Hi all. In WM2003, I could select all contacts and transfer by bluetooth or ir. unfortunately, in WM2005, this is not the case. I know in Tofclock's new release (version 3) this problem has been solved. I would want to upgrade to this release, however, I would want a prog that allows me to select all contacts and transfer to another Hima before the upgrade. Thanx in anticipation
there is a thread about select all have you tried to programs liked to in that thread?
Related
Hi all,
I've just recently upgraded to the above ROM- everything else seems to be fine but I've just realised that the 'Settings' for BT are slightly different to my original rom version.
I can pair the JAM fine with the PC but it won't let me connect. As I look at the BT settings, I can see the following tabs: Mode, Devices and COM Ports; it's the COM ports that has changed. It's got New Outgoing Port and New Incoming Port. When i select either of these I can't assign any port number; the drop down list is blank.
P.S. I was able to connect fine via BT using my original ROM v1.00 or something.
Any help appreciated.
Thanks.
hey man
i just posted another querry regarding the card reader ...
hope u read it !!
getting back to yr problem
follow the instructions on this link and yr problem will be solved (HOPEFULLY)
http://howardforums.com/showthread.php?t=544932
I remember reading that link a while ago but I got the BT working without Pocket Tools software...
Anyway, I've tried both versions from the website but after installing either of them, the connect via bluetooth in Tools of ActiveSync is not there; just the IR. As soon as I uninstall the software it's back there.
I thought I had mastered the myth of Jam and Bluetooth- looks like back to square one!
Sorry - I'm just impatient- reinstalled and re-paired a few times and all is fine now.
Thanks for your help.
reinstalled what may i ask? im having this exact problem at the mo
Instructions from the top of my head (excuse any errors)
1) I removed the Pocket Bluetooth tools from remove programs
2) Perform soft reset and remove any existing paired devices
3) Reinstall the Bluetooth Tools (i used the an earlier version)
4) Select ActiveSync check box
5) The device should be paired
6) Go to to ActiveSync on PPC; go to tools and you should see Connect BT with ***
This should work.
Is there any way to copy all contacts from motorola v3 to jasjar (have no time to copy 1by1 600 contacts!????
i connected motorola to pc via mobilephone tools and get contacts but i cant copy them to outlook or something else!!
any ideas!?
tnx
not the answer but i need help to. how do i move my contacts from my qtek 9100 > qtek 9000 and my calender?
Check you have the latest version of the 'Mobile Phone Tools' package. The version I had (was for a V600, and was a legal registered copy) would automatically update off the web. After a few updates and reboots, my contacts would automatically synchronise with outlook (which you should have received a copy with with your universal).
If you login Dopod Internation Web Site (www.dopodasia.com), You will see a new updated which list as follow:
Item File Name / File Description Download Times
1 Dopod 818pro audio update
Installation:
Save the file to computer.
Unzip the file to any folder.
Ensure that ActiveSync is connected when mobile device is connected to computer using USB cable.
Transfer the AudioDrvPatch.cab file to mobile device.
Run the AudioDrvPatch.cab file to start installation.
After installation, please carry out a soft reset on the device.
Issue Fixed:
To improve the performance of the mobile device speaker.
I just tried installing this on my flashed-to-new-imate-jamin-rom dopod but it doesn't install, so i'm assuming it checks for ROM versions prior to installation. anyone have the same problem as i do? maybe the new imate rom already addresses this issue.
I have the same problem. Mine (818 Pro) was also flash to latest Jamin rom recently.
I have the same problem. Mine (818 Pro) was also flash to latest Jamin rom recently.
Audio Patch
If I'm not wrong....the file is already in the new I-Mate's Ext ROM
Coz I've dump it out... and compared
THX for the info.
It seems not a major fix to me.
All we concern is when will there be A2DP
Another update from Dopod International Web Site (29/3/2006)
1 Windows Mobile 5 update
Fault description/Identification:
1.The problem occur to some customers that are having
hang or slow to their device menu after second or more
sync via their PC or laptop. Please help to install the
below patch to those customers, which they are having
hang or slow problem after subsequence synchronization
with activesync.
2.Note that this will enable user to connect to activeysnc
via PC without disable the firewall issue.
Affected Models:
1.Dopod P100
2.Dopod 900
3.Dopod 838
4.Dopod 818pro
Installation steps:
1.Unzipped the patch to your computer.
2.Connect your device to computer via Activeysnc
3.Copy the cab file into the “my documents” folder
4.In the device itself, use “file explorer” to access
to the “my documents”
5.Tap on the USBSwitch_PPC.cab file and it will auto
install into the device
6.After installed, go to this path StartàProgramàUSB
Switch
7.Under the USB switch there will be 2 options, which,
please select “Serial” as this will enable user to
sync with their computer without disable the firewall.
Thanks a lot !!.....
Strange?? I went to member download but only sees manual. Any idea where do I find it?
disappointed
I screamed in joy when I saw the USB Sync patch but only ended up crying in tears after installing it. I am still faced with the "need to soft-reset after 1st ActiveSync" problem. :roll:
Anyone has this problem solved???
wyhpower said:
THX for the info.
It seems not a major fix to me.
All we concern is when will there be A2DP
Click to expand...
Click to collapse
That's right !!! I'm 100% agree with u...
When will there be a2DP profile released...
sacd54321 said:
I screamed in joy when I saw the USB Sync patch but only ended up crying in tears after installing it. I am still faced with the "need to soft-reset after 1st ActiveSync" problem. :roll:
Anyone has this problem solved???
Click to expand...
