disconnect grps after mms sent/recieved..how? - 8125, K-JAM, P4300, MDA Vario General

all im seeing is ways to keep it connected, i checked wiki and there is only ways to keep gprs on!

I don't think there is a way to make it automatically disconnect after sending an MMS. The only ways I've seen require user intervention, eg a button press or screen tap...
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
Once you've done that, and soft reset etc, you can tap the G icon and press disconnect.
OR
Press and hold the red call-end hardware button for a few seconds and you'll see the GPRS icon change from connected to disconnected.

Check in MMS Settings->About if you are using ArcSoft MMS Composer. If so, go to HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI registry key and check if integer parameter called AutoDisconnect is present and set to 1. I guess it is auto disconnect after sending/receiving MMS. I have it already delivered in Extended Rom cab file containing MMS settings from my operator.

im using the default poutlook.exe app for my MMS

in the qtek 9100 external rom, there is a cab file called "MP_MMSAutoDisconnect_060106.CAB" that does this.

hmm ill check that out then

SkyyBoy said:
in the qtek 9100 external rom, there is a cab file called "MP_MMSAutoDisconnect_060106.CAB" that does this.
Click to expand...
Click to collapse
i dled the 3 ext_rom files on ftp not seeing this file.. can u post?

here it is!

This .cab does exactly the same in registry
Anyway, thanks for it, may be helpful to fast re-enable auto disconnect after HR.

i have set 1 but it doen't work

Try this, worked for me
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm

i forgot all bout that program i used it on my hp6515. thank you

Related

Simple GPRS on and off ?

Is there a way to turn GPRS off ? I tried registry tweaks but the GPRS off option will not stick for me everytime I reset and check it unchecked again.
A Shortcut or a simple app to turn off and on would be a godsend.
holding down the hang up button for awhile disable grps on at least himalaya
and there is a program which let you connect and disconnect in the same place you turn flight mode on and off
problem is this still allows gprs to connect when you use ie or sync email, I do not want it to connect auto to gprs unless I say so
then pick work rather then my isp under connections
I have a tmobile 'mda' in the us and I did a registry edit that made it so when i tap and hold the gprs icon at the top it has a timer and a disconnect button.
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
from this page: http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
bendog that a very nice suggestion, thank you.
Lucky for me as part of the t-mobile uk phone you get sbp gprs monitor included, and this sits in the task bar and has a connect and disconnect button already.
Again it does help disable GPRS till I really want to use it.
Rudegar said:
then pick work rather then my isp under connections
Click to expand...
Click to collapse
Tried this also, it doesn't seem to care, it connects anyway whenever my email interval says so.
Is there any other APIs like connection manager,RAS to dis/establish GPRS on WM 2005?
this should do the trick
see:
http://www.gb-soft.cz/XDAII/product_gprs_tweak_en.htm
(haven't used it yet so no guarantee it works)
There is also a program called "NODATA" to disable (temporarily) GPRS...
Just need summat to log it now
try vjvolubilis. you can easily make shortcuts to toggle, bluetooth, wifi, gprs, audio, etc...
http://www.vijay555.com/?Releases:VJVolubilis
There you go.
NoData from Modaco. Does exactly what you want. Disables GPRS until you want to turn it on again. Overrides all programs that require access to the internet. Excellent for when you are on international roaming or when your battery is dying.
http://forum.xda-developers.com/showthread.php?t=286844
So far I've tried all these on my BA (XDA IIs) to no avail.
However, a rather dirty solution has been to set up a new 'dummy' modem connection dialling my own number or '0' and setting that as the default. I then need to change it back to the other settings to allow web access via the 'phone.
Would rather have a nice button though...

