hi....
as mention above, im using a G3 qtek 9100, recently i found that when i turn on bluetooth (discoverable mode), i can send file to others, but i can't accept file from others. i have tired use pda phone and normal nokia phone send file to my qtek 9100. any 1 facing this problem before?? plz give me some solution. thx
p/s: anyone know how to set or use software, so that when someone use bluetooth and send me file, i have a msg that can choose accept or reject
try this, it worked for me:
Enable/disable receiving files over BT: change reg key to 1
HKLM\Software\Microsoft\Obex\IsEnabled = 1 (DWORD decimal)
kelu said:
try this, it worked for me:
Enable/disable receiving files over BT: change reg key to 1
HKLM\Software\Microsoft\Obex\IsEnabled = 1 (DWORD decimal)
Click to expand...
Click to collapse
how to edit registry? is that need any software?
For people like you, it's better to stay away from the registry until you understand more of it.. here's a better way to do it...
start -> Settings -> Connections(tab) -> Beam
Check the Receive all incoming beams checkbox...
see is this works...
i'm having this issue too, please somebody help me here.
solution on previous post didn't work.
when sending files from my pc an error says "FTP service not found on target device"
on G4 cingular 8125 with love_rom 2.26
Hello every body, firstebal i love this site.
I'd got the same problem, enable to send but impossible to receive anything, in fact i just go in beam menu and select receive and the receiving bluetooth work !
anyone eith the same problem? did it happen to anyone, how did you fix it?
vseehua said:
For people like you, it's better to stay away from the registry until you understand more of it.. here's a better way to do it...
start -> Settings -> Connections(tab) -> Beam
Check the Receive all incoming beams checkbox...
see is this works...
Click to expand...
Click to collapse
you're the best! it worked!
kelu said:
try this, it worked for me:
Enable/disable receiving files over BT: change reg key to 1
HKLM\Software\Microsoft\Obex\IsEnabled = 1 (DWORD decimal)
Click to expand...
Click to collapse
Hi , the same problem, above didnt work for me, it was allready set to 1.
also my IR is not workin at all.
help. Kris
Related
hi all,
i want to have Gprs disabled on my Qtek9100 does anyone know how? i tried the End Call Button but without success. Any suggestions?
thx
You have to hold it down for a few seconds
Don_Zakaria said:
hi all,
i want to have Gprs disabled on my Qtek9100 does anyone know how? i tried the End Call Button but without success. Any suggestions?
thx
Click to expand...
Click to collapse
Do you want to disable it permanently or just temporaly?
Permanently - Delete the GPRS settings from "Settings" > " Connections"
Temporaly - Hold 3 seconds of the "End Call" button.
bolasz said:
Don_Zakaria said:
hi all,
i want to have Gprs disabled on my Qtek9100 does anyone know how? i tried the End Call Button but without success. Any suggestions?
thx
Click to expand...
Click to collapse
Do you want to disable it permanently or just temporaly?
Click to expand...
Click to collapse
i did but did'nt help!
bolasz said:
Don_Zakaria said:
hi all,
i want to have Gprs disabled on my Qtek9100 does anyone know how? i tried the End Call Button but without success. Any suggestions?
thx
Click to expand...
Click to collapse
Do you want to disable it permanently or just temporaly?
Click to expand...
Click to collapse
Yes i want to disable it permanently if possible
williamchan_hksar said:
Permanently - Delete the GPRS settings from "Settings" > " Connections"
Temporaly - Hold 3 seconds of the "End Call" button.
Click to expand...
Click to collapse
about the permenantly part i really don't understand what you mean, i tried what i understood but no success..
about the temporarly part i tried that already but no changes
When you see the G symbol in a white square, GPRS is possible but not connected and therefore not consuming data. When you see a small G in a small white square, with two arrows beside it, GPRS is connected and can use little amounts of data to keep the connection alive. If you have a GPRS connection (little G, two arrows), press and hold the red button for 5 secs and the symbol will change to a large G in a white box. That means you have just dis-connected your GPRS connection. If you start MSN or IE, a connecton will be established and data will be sent, so it will cost you money. You will see the G symbol change then. So, if you see only a large G in white box, no worries, GPRS is disconnected. If you see small G with two arrows, press and hold red button till symbol changes to big G and connection is ended.
The permanent solution suggested above means that in the start-settings-connections-connections menu you empty one of the boxes in your accounts, e.g. the doamin name etc. In that way, your GPRS connection cannot make a connection because the right values are not there. Problem is: when you want to use GPRS, you will have to fill in the correct values again so you will have to know what to till in in what box. You can also delete the whole connection (e.g. T-Mobile GPRS or similar) to get rid of the account entirely.
You can also install this little freeware program, if you click on the GPRS symbol it gives you a disconnect button in the pop-up, making it possible to disconnect a connection (the symbol changes into a large G with white box).
Hope this helps.
Doesnt work on my Qtek 9100, no extra button after connect.
Sometimes ago I used SPB GPRS Monitor that have extra buttons to connect/disconnect.
be sure to soft reset after installing, worked on my Vario. Also, be sure to tick the appropriate boxes in the GB soft tweak CPl applet in start-settings-system.
Today another thread was posted that gave the reg edit for the disconnect button and connection timer, search for posts made today or yesterday. I'm sure you'll find the regedits in that post. it was in HLKM/Controlpanel/phone, make a Dword names Flags02 with hex value 10, if I'm correct. save and soft reset, button should be there. this gives you the button, but not the other GB options, which I find usefull as well.
OK... its a little easier than you all think.... go to settings / connections / create a new dummy dial out entry and set that to be default rather than Autopick....
It will never use GPRS again cos it cant dial out... you may get the odd message still though. Nowt you can do about that as thats down to the OS and software.
