Hi There
I wonder if somone can help me.
I hav an Xda lli and I have just installed activesync that came with my phone.
When I plug my xda into the comp via usb it says connecting then comes up with a message saying
Critical communications have failed to start. Try reseting the mobile device then connect again.
I have reset it a few times and also reinstalled the software but I am still getting the same problem.
I really need to sycronise to keep all of my diary on the computer and it's giving me a real headache.
If anyone can help me I would be really greatful.
Best Wishes
Paul Dabek
http://www.google.dk/search?hl=da&q...to+start+activesync&btnG=Google-søgning&meta=
Related
hi to everyone,
i have a locked-SIM t-mobile phone edition which i tried to unlock using a serial cable & the manipulator.
the problem is that the manipulator can't find the device after scaning COM port.
i have checked that the port is not blocked by any program including the synchronization programs but there was no luck.
anybody knows what is the problem in my situation?
Be sure to press SIMULTANEOUSLY both power button AND reset with your stylus. This will bring your T-Mobile to WALLABY mode. After the screen reads GSM OK, connect the cable to your phone and PC and run manipulator.
This should work. I have the same T-Mobile and it worked with mine.
There have been posts with reports where people have had problems connecting to the pda because they have been using a laptop...
I unlocked mine on a SONY VAIO laptop successfully.
hi again,
i have tried the exact steps for unlocking but still the device wans't detected by the manipulator.
the synchronization program also can't detect the device if it is pluged using the serial cable.
could anyone please help me? i couldn't use the phone since 1 month.
Try 75656354
Wasn't there in any thread the hint to uninstall ActiveSync to get the manipulator to work?!?!
Search here in the forum. It wasn't posted as long time ago.
Or just try it when you uninstall.
I ment that there was a problem because active sync wants to connect to the XDA/MDA when connecting it to the serial....
Regards
LumpiStefan
Remember you must have the XDA in bootloader mode.
I have a Siemens SX56, locked to AT&T.
I downloaded the new 1.1 ROM, (Jeff's courtesy)
and began the upgrade.
It started, My SX56 said "Upgrading It will take about 5 minutes...."
Then,
I got an error message on my computer about com ports not being available, it lost the active sync connection, and now my SX56 is hung on the same message: "Upgrading It will take about 5 minutes....."
Of course, I'm unable to connect back.
Any suggestions?
I'm trying to be able to use it with T-Mobile.
I was unable to get any results by pushing the hard/battery resets.
Thanks!
"COM ports not being available"... Are you using ActiveSync via serial cable or cradle?
If you really cannot connect anymore, I guess you have to use an SD-card and the bootloader method to get back to a working state. But do try to reset the device and restart Programme A., it may just pick up again. I've seen that happen here once.
Try doing a soft reset then put it back in the cradle, the upgrade should restart automatically.
AlexF said:
I have a Siemens SX56, locked to AT&T.
I downloaded the new 1.1 ROM, (Jeff's courtesy)
and began the upgrade.
It started, My SX56 said "Upgrading It will take about 5 minutes...."
Then,
I got an error message on my computer about com ports not being available, it lost the active sync connection, and now my SX56 is hung on the same message: "Upgrading It will take about 5 minutes....."
Of course, I'm unable to connect back.
Any suggestions?
I'm trying to be able to use it with T-Mobile.
I was unable to get any results by pushing the hard/battery resets.
Thanks!
Click to expand...
Click to collapse
Hi Alex,
The same thing happend to me.Could you solve this problem?
If yes,can you pls.tell me: [email protected]
Brgds
rats
Were or are you using a USB hub? If so that may be your problem. The SD Card method works very well and very reliably. No comms outside of the device. I found many times whenn trying to do file xfers to the XDA that for no reason in the middle of transferring a file the connection would be lost.
I haven't had this problem with 2003 and AS 3.7.
USB Problem
Hi Alex and Rat,
i got same problem also, after step 4 my XDA screen become white and hang, if you already solve this problem please send me how to fix it this problem to [email protected]. Do you know how to install wallaby bootloader also.
Hey guys 'n gals
I'm having a prob synchronising my Hermes, either through a usb cable or over bluetooth.
It connects fine, I can explore device and all, but never goes over the "looking for changes" - it just returns a very clear (!) "Synchronization error". No other error code...
The ActiveSync I'm using is 4.1, by the way, and have tried to re-install the driver to no avail.
How do I fix this? It was working a couple of weeks ago, and now no go! Looking back the only thing I did to it was to get it CID unlocked (as described in the wiki), but I think it had stopped working then too....
Can anyone help? Thanks!
Hey All,
I just got my TyTn and decided to upgrade to WM6 - after that my PC never recognized the device - allways says "USB Device Not Recognized". Digged all over, and don't have a clue.
I am using Win XP SP2.
Does someone can help me?
Thanks in advance.
try going to >settings>connections>usb to pc>'uncheck' enable advance network functionality.
Ensure you are running ActiveSync version 4.5 which is available for download from:
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
It worked...
Hey All,
after a few hours going back and forth it worked
I forgot that I was running a windows device, and I had re-started the computer a few times, but after the OS Upgrade I hadn't turned it off and on.
So that's the solution: boot the device. After upgrade the OS to WM6, turn off for real and turn it on again. It'll might work
Problem with the upgrade tytn to wm6
Guys i am having trouble upgrading.. tried to do everything what is said to be done.... but when i start the rom update then the set automatically swiches off and the upgrade fails.. i am using Activesys 4.2... Please heellllpppp!!!!!
Azhar04 said:
Guys i am having trouble upgrading.. tried to do everything what is said to be done.... but when i start the rom update then the set automatically swiches off and the upgrade fails.. i am using Activesys 4.2... Please heellllpppp!!!!!
Click to expand...
Click to collapse
get activesync 4.5
hi
i have a htc touch elf0100 and i'm having a lot of trouble trying to get a connection with my pc. i already read every post here and i don't seem to find the solution to my problem.
here's the thing. i make a hard reset because i was having a lot of trouble with the room that i have so, i decided to make it, but when he reboot it won't pass by the align screen and now i'm stuck in the boot loader screen.
it says that the ipl is 2.27.002 and the spl is 2.28.0000, what i need is to make a connection with my pc so i can flash the room with the one that i have. i try with the mtty but i just can't get the usb port open, and i have try everything.
my o/s is win xp sp3
so please if someone could help me, i'll be very thankful
and i'm sorry about my english, bye.
i think the problem is in mini usb port in ur elf. go to htc customer care.
before sending it off to the care center maybe try a different cable
also..when you plug your device in,does it charge?
I kinda had the same problem which disappeared after a while...
cable
I too had a smiler issue, now Im using the cable that came with my camera, and it works perfectly.
I just have the same problem,changed usb cable,tried on other pc with activesync 4.5 but again csn't syncronize with the phone.plz help.
maybe u can't believe this but i tried device reset via phone menu,then synchronization done ok.