Anyone using or know of an adapter that doesn't disable the Prophet's internal microphone? I used to be able to use my Jam as a car speakerphone through my car's speakers, but after upgrading to the Jamin, the PocetPCTech adapter I use seems to disable the mic and now I've lost a very useful "feature" of my phone.
Thnx.
How does your 3.5mm adapter looks like. Does it have a 3 sections or 4 sections?
I doubt your previos adapter doesn't disable your mic, as it should do that (e.g. when using a handsfree, it disable your mic and have a mic on the handsfree instead). I think most probably because your (previous - that doesn't disable the mic) adapter has a built in mic. Can you double check on that.
On my previous phone, SPV C500 I could use a normal 2.5mm to 3.5mm stereo adapter to play music through my car stereo and also use as a hands free kit as mentioned above. Talking in a slightly raised voice the caller could hear me using the phones built in mic.
I have noticed on my MDA Compact II that it sometimes works but other times doesn't.
It was a very cheap and simple hands free kit.
Here is a link to a picture of the adapter I am using. It has 3 rings on the adapter, so I guess divides it into 4 sections.
http://www.pocketpctechs.com/images/items/PPCPADPT11-15.jpg
On the Jam, it does not disable the internal mic. How I had the Jam set up before was a cassette tape adapter connected to the adapter, which plugged into my Jam. There was no handsfree mic, so the mic that I was using for phone calls was the internal mic.
Don't know about one that doesn't disable the mic, but this one has a mic:
http://www.doml.com/productdec.asp?pid=2149&model=818p&modeln=i-Mate JAMin
vudu said:
Here is a link to a picture of the adapter I am using. It has 3 rings on the adapter, so I guess divides it into 4 sections.
http://www.pocketpctechs.com/images/items/PPCPADPT11-15.jpg
On the Jam, it does not disable the internal mic. How I had the Jam set up before was a cassette tape adapter connected to the adapter, which plugged into my Jam. There was no handsfree mic, so the mic that I was using for phone calls was the internal mic.
Click to expand...
Click to collapse
It is a 4 section one. The 3 sections one looks like http://forum.xda-developers.com/viewtopic.php?t=43121&highlight=
Does the Jam one looks like the one that you shown above? If that's the case, it is sure that it doesn't have a mic. Probably it is the Jam's short cut of not making the mic disable. . I guess. My suggestion is, get one with a mic then
I've got this one, it works (with mic)
http://www.hkhightechpro.com/images/Ebay_photo/Easybusinesshk/O2 XDA/AdapterO2XDA1.jpg
Related
I'm looking for replacement for Magician's (wired) headset coz I think the one that comes with it sucks (low audio quality).
Anyone can suggest good alternatives with good MP3 quality (enough bass,...) and also as the phone's handsfree.
Thanks a lot.
If you are handy with a soldering iron, cut off that stupid pair of earbuds and solder on your favorite headset (that's what I did) or you can buy 3rd party adapters. If you solder on new headphones, don't forget to get some of that really cool heat shrink stuff to put over the wires, it turns out very professional looking and very strong.
Hmm...nice idea.
Unfortunately i'm not good at soldering.
So it seems i'm stuck with alternative to find a good earphone+hansfree combo....
SOny Ericsson p900 headset
5x times sound quality, + only one with a microphone that fits the 2.5mm plug. I searched long and hard to get this answer as i cannot solder too
this headset is not a stereo one, rigth ?
There are some adapters that have a built in mic and you plug the 3.5 headhones of your choice into it. There is also a small adapter that is just for audio 2.5-3.5. It is true that the Sony P800-900 headsets are compatible with the Jam. Unfortunately I have yet to hear original earphones that are acceptable to me. I can't remember where I bought it, but the adapter with a built-in mic and 3.5 headphone jack is probably what you are looking for. I use one in my car. Maybe somone has a link for you?
Link herehttp://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT11
Link herehttp://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT11
Click to expand...
