Radio 1.04 hangs - PDA2, XDA IIi, 2020i Software Upgrading

my alpine suddenly stops receiving phone calls though the signal reception indicates strong signal. the only way is to reset.
1. any idea as to a possible reason?
2. what is the latest radio rom for alpine?

HELP!!!!
i have exactly the same problem!
full bar signal strenght but cannot receive calls/sms/mms and even make calls/sms/mms...!
wat causes this?
is it because if the software i installed?
i installed :
SPV Pocket Plus 3.0
SPV GPRS Monitor
Resco File Explorer
TCPMP Player
Opera Browser
some one pls help!

Related

T-Mobile 4.00.10 beta stability?

:?:
How's the new one holding up? Anything different from the other WM 2003 betas? What about the problems with SD cards getting erased for no apparent reason....has that been fixed? :-D
Well since its the T-Mobile test ROM, we got back the following:
Today screen plug-in that displays T-Mobile, Call Log and Voice Mail
SMS Message from the New menu is back
Battery Monitor is back on the task bar (the one at the bottom of the screen).
T-Mobile is being displayed as your carrier as it should on the phone display.
Battery life is much improved as with the other betas.
Your T-Mobile connection settings are back.
Its pretty stable to me haven't had any problems with Alarms, erased SD cards and the such.
HTH
I upgraded the ROM yesterday and kept the AT&T A.20.10 radio stack. It definitely seems more stable, although the signal strenght meter shows weak signal, but I have not had any problems connecting.
sskarlatos said:
I upgraded the ROM yesterday and kept the AT&T A.20.10 radio stack. It definitely seems more stable, although the signal strength meter shows weak signal, but I have not had any problems connecting.
Click to expand...
Click to collapse
So it is the radio stack that controls the signal meter and not the ROM!
I also forgot to note that the SIM Tool Kit has been removed from the T-Mobile ROM.
Stability
I've had major stability issues ever since I installed the T Mobile rom on my Qtek P1010 (PW10A1, O2 Radio Stack 4.21.00).
The xda has crashed on me on many occassions, I've been stuck in the middle of a call without being able to hang up, have had issues taking a call, and even using the buttons.
Using the TMO rom on O2 XDA - stability seems fine - not yet erased an sd card, the GPRS works fine, but the phone buttons do not seem to answer or drop a call - I have to use the screen options.
Hmmm. I think I read the 4.00.05 beta had the phone button problem too. Or I could be wrong...
I've been using it for about 3 days now w/ no problems. About 100x better than my 3.17 ROM from TMO. It's about time I can rely on this thing. Call quality is much better and I no longer drop calls where I did w/ previous radio stack & ROM.
working fine for 24 hours.
I upgraded to 4.00.10ENG ROM and the 6.24 Radio stack yesterday. So far, it works great.
The signal meter is trending a little bit lower than when is was running the ATT radio stack, but the call quality is better.
Is it me, or has the ability to disconnect a GPRS connection gone away? I have to turn off the phone to break the connection.

when listen to streaming radio using GPRS cannot receive cal

Did anybody have any solution to fix this problem?
when listen to streaming radio using GPRS cannot receive call.....
HELP HELP HELP!!!!
Did anybody have any solution to fix this problem?
when listen to streaming radio using GPRS cannot receive call.....
HELP HELP HELP!!!!
Streaming over GPRS? You can do that? You're the first one I hear from who succeeded in doing this. That must be with bad quality and low bitrate, right?
Concerning the question, isn't it, that usually the GPRS connection gets lost when someone calls? Maybe when permanently stressing the channel with streaming, it doesn't receive the call notification. Just a guess. Maybe also a bug in the firmware. Which version do you use?
I use GPRS connection to listen streaming radio in Hong Kong...
sure the bitrate is enough, as it does not need huge bandwidth for audio streaming.....
For using GPRS connection to Browsing or send and receive email, it is no problem, when call come it, it will auto disconnect my GPRS.... but for listening streaming radio, it cannot......
Here is my PDA information:
O2 Mini
ROM version: 1.11.00WWE
Radio version: 1.13.00
ExtROM version: 1.11.922WWE
Please please help, if any body can.....
Thanks
Well, then my guess really is that no channel is free for the incoming call notification when you "stress" your mobile link via GPRS with an audio streaming since that's the only difference I can see in terms of the mobile network. I guess there might be no workaround, only you can try the latest radio update.
Thanks a lot......
If anybody can solve this problem, please post out.....
Many Many thanks
Hi,
The phone module that comes with XDA II is a Class B GPRS specs. This means that it can only do one function at a time either GPRS or GSM phone but not simultaneously. For that you need a Class A GPRS device. I do not know of such a phone device in existance. What I do know is that 3G does support both data and voice call simulatenously. So the one to kill for is the HTC Universal. Thanks.
Regards,
Kueh.
I dont't need the function which GPRS and GSM phone connect together...
What I need is just as normal, when phone come in, it disconnect my GPRS..... then it will be fine........

