i upgraded to the new K-Jam rom from the Clubimate ftp site, and it upgraded very nice, i noticed alot of speed issues on the new rom (but that maybe because of the arabic extrom) and i decided to live with it.
BUT...
when i wanted to make a phone call, i had these problems:
1- it didn't connect to my Jabra bt500 headset, even though it's paired & shows in the bt list of paired devices.
2- the sound didn't come out of the speaker, it works ok through the loud speakerphone, but not through the speaker.
i downgraded back to the previouse rom thinking it would work back normal, but it didn't, i'm still stuck with the out-of-order speaker.
can anyone help me in this? is there something i can do before taking it to the service center?
thanks.
Hello.
After i install an BT Headset from an freend i can't make phone calls without this Headset. The Speaker of my XDA mini does not work by calling. Ringing and all other Audio funktions are O.K., but by calling the speaker is death. BT Handset or Handsfree calling are ok.
Any one a Idea how to solve this problem?
Hi Dark Angel,
Have you solved the problem? I have similar problem. Can you help?
Hello leszazous.
Yes, i have solved the problem...
Download and instal this BT Stack: http://forum.xda-developers.com/viewtopic.php?t=33532
Reboot your PDA and be happy...
Hi Dark Angel,
Thanks for you info. I downloaded the BT Stack and installed it on my O2 Atom. Unfortunately, it crashed my Atom and forced me to hard reset my Atom.
But, the problem with the headset gone away! :wink:
Just gone thru the painful restoring process now. Though, the problem is solved anyway.
Hi leszazous
I'm so sorry to read, that your Data is going away...
When I answer a call using the button on the phone and the wired headset is connected, it seems to be that it's trying to use both phone and headset speaker & mic, the result it a very distorted call, unless I then unplug and reconnect the headset. Anyone else having this issue?
Orange SPV M3100
Rom 1.23.61.4
Radio 1.06.00.00
Ident Herm100
No addon dialer / management software, only apps loaded are tomtom 6, MS Reader.
Yes, I have exactly the same problem. I have now tried three TyTNs (well, vodafone v1605s) and all have exactly the same problem.
Unplugging and plugging the wired headset back in resolves the issue, but is not great when it is illegal to do this when driving...
Vodafone v1605
ROM version: 2.04.161.2
ROM date: 01/18/07
Radio version: 1.32.00.00
No other software installed.
I've tried three headsets, also tried these headsets on an Orange SPV, a E650 I think, and they work fine.
Must either be a hardware fault with the TyTN or a software issue that has not been spotted yet (1.23.61.4 -> 2.04.161.2)... hasn't it??
I am sending the TyTN back and getting a TyTN II, hope this hasn't inherited the same problem.
guys - gals.... I have upgraded to black 2.0, and I am not sure if that or if a drop caused the total loss of sound, but everything else works fine. I had Kuphers 2.0 before and no problems. I guess i cant even remember if the sound work after black installation. So strange. The speaker works and i can install a headset. but no speaker volume. should i reflash?
olipro latest radio 1.40 or 38 i think and have never had any upgrade problems in the past.
What about a soft reset?
If not I would maybe reflash..
Plug the wired headset in. if the sound works through here, but not through the speaker, chances are the drop has done the speaker in. reflash the original rom and send it to the repair centre. will probably cost you though.....
ok i might the dopod test rom
Strange that headset and tested a bluetooth stereo headset all work. no speaker sound. Probably try reflashing. I did register it with dopod, so at least i am covered there unless they are picky about rom cooking.. i kind of miss the U got mail references typical in the Dopod Roms. Ironic that they have a leaked wm6. thanks
Hey Folks,
I have been reading some posts here about BT and/or BT Mute problems, but my issues seems to be a bit different, plust I didn't have it 1-2 Months ago, so I think it might be ROM/Radio upgrade related ...
Right now I am running udK Diamond R8 which works perfectly fine in general.
I got my phone hooked up via BT to my car BT handsfree (it's a Peugeot 207cc which uses some Parrot BT stuff I think). This used to work perfectly fine when I first started using the polaris in the car. I don't remember when the problem started to appear, but now, when I receive and accept an incoming call, it takes 4-5 seconds, till the polaris switches audio to handsfree, meaning after accepting the call, I can't hear the other party on my car speakers ... but I can hear sound from the regular polaris speaker, very quietly of course.
After those 4-5 seconds, everything is fine and the call is switched to the car handsfree set.
The BT connection to the car set is fine all the time ... no problems connecting or pairing.
Anyone experiencing similiar issues?
boba
Hi,
I have exactly the same problem with my C4 BT handsfree system (Parrot BT components) for some months ago. I have had a look at a lot of forum, but no answer and no solution.
Some days ago, I flash my HTC Polariswith the original WM6.1 Fre, but no improvement. I still have the same problem, 4/5 seconds before hearing the caller.
(PS : sorry for my poor english )
Bemi
Same for me, it worked fine before with the original ROM
ROM : 1.25.406.1 FRE dated 12/12/07
Radio : 1.58.21.23
Protocole : 25.65.30.04H
It happened suddenly.
I tryed a lot of modifications in the register, but no improvement.
I hoped to resolv this problem with the new original WM6.1 but no improvement.
Next week, Citroen will change the radio (it stops working many time a day).
I hope this will resolv the problem.
Bemi
I don't know excatelly the model, but it's the one with Bi-Tuner, BT, MP3 and without Navidrive.
Bemi
Same for me "and without Navidrive"
Probably the RD4
Bemi
Today, I tried several other mobiles (Samsung, Sony-Ericson, Eten, Alcatel) for my problem of delay with incoming calls.
