Database Users

How to downgrade the SPL vserion?....in the normal CID

If not in super-cid, how can do it for Prohpet?...please anyone know?

SPL 2.20 ??

Hey there folks.
I tried to hardspl my prophet and now it is stuck on Bootloader.
All i can see is:
IPL 2.20.0001
SPL 2.20
Since it changed my spl from 2.20.0001 to 2.20 i can't flash anything.
Can someone tell me how do i flash my SPL to 2.20.0001 again pls?
Thanks.
Miguel
i tried to flash again, and now it wont enter directly on bootloader, and i see in a green gradient screen:
IPL 2.20.0001
SPL 2.20.0000
but when i enter bootloader it still with:
IPL 2.20.0001
SPL 2.20

How i can flash spl to polaris if spl not exist

How unbrick Polaris after task 2A ?
my polaris is dont boot on bootloader, but i can access to phone in oemsbl(dload mode).
How i can flash spl to polaris on this mode?

help hspl 2.08.0000 some have a idea please

please some have idea to recovery spl 2.08.0000 retunr to 1.42.0000 or hspl 2.08 to intall rom please help my hd2 its in tricolor show ruunbh in ridht corner spl 2.08.000 y try to uograde with ruu signed and cokking rom noting try again hspl dft, never, sspl original ruu, notingh myvender id notihg please help me dont let me this help my hd2

http://forum.xda-developers.com/showpost.php?p=5953000&postcount=23

fards said:
http://forum.xda-developers.com/showpost.php?p=5953000&postcount=23
Click to expand...
Click to collapse
Wow, that was loud and clear...

HSPL2
HSPL2
To install/uninstall this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000 SPL 1.42.HSPL
SPL 1.62.0000
SPL 1.66.0000 SPL 1.66.HSPL
SPL 2.07.0000
SPL 2.08.0000 SPL 2.08.HSPL
Other versions are not supported. (They are rare however...)
Now you can uninstall HSPL via same program, you no longer need to flash rom from SD card!
In HSPL2 you can select which version of SPL you want to install in the device.
There included 6 SPLs:
OSPL 1.42, OSPL 1.66, OSPL 2.08 (Original SPL)
HSPL 1.42, HSPL 1.66, HSPL 2.08 (Hard SPL)
Remember that some ROMs have old SPLs, for example 2.10 ROM have 2.08 SPL, 1.72 ROM have 1.66 SPL and etc!
You can install any of them using HSPL2.

Goto my flashing for noobs thread I have update my instructions for the NEW HardSPL2 by Bepe which can flash any SPL or HardSPL up or down.
Mark.

[Q] [BRICKED] i bricked my HD2 - Help

Hi,
I bricked my HTC HD2 (unbranded, EU/GSM Version).
I tried to install NAND Android, but after i installed HSPL 2.08, MAGLDR, i forgot to install newer Radio version.
- WinMo doesnt start anymore
- Bootloader shows following informations:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
- Reflash via LEOIMG.nbh on SD-Card is not possible -> Showing "Loading..." all the time, still no change after 15min.
What can i do?
I need help

Enter boot loader and flash a newer radio

if U can get bootloader it isnt bricked???flash radio from boot loader,

You say you flashed spl 2.08? In your description it says it is showing 2.08.0000. Then you don't have spl flashed right. You need to reflash spl and choose 2.08

Reflash HSPL..It suppose to have Cotulla written on it.Just enter bootloader by pressing volume down while turning it on.Connect the phone unto the PC and reflash HSPL.Don't mind activesync.Hope it help.