Terran
thanks very much for the app,works perfect 8)
thx guys it seems to be Ok now
all im seeing is ways to keep it connected, i checked wiki and there is only ways to keep gprs on!
I don't think there is a way to make it automatically disconnect after sending an MMS. The only ways I've seen require user intervention, eg a button press or screen tap...
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
Once you've done that, and soft reset etc, you can tap the G icon and press disconnect.
OR
Press and hold the red call-end hardware button for a few seconds and you'll see the GPRS icon change from connected to disconnected.
Check in MMS Settings->About if you are using ArcSoft MMS Composer. If so, go to HKLM\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI registry key and check if integer parameter called AutoDisconnect is present and set to 1. I guess it is auto disconnect after sending/receiving MMS. I have it already delivered in Extended Rom cab file containing MMS settings from my operator.
im using the default poutlook.exe app for my MMS
in the qtek 9100 external rom, there is a cab file called "MP_MMSAutoDisconnect_060106.CAB" that does this.
hmm ill check that out then
SkyyBoy said:
in the qtek 9100 external rom, there is a cab file called "MP_MMSAutoDisconnect_060106.CAB" that does this.
Click to expand...
Click to collapse
i dled the 3 ext_rom files on ftp not seeing this file.. can u post?
here it is!
This .cab does exactly the same in registry
Anyway, thanks for it, may be helpful to fast re-enable auto disconnect after HR.
i have set 1 but it doen't work
Try this, worked for me
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
i forgot all bout that program i used it on my hp6515. thank you
i just got a MDA replacement, and unlike my old MDA, this one does not update its time after i reboot. I realize this after a battery change, and i tried to find out why.
I tested with the old1.08ROM, 2.26ROM, and i am using XDA's WM6 ROM, and my MDA just won't sync the time with tmobile. I have to manually adjust the time every times!
does any one have this issue, and perhaps know to fix it?
thanks
Is there a time sync tab in your phone settings. If so, ensure that the checkbox is checked. If not, try this reg tweak from the wiki then enable the checkbox.
HKLM\SOFTWARE\OEM\PhoneSetting\ShowTimeZonesPage = 1 (DWORD decimal)
the reg key is there already. but I don't have an option where it say sync time.
zakhir_n said:
Is there a time sync tab in your phone settings. If so, ensure that the checkbox is checked. If not, try this reg tweak from the wiki then enable the checkbox.
HKLM\SOFTWARE\OEM\PhoneSetting\ShowTimeZonesPage = 1 (DWORD decimal)
Click to expand...
Click to collapse
thanks for answering this question...your response saved me a great deal of heart ache....
Hi all,
I have a problem that appears on the WM6. It worked
fine on WM5 .
On my P3300 wm6 when I click to Send/Receive my e-mail a messagebox pops up saying "Currently the roaming mode is active. The sync can be more expensive"
(I have an dutch version so the message could be a bit different, sorry).
I cannot understand how remove this warning, if there are any settings or register changes i can do...
Thanks you in adnvance
Go to: Key: HKCU\Software\Microsoft\Inbox\Settings\
And this there:
ShowRoamWarning
Value: DWORD:0
Have you gone into ActiveSync, menu, schedule and checked the box "Use above settings when roaming"?
This will enable auto syncing when roaming and you shouldn't get the message when roaming - at least I don't with the WM6 versions on my Touch, Trinity or Herald.
THNX !!!
Sane said:
Go to: Key: HKCU\Software\Microsoft\Inbox\Settings\
And this there:
ShowRoamWarning
Value: DWORD:0
Click to expand...
Click to collapse
THNX ! ! ! !
llampie said:
THNX ! ! ! !
Click to expand...
Click to collapse
+1
PS: Why 10 characters?
Hi, all. i had found a different registry changes on wm6 and wm6.1 actually on obex service. Here is:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"IsEnabled"=dword:1
1 = that's mean obex service will loaded at startup and u 'll be able for receiving files.
0 = That's mean unloaded obex service and disable receiving files
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"ObexServiceMask"=dword:3
3 = that's if u check "receive all incoming beams" on settings->connection and u 'll be able to receiving files till u uncheck this.
2 = if u uncheck.
So, if you want to enable receiving files, make sure "IsEnabled" always at value "1". And for activated/deactivated it throught check or uncheck beam on settings->connections
regards,
Added: For some devices who can't open some address on pie
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main]
"EnableHighResolution"=dword:1
Thanks for sharing!^^
awesome, bro. very useful for a chefs...
move "usb to pc" on the right place
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\PCConnection]
"Group"=dword:2
thanks bro
Useful found and appreciate it. great dude.
Thanks!
I am now able to send files between my two devices. Thanks. Great job
Thanks for the info.
I'll try some of this out. I was having BT problems.
Well that explains why i never had any issues with file transfer in WM 6.1
Obex has been set to one for months.
But now i can at least explain it.
Great !
it's working like a charm !
abusalza said:
Hi, all. i had found a different registry changes on wm6 and wm6.1 actually on obex service. Here is:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"IsEnabled"=dword:1
1 = that's mean obex service will loaded at startup and u 'll be able for receiving files.
0 = That's mean unloaded obex service and disable receiving files
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"ObexServiceMask"=dword:3
3 = that's if u check "receive all incoming beams" on settings->connection and u 'll be able to receiving files till u uncheck this.
2 = if u uncheck.
So, if you want to enable receiving files, make sure "IsEnabled" always at value "1". And for activated/deactivated it throught check or uncheck beam on settings->connections
regards,
Click to expand...
Click to collapse
hi
i did that. an another device knows my device. but at the begining of transfering it canceled. what should i do ?