How unbrick Polaris after task 2A ?
my polaris is dont boot on bootloader, but i can access to phone in oemsbl(dload mode).
How i can flash spl to polaris on this mode?
Related
I tried various tools, but haven't been able yet to dump the SPL bootloader (1.16) from my HTC S710 (Vox). I used pdocread to dump the ROM raw files succesfully, but when I try to dump SPL it fails. I also tried the bootloader commands, but that failed because the phone isn't CID unlocked.
For more info about the VOX bootloader see my post here:
http://forum.xda-developers.com/showthread.php?t=319663
Anyone any ideas?
Hey there folks.
I tried to hardspl my prophet and now it is stuck on Bootloader.
All i can see is:
IPL 2.20.0001
SPL 2.20
Since it changed my spl from 2.20.0001 to 2.20 i can't flash anything.
Can someone tell me how do i flash my SPL to 2.20.0001 again pls?
Thanks.
Miguel
i tried to flash again, and now it wont enter directly on bootloader, and i see in a green gradient screen:
IPL 2.20.0001
SPL 2.20.0000
but when i enter bootloader it still with:
IPL 2.20.0001
SPL 2.20
Hello all !
I have an Artemis P3350 who was flashed without CID unlock. I discover via USB sniff that original CID is HTC__405 (italian) , but I don't find the original rom to reflash.
The unit start in boot mode tricolor the IPL version is 1.36.0001 and SPL version is 1.36.0000.
Please help me
Thank you in advance.
i think only way is unl file from imei chek it can unlock cid in bootloader mode to allow flash any other rom
i have the same proplem
ARATE10000
HTC__A07
but i still searching for rom
please some have idea to recovery spl 2.08.0000 retunr to 1.42.0000 or hspl 2.08 to intall rom please help my hd2 its in tricolor show ruunbh in ridht corner spl 2.08.000 y try to uograde with ruu signed and cokking rom noting try again hspl dft, never, sspl original ruu, notingh myvender id notihg please help me dont let me this help my hd2
http://forum.xda-developers.com/showpost.php?p=5953000&postcount=23
fards said:
http://forum.xda-developers.com/showpost.php?p=5953000&postcount=23
Click to expand...
Click to collapse
Wow, that was loud and clear...
HSPL2
HSPL2
To install/uninstall this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000 SPL 1.42.HSPL
SPL 1.62.0000
SPL 1.66.0000 SPL 1.66.HSPL
SPL 2.07.0000
SPL 2.08.0000 SPL 2.08.HSPL
Other versions are not supported. (They are rare however...)
Now you can uninstall HSPL via same program, you no longer need to flash rom from SD card!
In HSPL2 you can select which version of SPL you want to install in the device.
There included 6 SPLs:
OSPL 1.42, OSPL 1.66, OSPL 2.08 (Original SPL)
HSPL 1.42, HSPL 1.66, HSPL 2.08 (Hard SPL)
Remember that some ROMs have old SPLs, for example 2.10 ROM have 2.08 SPL, 1.72 ROM have 1.66 SPL and etc!
You can install any of them using HSPL2.
Goto my flashing for noobs thread I have update my instructions for the NEW HardSPL2 by Bepe which can flash any SPL or HardSPL up or down.
Mark.
I am a little bit confused, this thread (http://forum.xda-developers.com/showthread.php?t=756918) says:
Step 8)
Turn of the device.
Start in recovery mode by holding the home-button together with power-button for min 5 sec.
The custom recovery should start. You navigate using the trackball.
Choose "flash zip from sdcard"
choose the zip file you pushed in step 6.(should start with hboot)
Follow the instructions on the device screen. JUST DO WHAT IT TELLS YOU TO DO!!!
The device should restart a couple of times...
It's normal if you see a different recovery screen for 10-15 sec... LET IT WORK!
By all means don't interrupt it unless it has taken more then 2 min!
(IF MORE THEN 2 MIN, REMOVE BATTERY)
When it's back in recovery and is doing nothing for 15 sec then your done.
Choose "Power off".
Restart in fastboot and check that your info has changed from what you wrote down earlier
Click to expand...
Click to collapse
And the other one (http://forum.xda-developers.com/showthread.php?t=548218):
Steps
1.Create a Goldcard.
2.Copy the required sappimg.nbh/zip to the Goldcard.
3.Boot your phone while holding the VOLUME-DOWN key.
4.Press the ACTION KEY (=trackball) to start the update.
5.Wait until the update completes and press the ACTION KEY (=trackball) to reboot your phone.
6.(Upgrade to the rooted ROM of your choice).
Click to expand...
Click to collapse
Now what can i do?
can i just flash a new SPL via Recovery??
or do i have to make a goldcard and flash the update.zip via fastboot??
all my device data see below in the signature.
i have not found an answer in the search.
Well it's rather simple.
My method ( i wrote the guide you are referring to) is to change the spl only.
Using the custom recovery and a self signed spl update package you can do that without disrupting your current system or radio or recovery.
Using a goldcard and a update.zip you are possibly changing your entire system.. e.g. system, radio, recovery and spl...
And it must be HTC signed update... and you will most likely end up with a perfected spl anyway!
So choosing the method depends upon what you are trying to achieve.
For changing the spl to eng spl i highly recommend using the custom recovery part... unless you are 100% sure that flashing a update.zip using the goldcard will give you a eng spl or non-perfected spl.
PS: Only change the spl using custom recovery if you have a purpose for it. I recommend to leave it alone unless you want to change to OR(old radio) or something.
Good luck and nice question :0)
PS: If you flash eng spl, you can use my/eyegor's radioswitcher tool in my signature to change between OR and NR(new radio).
ok i will try your tool... but first i have to flash an engeneer SPL to my magic.
so i have to do a goldcard and flash the
•ROM v2.53.707.2 (Engineerings SPL v1.33.2010)
so i have a non perfekted engeneer spl.
but were are the 1.76.2007 engeneer SPL's gone?
if there is a signed 1.76.2007 i will flash this one with my recovery, wich is a lot easier than goldcard.
Or is your hboot_2007_signed.zip just a engeneer SPL (non perfekted)?
so i can use fastboot remote? And also use the Radio switcher?
thx for help
hboot = spl.
The 1.76.2007 is eng spl.
All what you need in inside the roottools and all info is in the guide.
They come in pairs... if not flashed together you can get a brick!
spl & radio pairs:
1.76.2007 - 6.35
1.33.20xx - 3.22 (xx can be the following nr: 05 or 09 or 10)
This is only for the 32A version of magic.
The 32B devices have different spl - radio combos.
Ok. Big THX.
I will flash the 1.76.2007 SPL via my amonra 1.6.2 recovery tomorrow.
I have 6.35.xx.xx already.
And later i will downgrade with Radio switcher to the old Radio.
Big THX.
Sent from my HTC Magic using XDA App