Click to collapse
But in this case, is there any high quality 3.5mm earphone that also work as handsfree for the Jam?
This solution uses the internal mic of the PPC Phone so you can use any high quality headset from your local hi-fi store.
Can you confirm that this doesn't mess up the stereo or do anything else weird?
I found it! This is the adapter that I bought for my Sony P800 years ago(works with Magician). You can use it to plug into your home stereo, favorite headphones and it even has a volume control. Mainly I use it in my car. I use it to plug my Jam into my car stereo and sometimes I use it to plug in the earbud for one ear wired headset communication. ENJOY!
http://pc-mobile.net/sp8aa.htm
I have that. I don't like it too much since it feels very fragile (including the thin wire) and the fact that it isn't a simple straight wire means it snga everywhere.
I only use that adapter in the car. It is good for people that can't make their own headset by soldering. I made a custom headset from Koss headphones and a Sony handsfree. That baby sounds really good, and I'm picky about sound quality.
Does the mic work? Can you accept and end calls using the button?
Thanks,
K
Yes, the above adapter works exactly as the original handsfree headset (+ volume control) except that you have to plug in a normal 3.5 plug stereo headphones. If there are other models out there without the reel thingy, I haven't found it.
Hi all
I have a MDA compact which I wish to connect to my car stereo as a handsfree unit. I have an auxiliary input for my stereo.
Is it possible just to purchase a 2.5 to 3.5mm lead for this? I have a gut feeling the mic won't work - please help? Is it possible to buy such a lead with a built in mic?
Thanks
Carl
Hi, I used to have a XDAII which I connected to the auxillary port on my car stereo, just like you suggest. It worked perfectly. When using the phone, the caller's voice woudl come out of the car speakers and the mic was powerful enough to pick up my voice even though the unit was mounted on my windscreen.
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact. Sorry couldn't offer more advice on your particular device, but I hope my experiences help.
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
carlreader said:
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
Click to expand...
Click to collapse
Yes. 8)
OK - did some work on this.
I decided to cut the earplugs off of the supplied headset, and attach a 3.5mm socket.
I now have a custom XDA mini lead
All works, however volume from car stereo speakers is extremely low. Any ideas? (Yes, I have checked car volume, phone volume and headphone volume!)
Cheers
Carl
jackleung said:
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
Click to expand...
Click to collapse
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
I found my mic was cancelled with the Mini, hence the custom cable.
hope this helps!
monster said:
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
Click to expand...
Click to collapse
I think my adapter is just a standard 2.5mm to 3.5mm converter. I tried 2 different adapter (one from Radio shack and the other one from ebay: http://cgi.ebay.com/USB-CABLE-headp...ryZ15040QQssPageNameZWD1VQQrdZ1QQcmdZViewItem)
Both are working for me (I will try again today and confirm U tomorrow), therefore I think yr problem is in the exec hardware itself.
To Carl,
Yr setup will not work since yr supplied headset adapter has at least 4 connection on the plug compare to 3 on the standard one. The extra connection is for the mic. If U cut the wire like this:
<---- X --- mic+volumn control ------ ear plugs
Then U can no longer use the mic w/ the custom wire. But if U:
<------- mic+volumn control -- X ---- ear plugs
then the mic on yr mic+volumn control will pick up the voice
hi jackleung
Thanks for the reply - the lead was cut after the mic but before the earphones.
This was because a standard lead with a 2.5 / 3.5mm adaptor didnt work.
My only issue now is the low volume!
Cheers
Carl
I tried it on my Imate Jam again. My mic on the Jam still works (eg: Voice Command via Cyberon Voice Dial. So do phone conversation) even I use my 2.5mm/3.5mm adapter to connection it to my car stereo.
Hi,
I did the same for me and a friend of mine with a Univer..er - Jasjar and connected this to an FM transmitter - We have excellent sound quality, volume and the you can still answer calls by pressing the Mic Button
Frikkie
(If you are gonna be late - dont rush, else someone else and YOU will be cross)
check connections?
I have done exactly what you did, put a 3.5mm socket on the end of the included handsfree cable.. volume is fine, and i regularly connect it to the aux in the car, and multiple sets of headphone/speakers...
The best suggestion to your volume problem is to try again.. i know i had issue with the stereo channels getting screwed up (and even combined at one point) and it was just trial and error getting the connections clean..
You have to ensure that both the shaft and tip connectors on the socket are grounded to the shared ground on the circuit board.. otherwise the audio will probably be less than perfect.. check for dodgy soldering/connection.. coz i can assure you that your theory does work!
Dan
There is another topic on this here.
The person from there uses:
http://www.expansys-usa.com/product.asp?code=PPCPADPT02
which has two 3.5mm plugs.
Description: It has a 2.5mm plug at one end (this plugs into the PocketPC) and two 3.5mm sockets at the other end (into which you plug your 3.5mm headset or headphones).
My question was: could I put a standard 3.5 car kit mic into this 3.5 headset jack (the one with the mic)? Would the mic work if I plug it into a headset jack?
I assume the other one (headphones = stereo only) I will plug it directly into my car auxiliary via a 3.5mm to RCA cable, right?
hi, i was wondering if there is a wat to connect my wizard to my car stereo and play mp3's from wy wizard stored on memory card but play them using my car speakers setting my radio to AUX ? is is possible..i hope you all got what i mean cos i am not sure myself if i know what i mean cheers, cudo
I use a Sony Adapter Casette. Just plug it in the Universal and play the casette on your car and it will work fine. There are other options too like wireless stuff. But I prefer this method better, at least I don't have to worry about signal being obscured.
and what if i dont have casettee i got only cd ??
If you only have CD and no casette, you only either use BT or FM transmitter.
I used to use casette adapter but now I have a car stereo with AUX input.
If you also want to be able to receive calls you would need to have an adapter with a mic as a normal audio plug when plugged into the Universal will disable the internal mic and only carry over the output audio.
See this link, we discuss about the correct adapter for Universal in the lower part. I should receive one in this week and will post the result later once I verify its working fine.
http://forum.xda-developers.com/viewtopic.php?t=54823
Which PPC are you using, Wizard or Universal? You subject title is about Universal but your message body is asking about Wizard.
They have different size of audio plugs.
sorry i wasnt very specific...i am asking about unicersal, i am using both of them hence the mistake. sorry about that
Good news. I received the PQTAA from PC-Mobile and it works with the Universal!
I have tested all functions with my Universal:
- Stereo audio output is carried perfectly to the car stereo, no noise whatsoever.
- Microphone is working great, my voice can be heard clearly.
- The call receive button on the unit is working ok too to receive/pick up incoming call.
This is a great audio adapter (in addition to the fact its a handsfree unit).
I find its a lot better way to connect the Universal to the car audio system rather than using other method like BT.
As most car mounting solutions do not include audio adapter to connect the Universal to the car audio system, the PQTAA is a perfect solution.
If you have a cassete player, you can combine it with the casette adapter. If you have an AUX input in your car stereo, thats the best.
For pictures, see this discussion:
http://forum.xda-developers.com/viewtopic.php?t=54823
One of the features I miss of my Hero that my Nokia N95-8GB had was the ability to plug in a standard pair of headphones (or 3.5mm audio out cable) and use the built in microphone to make hands free calls.
I use the phone a lot in my car whilst driving to and from work to listen to music and would love for it to recognise the standard cable (which it does - indicated by a pair of headphones rather than the headphones/mic icon used to indicate the presence of the hands-free headphones) and be able to automatically answer inbound calls using the internal microphone.
Is there an app for this kind of thing - I'm guessing it is something that is/can be controlled by software?
have you tried it actually? because i use my ipod headphones quite often and it works as expected, sound from headphones and i hold phone closely to my mouth as its using internal mic.
Really not sure what you are looking for. If you plug the standard HTC headphones in using the jack on the top then you can use of the built in mike they have to answer calls.
Or have I missed something?
I've also done exactly what you're asking with my car. I've had my phone in a car holder w/ an audio cable from the Hero's headphone jack to my car's line in jack. I was able to answer calls just fine, and the person on the other end could hear me. (And it was just a standard stereo audio cable, my car doesn't have any sort of built in mic)
bjg222 said:
I've also done exactly what you're asking with my car. I've had my phone in a car holder w/ an audio cable from the Hero's headphone jack to my car's line in jack. I was able to answer calls just fine, and the person on the other end could hear me. (And it was just a standard stereo audio cable, my car doesn't have any sort of built in mic)
Click to expand...
Click to collapse
im doing the same thing but people on the other end are complaining about an echo of thir voice. I figure its coming from thier voice being picked up by the internal mic. Anybody have any ideas? how can i cut the internal mic while theyare talking. would a cheap wired headset work using its external mic? i could cut the headphones off and splice it into the line in.
I have had my G2 since late September and quickly found out by accident that it does use the internal mic when a headphone is plugged in.
Mine is a simple adaptor from the 3.5 mm into the RCA in my car. If I have the volume up too high, it echoes. If I have the volume down low, I can have a perfect handsfree conversation.
With the headphones I have had problems. In the car, I have the phone laying down and the mic side up. If I am holding the phone in my hand, I have no problems. Shirt pocket, ok. Pants pocket, no way.
Hi everyone,
I'm wondering if it's possible to have built-in mic active when a cable is plugged into the 3.5 mmjack. For example...I connect the hd2 to the car stereo and if I get a call i need to disconnect the cable because the built-in mic is inactive.
venz111 said:
Hi everyone,
I'm wondering if it's possible to have built-in mic active when a cable is plugged into the 3.5 mmjack. For example...I connect the hd2 to the car stereo and if I get a call i need to disconnect the cable because the built-in mic is inactive.
Click to expand...
Click to collapse
Mine works when I plug mine into my car with a standard 3.5mm stereo cable.
Does the cable you're using have 1 or 2 black stripes on the plug?
i agree, this feature was one of the most pleasant surprises for me with the HD2.
on my kaiser, i used a special HTC headset that had an inline microphone (which i snapped on to my shirt collar) and this headset allowed me to plug in a standard 3.5mm stereo jack, which my car audio was plugged in to. this was the best solution at the time for the kaiser that allowed me to keep all cables connected and be able to use the car's speakers and have a working microphone all at once.
but with the HD2...WOW!!! i plugged in my car stereo's 3.5mm stereo jack straight into the HD2 and put on some music and started driving. a call came in while driving and i just pressed answer because i was still used to my kaiser set up (i had owned the HD2 for less than 24 hours at this point so wasn't quite used to it yet).
i started hearing the other party and i started speaking. and the other party could hear me. and THEN it hit me...i was like, holy hell!!!...what am i speaking in to? how come the other party can hear me?
great features, great phone!
rp-x1 said:
Mine works when I plug mine into my car with a standard 3.5mm stereo cable.
Does the cable you're using have 1 or 2 black stripes on the plug?
Click to expand...
Click to collapse
I think it has two stripes since it's a stereo jack. I'm not sure but i think initialy I was able to speak in the car with the leo plugged into the stereo. May be some app I've installed later changed something?!?
the built in mic will stay active unless u have a cable with 4 connections (3 rings on the plug), a regular stereo cable has 2 rings. I've been using this type of setup for a couple of years with my previous phone, a.k.a. iphone. The mic is pretty sensitive and can pick up your voice rather well. I have my hd2 clipped to my sunvisor for easy access and routed the wiring inside the windshield molding down under the dashboard to the stereo and it works pretty good.
http://www.youtube.com/watch?v=osLFRLL7qOw