Hello all..
i would like to install an MMS client/program on my MINI:
i would like to install it on the SD card and not in Memory (i didn't install the mms client which comes with ROM).
Thanks ahead,
Lior.
Why would you need it so wierd? Anyway, use the program called Cab installer(available freely) and get the default program taken probably from Ext.ROM and install it to your storage card!
Related
Hi All,
I have an I-mate jasjar, This is the first time i tried installing applications to Storage Card (1GB), when ever i tried to install using Activesync 4.0, It doesnt ask me which folder to install i.e Like Default or Storage Card. And also If i click Add/Remove Programs in Activesync 4.0, I find that the checkbox "install program into the default installation folder" is checked and disabled. Hence I am unable to change it. Find the below image for the same.
Please can some one help me on this, on how to resolve the same.
Regards,
Francis.
Hi Francis,
1. Try inserting a bit smaller memory card (may be 512).
2. check if the momory card is not locked physically.
3. At the lowest, try to hard reset, but keep the memory card inside the i-mate while it install the windows. IMP: dont forget to backup important files before rebooting.
GoodLuck
Sidd
[email protected]
First of all get Active Sync 4.1 from here...
http://www.microsoft.com/windowsmobile/downloads/activesync41.mspx
On WM5 devices like Universal and Wizard I think you choose the location on the device, so you just install to 'default folder' from activesync and when it gets to the phone instead of then going ahead and installing it gives you the choice, phone or storage card.
On 2003SE Windows Mobile, you did have to choose the location on your pc in active sync and when it went to your device it went where you sent it.
Hi,
Mine is a MMC Card, so i dont think it can be locked Physically, also i dont have a smaller card to check whether it works. May be i can try your last option, but i have lot of sms, which will be lost.
Regards,
Francis.
Thanks a lot
As mentioned, whenever I tried to install the application in the PPC it ask me where to install. Thanks a lot !!!
Regards,
Francis.
Did you find out how to load a program to an SD card in the Universal? I want to know too, please.
Whenever I install an application I see a message saying: "This is from a unknown developer, do you still want to install? Press YES or NO." This is the only message I see, no option to install it to the SD card.
Any suggestions please?
Can anyone confirm if cabinstl does anything on WM5?
Its dialog pops up, but then I get the normal WM5 dialog then asking for a destination a second time.
I think I may have confused cabinstl by adding the following registry keys:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Apps\Microsoft Application Installer]
"fAskOptions"=dword:00000001
"fAskDest"=dword:00000001
which will force the Wm5 installer to ask for a destination. This may be useful to those who aren't getting this dialog by default.
However, I want my MTV. And cabinstl. Working. Properly.
V
i've do the reg hack, softreset but nothing succeded! any idea?
I have posted this over at MoDaCo but i thought i would give it a go here as well. :wink:
I stupidly installed MS Global Contact Access (GCA) for PPC on my K-JAM to see if it would work (which it did) but it has caused other problems so i had to uninstall it. This is probably due to MS still not releasing a WM5 compatible version of GCA.
Now, when i open the messaging app and select "MMS Configuration" from the menu instead of the MMS Configuration screen it opens a New Meeting request.
Would anyone know how i can get my MMS config back without a hard reset? Is the setup for MMS in one of the cabs in the extended ROM or is it built into the main System ROM
Any suggestions?
Thanks
Chris
You can download a cab file from club imate for mms, sms settings.
If you know how to access your Ext ROM, you can have a look there and 'guess' the CAB that is resposible for the MMS settings. It should fix the problem.
I recently upgraded my Imate Jam to rom version 1.12 from 1.06. I used to be able to send emails with video or photos using the album program. Now when I try sending photos/videos via messaging using album, it seems to freeze or nothing happens. I did the Big Storage hack, so do I need to install one of those cab files to make this start working?
probably a good idea. I believe the MMS software is installed from the Extended ROM, because it certainly isn't part of the 2003se messaging app as standard.
One of them will need to be installed.....On my t-mobile branded magician, it was called...
"CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB"
should be something similar in your Extended ROM which will then allow you to send them.
Of course, it could be something else entirely!!! :?
Thanks!
Cool! I have that same cab file, so I may just do that! I even tried going into the messaging program and tried to add an attachment, which didn't work either. I got an error message about inserting a correct storage card, but my video was located in the main memory.
Not working!
Well, I installed the MMS Arcsoft cab file from the extended rom. It added the ability to send through MMS in Messaging, but it still cannot send photos/videos by clicking on the "send via email" selection in Album. I can't even add an attachment using Messaging. I get an error message stating that I need to insert the correct storage card. Can anyone tell me what I should do? I did not have this problem when I was using the Rom version 1.06 for my Imate Jam. I was able to just add an attachment or send videos via the Album program. In 1.12.10 rom, it is not working!
Does anyone have any solution? I saw one post where someone said they deleted their pmail attachment directory in the registry, and it worked for them; but I tried it and it didn't change the problem. I can't figure out how to add attachments to my emails.
Try to install all cabs from extended rom one by one and check for results every instalation.
I installed all the cab files but it still did not let me add attachments via messaging or album. However, I did a hard reset and tried attachments - it worked perfectly. I am not sure what caused the problem, but I hope it isn't the BT patch. I plan on doing a restore w/ Sprite Backup and hope it still works.
Hi
I think I have a possible solution. Take a look at the attached file. It was in the o2 Active CAB file, and apart from setting up the connections, etc, it also enables MMS in outlook.
If someone can make sense of this, please help.
cya
Did you install the Ext ROM?
Well, I had the same problem with my T-mobile phone which I used for O2. I did not install the Ext ROM of my unit and there isn't any option for MMS. I solve it by digging into the Ext Rom and find one of the CAB (guess by its name) to install. And.. it works. I think you have to set some of the MMS settings which you can get from the web for your servic eprovider.
Yes, but I installed it using hte o2 Corporate mode. It adds the MMS account only when using Basic version. But the problem with that is you get loads of o2 active crap....
Thanks
Hello,
I am trying to use this cab (http://anthony.bemaniso.ws/TCPMPflvplugin-v0.4.2.CAB) for visitors on my site, the only issue is regardless of where the user choses to install it (Locally or Card) it installs locally. What I need it to do is install to:
'My Device -> Program Files -> TCPMP' if Device is selected
OR
'Storage Card -> Program Files -> TCPMP' if Storage Card is selected.
The issue here is I don't know jack **** about cabs. I need the rebuilt cab to be installable on all versions of WM (2002 - WM6, WM Pro and Smartphone). I'd be glad to paypal the first person to reply with a working rebuilt cab $5 to make up for the work.
-Anthony
Cab file
tpmwr said:
Hello,
I am trying to use this cab (http://anthony.bemaniso.ws/TCPMPflvplugin-v0.4.2.CAB) for visitors on my site, the only issue is regardless of where the user choses to install it (Locally or Card) it installs locally. What I need it to do is install to:
'My Device -> Program Files -> TCPMP' if Device is selected
OR
'Storage Card -> Program Files -> TCPMP' if Storage Card is selected.
The issue here is I don't know jack **** about cabs. I need the rebuilt cab to be installable on all versions of WM (2002 - WM6, WM Pro and Smartphone). I'd be glad to paypal the first person to reply with a working rebuilt cab $5 to make up for the work.
-Anthony
Click to expand...
Click to collapse
Here you are... Forget money
Hey, I really appreciate it man, and so do the visitors of http://ytpocket.ath.cx . I'll make sure to give you some credit for your work on the site!