Qtek 9100 - bluetooth can send file but can't receive file

hi....
as mention above, im using a G3 qtek 9100, recently i found that when i turn on bluetooth (discoverable mode), i can send file to others, but i can't accept file from others. i have tired use pda phone and normal nokia phone send file to my qtek 9100. any 1 facing this problem before?? plz give me some solution. thx
p/s: anyone know how to set or use software, so that when someone use bluetooth and send me file, i have a msg that can choose accept or reject
try this, it worked for me:
Enable/disable receiving files over BT: change reg key to 1
HKLM\Software\Microsoft\Obex\IsEnabled = 1 (DWORD decimal)
kelu said:
try this, it worked for me:
Enable/disable receiving files over BT: change reg key to 1
HKLM\Software\Microsoft\Obex\IsEnabled = 1 (DWORD decimal)
Click to expand...
Click to collapse
how to edit registry? is that need any software?
For people like you, it's better to stay away from the registry until you understand more of it.. here's a better way to do it...
start -> Settings -> Connections(tab) -> Beam
Check the Receive all incoming beams checkbox...
see is this works...
i'm having this issue too, please somebody help me here.
solution on previous post didn't work.
when sending files from my pc an error says "FTP service not found on target device"
on G4 cingular 8125 with love_rom 2.26
Hello every body, firstebal i love this site.
I'd got the same problem, enable to send but impossible to receive anything, in fact i just go in beam menu and select receive and the receiving bluetooth work !
anyone eith the same problem? did it happen to anyone, how did you fix it?
vseehua said:
For people like you, it's better to stay away from the registry until you understand more of it.. here's a better way to do it...
start -> Settings -> Connections(tab) -> Beam
Check the Receive all incoming beams checkbox...
see is this works...
Click to expand...
Click to collapse
you're the best! it worked!
kelu said:
try this, it worked for me:
Enable/disable receiving files over BT: change reg key to 1
HKLM\Software\Microsoft\Obex\IsEnabled = 1 (DWORD decimal)
Click to expand...
Click to collapse
Hi , the same problem, above didnt work for me, it was allready set to 1.
also my IR is not workin at all.
help. Kris

MDA won't snyc / update time with Tmobile??

i just got a MDA replacement, and unlike my old MDA, this one does not update its time after i reboot. I realize this after a battery change, and i tried to find out why.
I tested with the old1.08ROM, 2.26ROM, and i am using XDA's WM6 ROM, and my MDA just won't sync the time with tmobile. I have to manually adjust the time every times!
does any one have this issue, and perhaps know to fix it?
thanks
Is there a time sync tab in your phone settings. If so, ensure that the checkbox is checked. If not, try this reg tweak from the wiki then enable the checkbox.
HKLM\SOFTWARE\OEM\PhoneSetting\ShowTimeZonesPage = 1 (DWORD decimal)
the reg key is there already. but I don't have an option where it say sync time.
zakhir_n said:
Is there a time sync tab in your phone settings. If so, ensure that the checkbox is checked. If not, try this reg tweak from the wiki then enable the checkbox.
HKLM\SOFTWARE\OEM\PhoneSetting\ShowTimeZonesPage = 1 (DWORD decimal)
Click to expand...
Click to collapse
thanks for answering this question...your response saved me a great deal of heart ache....

Disabling the Connecting Dialog from appearing?

Hi all again. How do I disable the Connecting Dialog Pop Up Display from showing when phone is connecting to 3G/Edge? Somewhere in the registry? Or is there a app that can tweak this setting?. Thanks
Add a 'Disconnect' button and Timer to the Connection List for GPRS/HSPDA:
Make the following changes in you registry:
HKLM\ControlPanel\Phone\
Add "Flags2 = 16" (DWORD decimal)
Next time try to search instead of open new thread....
And try to follow the link on my sign....
Actually I did a search first. Wrote "disconnect dialog" or "internet dialog connection" connection popup" "connection message"and got no result in my end. Will try better next time I guess. thanks.

Data connection - Enabled = 0 in registry not respected after usage

Hi *.
I have data connection called "Internet". Selected as default in Settings -> Connections -> Advanced -> Select Network and disabled with Enabled = 0 registry key. When I want to use it, I just change to Enabled = 1. Simple and fast.
But after I'm done with checking emails, disconnect "Internet" and change back to Enabled = 0, Windows still "remembers" that this connection is usable and ignores registry. I have to soft-reset to make it "forget".
Is there any way to avoid this?
You need to do a soft reset after registry changes to fully save the change.
If you don't want the data line to stay on then don't make that registry change. When you select "Send/Receive" in Outlook the data line will come on automatically. You can also turn the data line on by launching Internet Explorer.
That regsitry key is really for people who want the data line to stay on all the time.

Categories

Resources