] GSlide 0.7

Build your own sliding app today!
Check out the latest version, AND read the new API Docs. Its a piece of cake making your own slide app. All you need to know is basic MortScript!
---------------------------------
Go to http://www.gslide.mobi
* New cool screenshots and examples on the site!
I am moving the discussions to my GSlide Google group. For queries turn to
I feel i need to to start fresh somewhere I will keep this updated anyway of course.
http://groups.google.se/group/gslide
Last updated with:
0.7
- Many usability improvements. About time you might say, after all the backend stuff
- "Easy access" buttons on the top bar. Implemented using the Faces API of course
- Much improved RSS handeling
- Super easy adding of RSS channels
- Super easy adding/editing of GSlide Settings
- A lot of tweaks here and there
0.6.9
- Super cool update, as always
- Real RSS reader
- Configurable alpha effects for many objects
- Lots of other good under-the-hoddie stuff
0.6.7
- New really cool message overlay feature which is totally configurable. Right sweep the top bar for an example. Why not use it for a preview of images?
- A really cool new Face feature which makes it possible to capture clicks where ever they occur on the screen!
- Much improved code!
- Improved the text viewer so that it expands with text size.
- Ships with a fully functional XML parser in MortScript!
I really need to update the API! I have made many main script functions much easier to access. With all the new features you can really make any kind of app. Not just sliding lists! Because of the Faces feature you can load any image and just create a simple script which tells at which click-coordinates scripts shall run. Check out the onMessageClick.mscr file.
0.6.5
- GSlideAPI.Remote ready! To get things started i made a Wazzup feature where you can download news from the GSlide site.
- Made a nice text viewer sample for the Wazzup context.
- Made a LOT of bug fixes.
- Added a lot of new features for the API. Almost all Context properties are now possible to change at runtime through the super simple script API.
- With all new features your can really create just about any app using GSlide!
The Wazzup feature might need a change of settings. Try to open the context, if it says it cannot connect:
- go to the Settings context
- then to Remote
- then double click on Internet Connection and fill in the name of your internet connection. The default value is "Internet" which usually works.
0.6.3
- Click X/Y positions. You now get the users current X/Y position from the GSlideAPI. This means that you can calculate where the user clicked. If you dont get the point now dont worry, i will soon write about this in the API Ref. But its MAJOR feature!
- You can now have a real fullscreen with no bottom menu if you set <hideBottomPanel> to true in the Context.xml file
0.6
- Optional static top bar with dynamic message text and dynamic background (settopbartext, settopbarimage)
Events supported for the top bar are onClick, onDoubleClick, onSweepRight, onSweepLeft.
- More event handlers are now available through the api such as onApplicationStart and onApplicationExit.
- More very cool things coming soon.
0.5.6
- All new Oxygen skin with much more complete icon set (drawback is total size in kb)
- Communication with GSlide is now xmlrpc standard.
- More possibilities to make adhoc changes to events handlers (onApplicationStart, onApplicationExit, onTapAndHold, onBackTapAndHold, onClick, onDoubleClick, etc).
- Tap and hold support
- Renaming the menues is now possible.
- Right sweep now takes you to the actions (cut and paste etc) as default (really easy to change in the context.xml file. Look for the onSweepRight tag.).
0.5.2
- New "GSlide Settings" Context which makes it easy to set system paths according to your whishes. Switch to the new Settings context and click on the "Contexts" folder. When you click on the different settings here you can input new paths. Dont mess around with paths that look like this: GSlideAPI[paths]... unless you know what your doing.
- Working zip features again.
- A bit reworked skins.
- Uses the latest MortScript beta.
0.5