All of them work properly and, as soon as I receive and accept an incoming call, the sound switches directly to the handsfree of the car.
So, what is the problem with my HTC Cruise ?
Any idea ?
Bemi
i'm having the same problem with a Sony DR-BT20NX headset
It has been working earlier.
But now , on incoming calls , the phone ring and later i ear a little signal in the bluetooth headset.
To accept the call , i've to use phone buttons ) .
The sound comes out the phone .I've to speak in the phone.
Otherwise i can listen music with the BT headset and make outgoing calls.
Rom : M-Amine 2.FRE
Radio : 1.59.42.15
( same problems with PDA viet Rom's V33 à V35 )
I don't remember if i've the problem since i've upgraded to radio 1.59.42.15 , sorry
Never had answers on differents forums ..
BT Joined Stereo
install advance config tool v3.3
go to BT setting
verify that your option is Joined stereo and not mono
I'm using udK Diamond R8. I had a lot of problems with my Parrot ck3100 carkit. It was finally resolved by installing the Murata 1.58.21.23 radio. With the for R8 recommended radio I had bad GSM reception, BT connection failure, random BT mute, Parrot displaying the call would continue when I in fact hang up etc.
Hi,
No change with Advanced Config Tools V3.3
Bemi
I have a different BT problem.
i am currently running Touch-IT m2d Beta. but i have always had this problem, even on the original official rom.
i pair my phone with a JVC KD-BT1 CD Head Unit in the car.
i sent this to HTC support (before i started flashing new roms to my cruise):
------------
HTC Touch Cruise. rom: 1.26.710.1 wwe radio: 1.58.21.23 protocol: 25.65.30.04h. bluetooth problem. when i have BT enabled on the htc, i get in the car and it pairs with my audio system. after i make the first call it disconnects (stops pairing) after the call is finished and then after 60 seconds, it pairs up again and i can make a call again. this happens after every call. i had a nokia and i-mate jasjam before with no problems whatsoever. any patch or update available?
------------
AND THIS WAS THEIR REPLY:
-------------
Bluetooth should be universal or is marketed as universal although it is far from the truth. Certain chipsets conflict or are incompatible with others. If a device is not fully compatible it will not offer all features or possibly not connect at all. I have included the below for current tested devices.
-------------
I DON'T think this is going to be fixed any time soon, so i'll live with it!
Hi every body.
I've got the same problem.
A Cruise Rev B, and a BT car's Kit (included in a peugeot, I thing a RD4/parrot stuff)
Actually my first call is ok, and then, heads phones are cutted (sometimes after 3 or 4 seconds), but my microphone still works.
My car's BT is still paired, and sometimes indicates that I'm still phoning, even if I've cutted it on my phone.
I'm happy to find some user's in the same "panade" than me, but I hope we will find a solution...
Who knows how it works and communicate?
It has to be radio problem.
Originally I had WM 6.0 Pro on my Polaris, and BT was working flawlessly.
Then I was stupid enough to upgrade to 6.1 WWE, and now I have all kind of trouble with BT connectivity. Downgrading back to 6.0 DID NOT help!
InSomNiaK said:
A Cruise Rev B, and a BT car's Kit (included in a peugeot, I thing a RD4/parrot stuff)
Actually my first call is ok, and then, heads phones are cutted (sometimes after 3 or 4 seconds), but my microphone still works.
My car's BT is still paired, and sometimes indicates that I'm still phoning, even if I've cutted it on my phone.
Click to expand...
Click to collapse
I have exactly the same problem, based on a slightly different configuration:
My car is a Citroen (with the RD4/parrot factory built in BT)...
My phone is a HTC TyTNII.... with WM6 I couldnt even pair the phone, so I upgraded to WM6.1
Actually I had to drive to the workshop to cut the power on the car, because the parrot BT unit wouldnt stop even tho my phone was off in the meantime.
I start to believe this is not a problem caused by my phone, but a fault SW version on the parrot unit.
I have pioneer deh-p7000bt and it works flawlessly with my polaris in handsfree and a2dp mode.
to have better quality i have to turn srs wow hd off.
in advanced config i set:
-use joint stereo: no
-bitpool: very high
-max bitpool: 64
-min bitpool: 32
-sample rate: 44100
-audio getaway: enabled
Is there anyone who solved this problem yet? I have the exact same problem. When someone calls me, I cannot hear the other party through my car speakers (Citroën C5 newest model without navidrive)
I just tried http://www.jetwaremobile.com/ and this seemed to solve my problems. I had to restart my TC after installing this and removed the relationship in my car. After I made a new relationship (pairing) everything seems to work fine. If this changes I'll let you know.
I am having the same trouble, which started after upgrading to WM 6.1. Am I right in understanding that the Bluetooth is controlled by the Radio ROM and if so is it possible to downgrade just the Radio ROM? I think mine originally came with 1.58.25.14 and the upgrade replaced it with 1.59.42.15, is there a procedure to do this, and has anyone had any success.
Sorry had a search and found http://forum.xda-developers.com/showthread.php?t=381600 which shows how to install just radio ROM, am just unclear as to whether you need to install Hard-SPL first as it is an official ROM and as to if changing radio clears all personal data from the phone.
I use to have a similar problem with the 4-5 second delay. i found that once the car is paired up with the phone, i ran bluetooth audio toggle, or other bluetooth audio program which makes all audio go through the vehicle all the time, including GPS navigation. This way when the phone rings, the ringtone can be heard through the speaker and when you answer it will be instantanious....... in theory.......... i mean, it worked for me anyway....
Then all you have to do is find some way to auto run the toggle everytime you pair your device to the vehicle...