Click to collapse
Agreed... But the USB Switch is still useful, cause now syncing is instantanous, although I repair the ActiveStync instead of soft reset, cause even a Hard Reset doesn't work...
Softick released Card Export 2.15 today and recommended I try it. Sure enough, it works, even on my Mac! There is a catch however, you must enable the following option in Preferences -> Hardware:
- Use Dumb Endpoint
(Alt Init Order may also help if you're having issues, but on my Mac it made no difference either way)
I have attached the .cab since it seems only an exe is available on the website, this should be useful for other Mac users without VirtualPC.
Enjoy!
Nope, doesnt work with my T-Mobile MDA Vario with latest Qtek ROM.
Same problem as v2.12, it hangs when you get the balloon with 'Found new USB device'. I used an Acer Travelmate laptop with Windows XP Pro with latest patches.
Thanks mate...
Works like a dream, solved part of my mac/WM5 problems, now sync to entourage is the only one left...
Do not suppose you got a wondersolution to that Sprezzatura
I mean MissingSync and PocketMac does not yet.
Thanks again for the tip off...
Tubbie
molski said:
Nope, doesnt work with my T-Mobile MDA Vario with latest Qtek ROM.
Same problem as v2.12, it hangs when you get the balloon with 'Found new USB device'. I used an Acer Travelmate laptop with Windows XP Pro with latest patches.
Click to expand...
Click to collapse
I had the same issue until i read a post on the Softick forum. Softick support and another user suggested enabling a combination of "Alt init order" and "Use dumb endpoint" in Card Export Preferences (Hardware tab) as with what sprezzatura posted above.
Now i can use the software perfectly and can swap to / from ActiveSync & Card Export with no problems and no soft resets are required (except for the mandatory reset immediately after installing Card Export)
Goto: http://softick-forum.com/index.php to read what others have said.
Thanks sprezzatura for the heads up that they released the new version.
Cheers,
Chris
p.s. I have tested this and it works for me on every Dell, Toshiba & Clone PC / Laptop i have.
Wicked **** !!
v2.15 works perfect with those 2 settings. Great stuff !!
I find this solution for running ActiveSync connected thru BT via one click. I tried it on my MDA Compact and it works.
Hope it helps.
http://www.mtekk.com.au/Forums/tabid/56/postid/14926/view/topic/Default.aspx
On the Pocket PC...
1. ActiveSync / Tools / Options... / Options... (yes options twice)
2. "When cradled Enable PC sync using this connection" 'Bluetooth
3. Startup an ActiveSync connection as you normally would...
4. Now setup a shortcut to the program "windows\repllog.exe" into the Start menu. To do this
a. open up Explore in ActiveSync
b. Go into My Pocket PC
c. Go into Windows folder
d. Find repllog.exe and right click and select copy
e. Go into the Start Menu folder (within Windows folder)
f. Right click, paste shortcut - rename to something like ActiveSync Direct
Back on the Pocket PC
5. Gracefully disconnect ActiveSync.
6. Start / Settings / Buttons
7. Choose Button 4
8. Set the button assignment as ActiveSync Direct (or whatever you called it above) and click OK
9. Reset your Pocket PC and wait about 15 seconds for everything to get loaded (esp. Bluetooth which takes a little while).
10. Press the top left side button. Voila! Easy!
If you get the ActiveSync - "Port Not Available" message, it just means that Bluetooth hasn't loaded yet. Tap OK, check that Bluetooth is activated and if so, try again.
Thanks for the post. Ive been having trouble getting this to work however.
1. ActiveSync / Tools / Options... / Options... (yes options twice)
2. "When cradled Enable PC sync using this connection" 'Bluetooth
3. Startup an ActiveSync connection as you normally would...
4. Now setup a shortcut to the program "windows\repllog.exe" into the Start menu. To do this
a. open up Explore in ActiveSync
b. Go into My Pocket PC
c. Go into Windows folder
d. Find repllog.exe and right click and select copy
Click to expand...
Click to collapse
Im using WM5, and firstly i dont have the option..option menu and secondly when i try to paste repllog it tells me that the file is copy protected or something like that.
Any ideas???
Help appreciated.....
Try to use Resco File Explorer instead of M$ Explorer. When you 'right click' on Windows/repllog.exe, there is 'Send To...' -> 'Start Menu as Shortcut' option in menu.
activesync has only com1!!!!!
hello pda masters!.i try to activesync my ipaq-2490, with usb,can sync.when i try to change com to sync by bluetooth, activesync has only com1, to choose.i have soft reset, my ipaq, (Xmany times), uninstall reinstall activesync 4.01, 4.02 (Xmany times).i eraze registry anfd reinstall, nothing.have you any idea? in the past i could sync by bluetooth, because activesync had com1,com2,com......., now has only com1.please help
sorry if i post in wrong thread, but i am new, and forgive my poor english, (i am from greece)
The best
http://forum.xda-developers.com/viewtopic.php?t=49136
IMHO
help with activesync only com1
every time i install bluetooth usb stack, it uses new com79, com80, now and i cannot sync over bt like i did before.
How can i delete those comports?in device manager under advanced in com1, tells me that from com2-com80 are in used.?????
Any idea, thanks
remove your stack from PC, then delete all com ports except 1 & 2 , use buttons windows + break & install stack again!
in properties of each ports set different com for example com1 , ignore errors , delete free changed one! do so with each wrong port
THANKS A LOT! PROBLEM WITH COM79,COM80,COM81......FIXED
thanx rustoss, you are BIG! i dont unplug usb stack even.....i just ignore all notifications and change my only COM1, to com5, and thats it!.i can activesync by bt again.thanks again :lol: :lol: