I upgraded my Wizard or TMobile MDA Vario from the basic factory settings to
ROM Version 2.16.9.1WWE
ROM Date 2/6/06
RADIO Version 02.07.10
ExtROM Version 2.16.9.101
Once I did this 've lost all my signal as well as GPRS connection to the internet. Anyon out there can help or experienced such problems b4?
Tryed setting T-Mobile GPRS settings in connection but still to no avail.
And if I try to restore my backup the phone hangs at the bootloader screen and am left with no choice but to Hard Reset. Then I have to start again.
Apart from that everything else works fine.
Please help.Or let me know past experiences like above what u had to do......
Related
hey all,
I've been with the xda I from the very beginning and have always upgraded the roms to newer versions. However, a few months ago I was happy with my 2003 and didn't upgrade.
When TomTom stopped working I thought a nice new upgrade was in order and I cooked up a new rom and installed it. I played around with it, and I think (don't remember anymore) that I've touched the band tab.
Since then I have not been able to get a signal or find a network AT ALL. I have tried everything.
I couldn't install through the normal way anymore, so I resorted to SD-installing.
Spent days here with xda-tools, tried every rom version, even installed official radio stack again. Nothing helps. I have tried selecting the band at the wallaby menu. No go!!
I'm very afraid that I've messed it up.
I will boot into the OS, but no signal. With some roms it will give me the phone setup, with most it won't.
Right now I have the german t-mobile installed. It just says: no service.
Some (current) stats:
Wallaby bootloader 5.14
R 4.21.00
Protocol: 32S54
4.01.19 GER
Is my XDA I lost??
Some pointers would be great! I'm out of idea's.
Regards,
Ruurd
I've had this recently - the way around it is simple, assuming you know what band your network provider is on.
Go to the bootloader menu (soft reset and power button), and select the band on there. I had "no service" on Orange, until I selected "1800" on the menu that is, and hey presto, working phone!
I had tried that already, and it didn't work.
However, I just did it again (tried out all combinations) and yes, it did work!
pffeww!! :lol:
thnx
pls help me. I have MDA II, WM6, radio 1.17. T-mobile. When I go to place without signal, MDA starts to search for it of course. But after when I go to place with good signal, it continues with searching, can not to connect to GSM signal. I must manualy turn of and turn on the radio, or perform soft reset. I performed several times hard reset, I returned do WM5, I tried radio 1.08, 1.17, 1.19. Problem still persist - for 6 months. I´m often in places without signal, so it is a big problem for me. is it hardware problem? Thank you. Peter
Try radio 1.08
I try all of them the only one that works well on my hima is 1.8
you are using 6.1 19209 build right?
rictec
Hi everyone !
I'm new here (in the Hermes forums). I have a prophet, but now I bought a Hermes.
The guy who originally owned (the phone is used) told me that when he flashed it, he had this problem that I'm going to tell you now, so I really don't know what could had happened to him during the flashing process.
The problem I have is that the Hermes works very well, the Wifi, bluetooth, card reader, everything EXCEPT the PHONE, let's say, the GSM interface.
When I turn it on, everything works well, (I DON'T SEE THE 'NO GSM' THING), and I have the antenna icon with the exclamation mark (!) next to it. When I go into there, in the phone configuration, if I try to select a network manually, after a few seconds it says that it can't retrieve the list of networks, that I have to try later. If I go to the band configuration, and I put it to use only gsm, for example, after a few seconds it says that it can't change the configuration, that I have to try later.
I tryed with different sims, of different companies.
When I bought the phone, it had a spanish Schap's 3.54b, and the Olipro 2.30 spl.
I tryed hard resetting, but nothing. I flashed the original shipped rom WM6.1 WWE, downloaded from here, and nothing. NOTE: I had to flash with the sd method because if I try to do it with the computer, I have the 260 error (or 262 i dont remember).
I changed the HARDSPL to theOlipro 2.10, hard reseted again, and still de same thing.
The IPL is 1.04.
NOTE: When I flashed the WWE rom, I flashed the .nbf file inside, but the SPL.nbf I didn't flashed.
What can I do? ANY SUGGESTIONS ?
I read a lot of things in the forums and in the wiki, but nothing. I've just finished downloading the Schaps WM6 4.31, now i will try to flash it with the sd thing.
Also, I have the protocol 32.80.7020.20H. I've read it somewhere but I don't remember what the protocol is. I HAVEN'T CHANGED THIS since I bought it, could that be my problem?
Currently, I have this (before flashing Schaps):
-Device Information:
ROM: 3.54.255.3
ROM DATE: 07/05/07
Radio Version: 1.47.00.10
Protocol: 32.80.7020.20H
ExtROM: 3.54.255.104
-In the bootloader:
IPL-1.04
SPL-2.10.Olipro
Maybe the antenna is no good...
1st thing I'd try though is to flash a new radio on (use sd card method). Worst that can happen is "No GSM" but as you can't use it anyway theres no harm in trying...
Check what radio rom you have 1st though so you can flash back if need be.
If you can get a "broken" Hermes (same model is best) then you can replace parts and see if that helps. I did this and found one of the parts that was causing a problem with my jasjam was the flywheel.
Do a search for the HTC service manual or go to Mike Channons web site to get heaps of manuals and tutorials...
Cheers...
The phone is near new, let's say, it was used for less than a month, he had it a week or two and then flashed it and had that problem, so I don't think that it's and antenna problem, and if it hadn't antenna, it has some signal of some kind.
Any other ideas?
I changed the radio when i Flashed the WWE version. I'm now downloading this one http://forum.xda-developers.com/showthread.php?t=298520
Any suggestions? is there any problem using the AKU 3 or something?
Thanks =)
Hey,
What about the protocol version? can I change it? how? cause I flashed it and the radio changed but the protocol is the same.
I'll try to flash it with windows vista, to see if I can, because XP won't let my.. olnly SD flashing
Ok, I Installed a cingular flash, now I've protocol 32.67.7020.10H. Radio:1.34.00.10 and still having the same problem. I don't know what to do now... any suggestions? !
thanks
PD: also tryed putting a little piece of paper over the sim but it didn't changed anything
PD2: The error I get when I go to Phone Settings -> Netowrk, and I choose "Manual" is: "Unable to read setting from the netowrk. Try viewing settings later, or disconnect data connection and try again.
I need help! My signal on the HTC HD2 T-Mobile USA signal is not working?! It worked the first month just perfectly, but now it's not working. It's been like this for around 3 months now, and I really want it to work! And i've tried reseting, updating the ROM, changing SIM card and put in a totally new SIM card and it's not working! But when I tried my sisters SIM card and I got signal but It didn't work to call? And my mom's SIM card I didn't have any connection..? So please please help me.
Thanks for help, Rasmus
Seems like either the Radio ROM version is not good for your phone or youmesstup with settings. What ROM version and what Radio ROM version do you have?
Thanks for the replay! My ROM version is 2.13.531.1 (90963) WWE
and my Radio Version is 2.10.50.26
Rasmus
Grace Period
Sound like you need to call T-Mobile and get it replaced.
Ooo But I have a unlocked my phone, and I bought it from eBay... So can it be a antenna problem?
I have a i-mate k-jam and I have a problem with the signal. He was brought from England and used in romania.work some time after that I instal a piece of software that changes the language from the menu, unknowing that it will lost the signal. after I put the program asked me to do restart, it restarted and then load Windows Mobile and then I get white screen. i resoft it and now I can't find signal, always looking for it but can not find signal. please help me... thanks
deea92 said:
I have a i-mate k-jam and I have a problem with the signal. He was brought from England and used in romania.work some time after that I instal a piece of software that changes the language from the menu, unknowing that it will lost the signal. after I put the program asked me to do restart, it restarted and then load Windows Mobile and then I get white screen. i resoft it and now I can't find signal, always looking for it but can not find signal. please help me... thanks
Click to expand...
Click to collapse
While this isn't the Wizard forums, I can tell you this from my many moons of experience...you bricked your radio ROM. Goto the Wizard section and look on how to reflash the radio using SoftSPL.
rassy9515 said:
Ooo But I have a unlocked my phone, and I bought it from eBay... So can it be a antenna problem?