XDA Exec Problems; Signal & Today Screen

Hi,
I have an O2 XDA Exec with the latest ROM version, on an Orange Pay Monthly SIM.
Anyway, im having two annoying problems with it;
Firstly, every now and then, if you have a few programs open and close them all, it wont go back to the Today page!! It will just keep the image of the last application on the screen! Today wont even come up if you goto Start > Today. Everything else works fine though, can open any programs etc from the Start Menu :?:
Secondly, the phone signal is rubbish!!! My old SPV C600 had no problems with signal (also running WM5), this one has low signal/looses signal all the time! And after a while it will just stop searching for signal, so i have to go to settings and tell it to search again!!! I constatly have errors trying to send messages due to no signal, and cant make calls due to no signal!! Also i dont recieve texts alot aswell! Which is un-acceptable from a device that is meant to be a "mobile phone" :roll:
Any ideas to solve?! Please help me!!
Thanks
Matty
MattyPW said:
Hi,
I have an O2 XDA Exec with the latest ROM version, on an Orange Pay Monthly SIM.
<...>
Secondly, the phone signal is rubbish!!! My old SPV C600 had no problems with signal (also running WM5), this one has low signal/looses signal all the time! And after a while it will just stop searching for signal, so i have to go to settings and tell it to search again!!! I constatly have errors trying to send messages due to no signal, and cant make calls due to no signal!! Also i dont recieve texts alot aswell! Which is un-acceptable from a device that is meant to be a "mobile phone" :roll:
Any ideas to solve?! Please help me!!
Thanks
Matty
Click to expand...
Click to collapse
Hey Matt
what are your ROM versions? especially interesting in this case would be the Radio version. I think people round here have mentioned that different Radio versions have different signal reception levels.
I am using the O2 XDA 1.30 version with stock radio 1.00.09 and basically the reception's fine. There have been some comparisons on this forum as to different radio versions strengths and weaknesses.
Hi very similar to me, I switched off the 3G usage so it only uses 2G and everything was perfect again.
Now I only use 3G as and when I need it.
The problem as I see it, is that if there is a 3G signal, which in Orange's case appears to be nearly all the time the phone sticks with 3G even thought the signal strength isnt good enough fo voice, but is good enough for data (mainly because you tend not to be walking around) because of this the switching between 2G and 3G doesnt take place, hence no calls
Since swtiching of 3G my phone operations have been perfect.
I switched my Radio ROM from 1.03 (Orange Default) to 1.09 and noticed an improvement. Where I had no signal, it would flick between a signal with no bars and 1 bar with the 1.09 ROM.
I switched my Radio ROM from 1.03 (Orange Default) to 1.09 and noticed an improvement. Where I had no signal, it would flick between a signal with no bars and 1 bar with the 1.09 ROM.
As soon as i got the XDA i upgraded it to the latest O2 Rom, which has 1.09 Radio Rom... so i dont have anything to compare to!!
Any more suggestions?
turn off 3G if you dont need it.
send it back, you may have a loose connection.
are you saying a bad connection 100% of the time? ie you never have full bars?
Ok i'll try turning the 3G off (seeing as my SIM doesnt have 3G capability anyway! lol) How do i go about doing that?!
I do get full signal in places yes, its just the signal is utter crap on this phone compared to all of my past ones! Compared to an SPV C500 & C600 its rubbish!
start - settings - phone - band
change to your standard not auto. probably gsm rather than cdma.
do you get a bad reception with4 bars?
either way, I must say I have no problem with phone, but acknowledge many report poor phone performance.

