pls help me. I have MDA II, WM6, radio 1.17. T-mobile. When I go to place without signal, MDA starts to search for it of course. But after when I go to place with good signal, it continues with searching, can not to connect to GSM signal. I must manualy turn of and turn on the radio, or perform soft reset. I performed several times hard reset, I returned do WM5, I tried radio 1.08, 1.17, 1.19. Problem still persist - for 6 months. I´m often in places without signal, so it is a big problem for me. is it hardware problem? Thank you. Peter
Try radio 1.08
I try all of them the only one that works well on my hima is 1.8
you are using 6.1 19209 build right?
rictec
Related
hey all,
I've been with the xda I from the very beginning and have always upgraded the roms to newer versions. However, a few months ago I was happy with my 2003 and didn't upgrade.
When TomTom stopped working I thought a nice new upgrade was in order and I cooked up a new rom and installed it. I played around with it, and I think (don't remember anymore) that I've touched the band tab.
Since then I have not been able to get a signal or find a network AT ALL. I have tried everything.
I couldn't install through the normal way anymore, so I resorted to SD-installing.
Spent days here with xda-tools, tried every rom version, even installed official radio stack again. Nothing helps. I have tried selecting the band at the wallaby menu. No go!!
I'm very afraid that I've messed it up.
I will boot into the OS, but no signal. With some roms it will give me the phone setup, with most it won't.
Right now I have the german t-mobile installed. It just says: no service.
Some (current) stats:
Wallaby bootloader 5.14
R 4.21.00
Protocol: 32S54
4.01.19 GER
Is my XDA I lost??
Some pointers would be great! I'm out of idea's.
Regards,
Ruurd
I've had this recently - the way around it is simple, assuming you know what band your network provider is on.
Go to the bootloader menu (soft reset and power button), and select the band on there. I had "no service" on Orange, until I selected "1800" on the menu that is, and hey presto, working phone!
I had tried that already, and it didn't work.
However, I just did it again (tried out all combinations) and yes, it did work!
pffeww!! :lol:
thnx
I upgraded my Wizard or TMobile MDA Vario from the basic factory settings to
ROM Version 2.16.9.1WWE
ROM Date 2/6/06
RADIO Version 02.07.10
ExtROM Version 2.16.9.101
Once I did this 've lost all my signal as well as GPRS connection to the internet. Anyon out there can help or experienced such problems b4?
Tryed setting T-Mobile GPRS settings in connection but still to no avail.
And if I try to restore my backup the phone hangs at the bootloader screen and am left with no choice but to Hard Reset. Then I have to start again.
Apart from that everything else works fine.
Please help.Or let me know past experiences like above what u had to do......
Hi everyone !
I'm new here (in the Hermes forums). I have a prophet, but now I bought a Hermes.
The guy who originally owned (the phone is used) told me that when he flashed it, he had this problem that I'm going to tell you now, so I really don't know what could had happened to him during the flashing process.
The problem I have is that the Hermes works very well, the Wifi, bluetooth, card reader, everything EXCEPT the PHONE, let's say, the GSM interface.
When I turn it on, everything works well, (I DON'T SEE THE 'NO GSM' THING), and I have the antenna icon with the exclamation mark (!) next to it. When I go into there, in the phone configuration, if I try to select a network manually, after a few seconds it says that it can't retrieve the list of networks, that I have to try later. If I go to the band configuration, and I put it to use only gsm, for example, after a few seconds it says that it can't change the configuration, that I have to try later.
I tryed with different sims, of different companies.
When I bought the phone, it had a spanish Schap's 3.54b, and the Olipro 2.30 spl.
I tryed hard resetting, but nothing. I flashed the original shipped rom WM6.1 WWE, downloaded from here, and nothing. NOTE: I had to flash with the sd method because if I try to do it with the computer, I have the 260 error (or 262 i dont remember).
I changed the HARDSPL to theOlipro 2.10, hard reseted again, and still de same thing.
The IPL is 1.04.
NOTE: When I flashed the WWE rom, I flashed the .nbf file inside, but the SPL.nbf I didn't flashed.
What can I do? ANY SUGGESTIONS ?
I read a lot of things in the forums and in the wiki, but nothing. I've just finished downloading the Schaps WM6 4.31, now i will try to flash it with the sd thing.
Also, I have the protocol 32.80.7020.20H. I've read it somewhere but I don't remember what the protocol is. I HAVEN'T CHANGED THIS since I bought it, could that be my problem?
Currently, I have this (before flashing Schaps):
-Device Information:
ROM: 3.54.255.3
ROM DATE: 07/05/07
Radio Version: 1.47.00.10
Protocol: 32.80.7020.20H
ExtROM: 3.54.255.104
-In the bootloader:
IPL-1.04
SPL-2.10.Olipro
Maybe the antenna is no good...
1st thing I'd try though is to flash a new radio on (use sd card method). Worst that can happen is "No GSM" but as you can't use it anyway theres no harm in trying...
Check what radio rom you have 1st though so you can flash back if need be.
If you can get a "broken" Hermes (same model is best) then you can replace parts and see if that helps. I did this and found one of the parts that was causing a problem with my jasjam was the flywheel.
Do a search for the HTC service manual or go to Mike Channons web site to get heaps of manuals and tutorials...
Cheers...
The phone is near new, let's say, it was used for less than a month, he had it a week or two and then flashed it and had that problem, so I don't think that it's and antenna problem, and if it hadn't antenna, it has some signal of some kind.
Any other ideas?
I changed the radio when i Flashed the WWE version. I'm now downloading this one http://forum.xda-developers.com/showthread.php?t=298520
Any suggestions? is there any problem using the AKU 3 or something?
Thanks =)
Hey,
What about the protocol version? can I change it? how? cause I flashed it and the radio changed but the protocol is the same.
I'll try to flash it with windows vista, to see if I can, because XP won't let my.. olnly SD flashing
Ok, I Installed a cingular flash, now I've protocol 32.67.7020.10H. Radio:1.34.00.10 and still having the same problem. I don't know what to do now... any suggestions? !
thanks
PD: also tryed putting a little piece of paper over the sim but it didn't changed anything
PD2: The error I get when I go to Phone Settings -> Netowrk, and I choose "Manual" is: "Unable to read setting from the netowrk. Try viewing settings later, or disconnect data connection and try again.
Hello, i bought a new phone with a problem(the seller told me that speaker dont work, well this is not a problem i can use the external speaker), this is almost new, i discover that i cant init wifi and bluetooth.
I test installing 2 roms, WM6.1 official HTC and WM Amina (i think is the name). but i cant recover this functions.
When im on comms manager click on wifi or bluetooth and appears like thinking and few secs later its off.
I notify that when i reset my phone and open comms manager bluetooth is enabled but i think is not working only enable.
Anyone can help me to fix it?
im very worried about
Thanks,
Albert
Radio Version?
What Radio version are you using?
Rom: m-amine
Radio: 1.59.42.15
try flashing RADIO rom 1.59.42.23 and make a hardrest after each ROM flashing.
whats change when i install a new radio?
and how i can install only the radio?
I generally install the rom with radio inside, how to install only the radio?
Ok i install the radio .23 but nothing bt and wifi doenst work
changing Touch Cruise motherboard
Bonjour,
unfortunately I had the same problem and others like camera weird colors pictures etc.
And after radio roms testing hard reset and so and so, I had to give my telephone to the repair service (under garantee), they changed the motherboard and now it's OK.
I'am affraid your phone has the same problem if the radio rom flashing does not resolve your problem.
cyklix
Hi,
I have an Orange M3100 which has been flashed to WM6.5 and works fine, other than on boot up it intermittently gives NO GSM errors - despite this, the phone works fine, it is almost like the radio doesn't initialise quick enough. Anyway, I decided to unlock this phone and the unlocker v3a software bricked it, so I reflashed and all was well (but still locked). I have since tried flashing a variety of radio roms using my pc in an attempt to get rid of this error, using SD card method but all of them hang/fail when it comes to updating the GSM rom. I'm currently running the 1.47 radio rom.
Does anyone have any ideas of what I can do? I have tried to revert back to the original Orange rom to no avail (can't flash GSM), have tried the trick with mtty and erasing certain areas of rom to no avail, is it screwed? I just can't understand why the phone works fine, yet I can't reprogram the radio rom!
Cheers
Hellraiser.........>
hermes has two cpus, one is for multimedia,the other is for gsm(radio),if the on gsm problem occurs sometimes, it must be hardware problem,dad sodering,if the problem is always no gsm ,then it software problem, hope it could help you. i think yours is hardware,