- GSlide can now read JSON! This means that you can load data from basically any data source, straight from the net.
This could be anything from RSS to stock information or mail accounts.
Contact me through my xda-developers GSlide page for more info until I finish the docs.
- You can now set shortcuts in GSlide to access files or folders in a snap. Super cool feature! Make new shortcuts by selecting any file or folder. Go to the Actions View by choosing "Show Actions". Here simply click on "Create Shortcut". You are now asked if you want to save it in the default location which is the GSlide specific folder used with the Right Sweep. Otherwise you can make a regular shortcut anywhere you wish by selecting a folder.
<-- Sweep = Back
Sweep = Shortcuts -->
0.4.9
Custom file/app icon support
You have to make your own icons though. I put a bunch of ok samples in the Default contexts new Icons folder. to make your own, simply name them with the associated extension (txt.gif or whatever). exe files and lnk files can also have associated icons such as PocketArtist.gif or Opera.gif (it does not need to be gif, any common bitmap format should work...)
0.4.8
New "lock list" function which secures execution of actions.
0.4.7
- New Actions with the same sliding interface as the rest of the app.
- New filter action. Now you can actually open the windows folder, IF you apply the filter first.
- Many fixes and patches.
- A lot better structure of folders and files.
- No need to specify the location of scripts in the context.xml files. (though its still possible).
* When an action is executed, GSlide will automatically redirect to the previous view. It just takes a moment *
0.4.5
- Easier install/config. Checks many more paths automatically.
- Awaited bug fixes
- Much improved Context handling (no restart needed).
- Better sweep functionality.
- Right sweep now opens folders as default.
- Much improved Scripting API.
- New Contexts for changing Volume and Backlight.
- 250 less KB
0.4
- Horizontal sweep support
- More detailed list behaiviour config, per context.
- Support for external, custom, event handlers for:
-- onSweepRight (default, "Open with ZNote")
-- onSweepLeft (default, "Back")
-- onDoubleClick (default, "Open with shell")
IMPORTANT INSTALL NOTE:
All the actions for list behaiviour is set in the context.xml file (GSlide/context/Default/context.xml is standard). The default paths to the MortScript.exe and the different scripts are /Program/GSlide/actions/....
This will probably have to be changed to your local WM5 file system path naming (/Program Files/GSlide/actions/ for UK/US).
To skip the custom actions for double clicks and sweeps and make GSlide operate as usual, just remove the lines:
<scriptEngine>/Program/GSlide/actions/MortScript.exe</scriptEngine>
<onSweepRight>/Program/GSlide/actions/onSweepRight.mscr</onSweepRight>
<onSweepLeft>/Program/GSlide/actions/onSweepLeft.mscr</onSweepLeft>
<onDoubleClick>/Program/GSlide/actions/onDoubleClick.mscr</onDoubleClick>
0.3.9
- I improved the list control with two new settings in the context.xml
<listMaxSpeed>15</listMaxSpeed>
<listMinReleaseSpeed>10</listMinReleaseSpeed>
The first tag sets the max speed when sweeping.
The second tells the list when it should start to scroll away. The higher the value the faster you have to sweep to get it scrolling.
0.3.8
- New and improved actions
0.3.7
- Since a guy had an strange incident with files getting deleted without any clear reason (i have no idea if GSlide was to blame but still...), i have added a bunch of security features:
-- Execution of GSlideAPI scripts will exit at once if GSlide.exe is not running.
-- Folders can not be deleted from the root of Windows. This means for example: \Windows\, \Programs\, \Storage Card\ etc
PLEASE DOWNLOAD THIS RELEASE, just to keep on the safe side.
0.3.6
-Included ZNotepad and a cool new light skin.
-Also added a Refresh directory action.
-Removed some bugs
Have fun sliding
Ciao,
Lars
PS.
GSlide have, at the moment, only QVGA skins... VGA is onthe way. you can of course easily make a new skin yourself if you can't wait
You might have to update the GSlideAPI.mscr file in the /actions/ folder with new system paths...