Problem with radio signal

Hi,
I recently bought a used O2 Atom, and the first thing I made was to upgrade the latest ROM (Oct2006).
Sometimes it looses the GSM signal, even if the PPC is on the table in standby mode, it just tell me "No signal", the "antenna" in title bar keeps with no bars.
I'm about to downgrade to the an older ROM (20060426), but I'm unsure if it as hardware problem or a incompatible ROM.
Anybody experienced something like that?
thank you
Aldoir
Confirmed
20060426B1WWE_RS00049 (the original one) works fine
20060426B1WWE_RS00052 (Oct2006) the radio becomes unstable ;(

Bluetooth signal strength bug with my stereo's car

Hi, i write from italy and i have an annoying bug with the stereo of my car (ford fiesta) and my xiaomi mi a1.
from 2-3 months when i take my car and power on my radio the bluetooth appear works fine, the phone establishes the bluetooth connection and i see on the radio the real and correct signal strength; but after few seconds the signal strength disappears and if i try to start call with the command buttons on the radio i can't because the radio say me that i don't have signal! but if i take the phone i see that i have a good signal, and if i try to start the call with the phone works fine, i hear the voice and i can speak without problems with bluetooth system of my radio but anyway appears no signal on the display of the radio.
it's like if the phone after few seconds forgets to broadcast the correct signal strength.
someone have the same problem? how can i solve it? i tried al lot of solutions, but without good results
thank you
Hi I'm facing the same issue but on a BMW car...
I think with August security patch was the last time signal strength on Bluetooth did work properly.
Now I have to reconnect Bluetooth to get it to work for a few minutes or use the phone to start a call.
I am also looking for a solution but nothing so far :/
for me the problem started when i upgrade os from 7 to 8 (i think).
the problem is very "funny" because my wife has the same phone, same os, same patches (i bought both phones in the same moment and from the same shop) but her phone works great with the car without problem! damn!
hi, i update the post because i circumscribed the problem: if i take the car, power on the radio and power on the bluetooth of the phone, the phone connect correctly to the radio, and show me the real and correct signal strength (for example 3 of maximum of 6). but as soon as the signal downgrade or upgrade (from 3 to 2, or from 3 to 4) the signal strength on the radio disappears and reset all (zero) and i'm not able to start call with the command of the radio, i only can start call directly with the phone
i see bluetooth log, when phone connect bt to radio the phone send this info:
+CIND: 0,0,1,3,0,4,0
legend +CIND: ("call",(0,1)),("callsetup",(0-3)),("service",(0,1)),("signal",(0-5)),("roam",(0,1)),("battchg",(0-5)),("callheld",(0-2))
when the signal strength on the radio disappears and reset all (zero) the phone send this info:
+CIEV: 3,0
+CIEV: 4,0
3 = service, 0 = no service (previously was 1)
4 = signal, 0 = no signal (previously was 3)
but the phone in realty upgrade the signal strength from 3 to 4!!!!!
It's really fun and strange ... but I solved the problem: I put the SIM in slot 2 of the phone ... and now it does not make any more problems, it works perfectly! but I can not use micrsd now
The same happens to me. I have a Renault Kadjar with RLink 2
Any Solution?
Thanks
Someone says that with the november's update patch the problem disappears, not for me. i solved the problem with this method: put the sim on the second slot of the phone
Pollocedrone said:
Someone says that with the november's update patch the problem disappears, not for me. i solved the problem with this method: put the sim on the second slot of the phone
Click to expand...
Click to collapse
I've installed the November update but the problem still persists.
BYE
I solved the problem with this method: put the sim on the second slot of the phone
solved definitely with android 9 pie update!

Categories

Resources