Click to expand...
Click to collapse
Did you try going into your connections settings, manage existing settings, then going through the prompts? Sounds to me that you might have jacked something up there. I take it you can not make calls or anything? Like you have no phone connectivity?
Need some more information. First what band is the phone set to? First do a HARD RESET of the phone to get everything cleared out and set to the base settings. You should have a signal if the radio is working. What country are you in/network? Take out the SD card and see if it makes any difference.
What does the signal indicator show when the phone is on? When the phone was working did it drop calls. Did it "hunt" for a signal then find one then start hunting again? This indicates a failing radio - if this is the case the phone is never going work properly - it will only get worse and flashing a rom will not make it come back - its a chip on the motherboard and its bad.
You said you flashed a new rom - did you have any problems flashing? Did it complete? If it did without issues the radio is more than likely OK. Generally when a radio goes bad you can't flash past about 11% of completion.
From personal experience on my now sold TYTN - the radio started to go - was able to flash. Then it got really bad - no more flashing. Would freeze during the ROM update and hang up.
=> Bootloaders:
IPL: 3.08 (G3 device)
SPL: 3.08 (G3 device)
Built on Nov 13 2006 at 14:02:18
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: Unknown
ROM: Unknown
Registry AKU: .1.5.0
Radio: 02.61.11
Protocol: 4.1.13.28
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
I'm from romania. Sometimes the phone search and find signal: RO Vodafone, but if I call someone I wait 10-20 seconds and it says failled.The problem is that the phone works but since I tried to put that program my phone didn't find the signal.
deea92 said:
=> Bootloaders:
IPL: 3.08 (G3 device)
SPL: 3.08 (G3 device)
Built on Nov 13 2006 at 14:02:18
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: Unknown
ROM: Unknown
Registry AKU: .1.5.0
Radio: 02.61.11
Protocol: 4.1.13.28
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
I'm from romania. Sometimes the phone search and find signal: RO Vodafone, but if I call someone I wait 10-20 seconds and it says failled.The problem is that the phone works but since I tried to put that program my phone didn't find the signal.
Click to expand...
Click to collapse
ashasaur said:
While this isn't the Wizard forums, I can tell you this from my many moons of experience...you bricked your radio ROM. Goto the Wizard section and look on how to reflash the radio using SoftSPL.
Click to expand...
Click to collapse
deea92, please go to the Wizard forums like ashasaur recommended before. You're only going to confuse users by posting here in the LEO forum.
hello guys, I have a HTC Touch HD and I have a problem with wifi networks .. I flashed the 'hardspl 1:56 el' axlor 6.1 as in the guide, but I'm not the most research of networks (not see any network) I tried to put all the radios, but nothing ... not even manually entering the keys wpa or freeing up the network I can not connect ... I tried to restore everything, but the problem persists ... can anyone give me a hand?
i have the same issue !!!!!! any one help please
My wifi connects to networks but the phone doesn`t browse the internet.I`m sure it has something to do with some setings but I don`t know what.Can anyone help?
without further information it is impossible to help you. what kind of network is it, how is it encrypted? what rom/radio rom are you running? is it your private network? do you have the key for it? what are your settings that you suspect of making it not work for you?
It`s a student public network on my faculty.It`s open for everyone to use.And they use it without any "encription" or password.
Bought my phone used.I guess it was all set to work, but I installed some rubish I couldn`t delete...rest of it you can predict.
I returned my phone to factory setings, and since then wifi doesn`t work.Everything else works.
OS 5.2.21855(21855.5.0.85)
manila version 2.5.19211619.0
Radio version 1.09.25.14
Thank you very much in advance!
ok, that is something to work with. your rom is not a shipped one, and from the version number, i can't tell, who cooked it and how old it is. however, it might be a common bug of that rom that wi-fi doesn't work properly. also, your radio is fairly uncommon, most people these days use the latest radio 1.17.29, which can be found on the forum. remember to perform a hard reset after flashing another rom or radio rom. in general, one can assume, that, once you flashed a shipped rom and the latest radio, the software on the phone is as it should be, and if wi-fi doesn't work then, it might actually be physically broken.