Hallo Lars. The application still crashes on /windows, photos and so on ! so ..what should i say.... nice but not usefull.

Hi,
please help me out by telling me the number of files in your Photos folder.
And when you say crash, is itan unhandled exception or a GSlide popup?
My best suggestion for large folders at the moment is to keep the row size/icon size small (approx 30x30). this consumes far less RAM.
Thanks for trying it out
I'll let you know if I come up with some other solution.
Ciao,
Lars

i get an unexpected error (think it was from wm6) and the application closes. in photos i have just five 3 mpix pictures. same when i try to open the windows folder.
i uninstalled it and can't tell you more.

thanks man... this is wonderful.
Gslide seems to be moving forward really well.
it'll certainly switch my resco explorer soon

Hmm... Let me see what i can do...
The windows folder is a "No-can-do" folder until i make a new less memory intense scrolling list.
Can you help me by downloading and trying more of the functionality and give me feedback.
On my device it works like a charm
Also tried it on a Qtek 2020i WM2003SE with CF2 and it worked fine.
Ciao

Dont forget to try out the scripting API!

Update 0.3.5.1
Fixed a new Action menu with more thumb-friendly function
Uploaded 16:00 GMT+1, only the GSlide.exe file has changed.
Ciao

the zip file seems empty ...
corrupted upload?
the programs looks promising

t0k0m0k0 said:
the zip file seems empty ...
corrupted upload?
the programs looks promising
Click to expand...
Click to collapse
empty here too...

No files in the zip folder. Would really like to try out this program.

Sorry! Uploaded from my HTC
Let me try again

Now!
The zip should work
Let me know if you have any problems.
Ciao

Please remember to update the paths in the /GSlide/actions/GSlideAPI.mscr file if you get unexpected behaiviour. The file is richly commented (to be written by me anyway ) and is easy to edit.
Ciao,
Lars
PS.
Dont forget to read the small, but growing, "GSlide Developers Guide" in the /actions/ folder

This is simply fantastic!! Thank you for developing another file browser
Requests:
1. Can you make the files seen pick up the associated icon? (obvious)
2. Please make the up directory button only require one tap, I like having to double tap to execute files but not to go up a directory.
3. I notice sometimes the list stops scrolling right to the end, may want to look into this.
4.Application needs a name, it only displays “\” as program name in running apps.
5. Have had an error once (I have NETCFv3.5 in the ROM):
Code:
GSlide.exe
ArgumentOutOfRangeException
ArgumentOutOfRangeException
An error message is available for this exception but cannot be displayed because these messages are optional and are not currently installed on this device. Please install ‘NETCFv35.Messages.EN.wm.cab’ for Windows Mobile 5.0 and above or ‘NETCFv35.Messages.EN.cab’ for other platforms. Restart the application to see the message.
at System.Collections.ArrayList.get_Item(Int32 index)
at Scroller.KList.MouseDown(MouseEventArgs e)
at Scroller.ScrollingPane.ScrollingPane_MouseDown(Object sender, MouseEventArgs e)
at System.Windows.Forms.Control.OnMouseDown(MouseEventArgs e)
at System.Windows.Forms.Control.WnProc(WM wm, Int32 wParam, Int32 lParam)
at System.Windows.Forms.ContainerControl.WnProc(WM wm, Int32 wParam, Int32 lParam)
at System.Windows.Forms.Form.WnProc(WM wm, Int32 wParam, Int32 lParam)
at System.Windows.Forms.Control._InternalWnProc(WM wm, Int32 wParam, Int32 lParam)
at Microsoft.AGL.Forms.EVL.EnterMainLoop(IntPtr hwnMain)
at System.Windows.Forms.Application.Run(Form fm)
at Scroller.Program.Main(String[] args)
Please keep up development

Hi
Thanks for trying out my little app!
Let me help you out a bit,
1. Can you make the files seen pick up the associated icon? (obvious)
- I have tried this, but i think i will place assoc. icons in the skin folders for now. I didnt get the windows icons to work properly.
2. Please make the up directory button only require one tap, I like having to double tap to execute files but not to go up a directory.
- Okidoki, I will make it optional
3. I notice sometimes the list stops scrolling right to the end, may want to look into this.
- This is actually my "Select-Zone" feature It is helps you to select items by keeping the list still. The width of this region is set in the context.xml file of each context.
4.Application needs a name, it only displays “\” as program name in running apps.
- Ahh... Fix it i will
5. Have had an error once (I have NETCFv3.5 in the ROM):
- I think i have fixed that problem now. Download the new exe
Ciao
Lars

mysparkle said:
3. I notice sometimes the list stops scrolling right to the end, may want to look into this.
- This is actually my "Select-Zone" feature It is helps you to select items by keeping the list still. The width of this region is set in the context.xml file of each context.
4.Application needs a name, it only displays “\” as program name in running apps.
- Ahh... Fix it i will
Click to expand...
Click to collapse
Looking better
3. What I meant is if the app is run from a shortcut it shows the WM top bar and covers up the up folder icon. It opens in full screen and doesn't appear to do this if you run it from a file explorer (kinda defeats the purpose), any ideas?
4. Still showing "\"
6. Are you able to make the action list scrollable with gestures so I don't have to push the tiny up or down arrows to move through the list?
Still heaps of potential!!

BEWARE!!!!!
Okay, i have NO Idea what just happened but I know i'm pretty pissed off.
I extracted the zip to try gslide out and i decided i'll stick to my previous program. when i tried to delete the folder, it deleted everything but two files. then i was trying to get dynamo 3.2.01 (previous version ran fine) and i went to check a registry key so dynamo would run and before i could go back to my total commander, mortscript came up with a message saying "Deleted!" thinking it deleted remaining files from the gslide folder, i dismissed it. but apparently something somehow deleted just about every file on my storage card! 5 gigs of music, morphgear roms, pictures, BACKUP files, EVERYTHING!!!!
I have no idea what caused this but I wanted to warn everyone that this happened to me and tto be careful. maybe be safe and if you need to delete the gsfolder, take your memory card out and do it from your PC
UPDATE: I believe it has to do something with mortscript. I am using the rom in my sig and it has mortscript cooked in and has a folder of mortscript commands and now it is empty! I'll make sure that chef knows

Nice applications
Trying it now
Hope will work
Thanks

richabi said:
Okay, i have NO Idea what just happened but I know i'm pretty pissed off.
I extracted the zip to try gslide out and i decided i'll stick to my previous program. when i tried to delete the folder, it deleted everything but two files. then i was trying to get dynamo 3.2.01 (previous version ran fine) and i went to check a registry key so dynamo would run and before i could go back to my total commander, mortscript came up with a message saying "Deleted!" thinking it deleted remaining files from the gslide folder, i dismissed it. but apparently something somehow deleted just about every file on my storage card! 5 gigs of music, morphgear roms, pictures, BACKUP files, EVERYTHING!!!!
I have no idea what caused this but I wanted to warn everyone that this happened to me and tto be careful. maybe be safe and if you need to delete the gsfolder, take your memory card out and do it from your PC
UPDATE: I believe it has to do something with mortscript. I am using the rom in my sig and it has mortscript cooked in and has a folder of mortscript commands and now it is empty! I'll make sure that chef knows
Click to expand...
Click to collapse
Scary! I am sorry to hear of your major mishap
I am just wondering what happened?!
GSlide is contained in its root folder without any connections to the outside world except through MortScript. And the MortScript.exe is located in the GSlide folder as well...
I just can not see how deleting the GSlide folder could trigger anything... And GSlide has no MortScript saying just "Deleted!" so the dialog was not from GSlide.
* How, with which app, did you delete the GSlide folder?
* Which two files where left in the GSlide folder after your first delete attempt?
NEW UPDATE:
Did you delete the GSlide folder from within the GSlide app? This could maybe screw up things, and could explain the two locked files as you are basically deleting GSlide in it's own running process... kind of asking it to implode.
This is just a theory of course and does not account for the loss of the other data.
Didn't get the rom/sig thing
Please get back to me asap with help.
Thanks,
Lars

Cant add programs to list

HI, i have seen on this WM6.5 that i can't add any program (ie one thats not say google maps or one of those big companies)
i can run the program via file manager and clicking the application .exe
the phone still wont see the application as a program.
i had a jasjam before and the prgrams i am trying to add worked fine but now on 6.5 cant do this.
the only way is to run these apps, well not run but to get a short cut, is on a program like CHome but then i move away from HTC sense start up display that is nicer looking.
like i said the programs work fine, just can see them in programs.
anything that will help?
cheers

have you posted a shortcut to your windows\start menu\programs\
I'm running 6.5 and any time I have a program installed on my sd card or trying to run an .exe from the storage card (or even if the .exe is just in another folder) thats what I do and it shows in my start menu or whatever subfolder I put it in in the start menu.

Aaron McCarthy said:
have you posted a shortcut to your windows\start menu\programs\
I'm running 6.5 and any time I have a program installed on my sd card or trying to run an .exe from the storage card (or even if the .exe is just in another folder) thats what I do and it shows in my start menu or whatever subfolder I put it in in the start menu.
Click to expand...
Click to collapse
Yeap, in programs folder as an .exe, other folders like goggle maps are there too. The programs still don't show or work. Should i not try and get an .cab version? since looking into this takes you into trying to understand a pda rather than a PC. The .exe files still cant be seen, i have to run them via file explorer, although now loaded a short cut via button strokes so am using that to make the task a little easier.
I ran a .cab file on another program and found it distributed files with icons and other th9ngs that seem to integrate better into the host rather than an .exe
Also been looking at all the apps these phones can have its amazing.
I have one on my phone that can change a set of traffic lights in my city!
With authorisation of course, its my job, just saying how the PDA has really started to take off. become the real modern Swiss army knife.