Been doing this for a while with other units and never had a problem before.
but recently i have been given an m600 to work with and want to dump the rom before messing around with it. At present all i get is invalid command when i use d2s.
the phone has the following
rom 2.10.1.22 wwe
rom date 2/16/06
radio 02.07.20
protocol 413.1.03
extrom 2.10.1.107
ANYONE GOT ANY IDEAS
So I can't! I tried to dump my Jamin, but in romupdate window appear "INVALID COMMAND"! I try "task 32", but...nothing...Any ideas?
JAMin - d2s unknown command
Same with me..waiting for an answer - looking for other terminal apps Do anyone btw have some docs about the HTC terminal program/commands and other stuff it could be for ?
Related
Hi guys,
Hoping someone can help with this problem. I tried backing up CE+Boot to an SD this evening and then reading it via XDArit. XDArit seems to locate the SD card but when I try and save the images to file I get the following errors:
Failed device: 4
Did not find correct flash signature, aborting!
Any ideas?
My XDA is a PW10A1 running ROM 3.17.03 & Radio 4.21.00
Cheers, Malachi
what matters is your bootloader version. I know of 4 different versions: 5.14, 5.15, 5.17, 5.22.
with 5.17 being the difficult one, you need the wallaby-patch-loader to disable the flash-key protection that it uses.
I have the same problem then I can't backup the Rom image. Anyone can help?
My XDA - PW10A1. CE 3.16.10 CHT (Chinese Rom) and Radio stack 4.21.00
Cheers!
ok, i just got a new mda2 from t-mobile (460eur for a non-simlocked version is a good deal, i think)...
of course, its in german so i wanted to flash it to english (like i did on my old mda1)...
but...there are some strange things...
of course, model is ph10a, but:
ROM version says 1.03.00 GER (date 09/25/03)
Radio version is 1.05.12
Protocol version is 1337.12
i've tried placing a new rom on a sd card, but cannot get it to boot - i simply cannot get bootloader to start...
and i've tried adaptrom, but that one (once the file signatures are ok) always complains with error: GetDeviceData - Unspeficied error
(if the mda2 is not properly connected, it says so - this error is after the usb connection is perfect)
any suggestions? i'm running out of ideas...
Hi, I am very new to this hardware , I surfed this forum for two days tried to upgrade using Special Edition 1.2 ROM but when I run the program, it gives me following error and nothing happen.
ERROR: GetConnectionType - An existing connection was forcibly close remote host
Error getting connectiontype.
I used different computes another laptop but same problem, please HELP.
I am using Activesync 3.7 as 3.5 does not get connected.
Here is my phone detail
Hardware PW10B1
ROM Version 4.01.16 ENG
ROM date : 02/04/04
Radio Version : 6.25.02
Protocol Version : 32464
ROM 4.01.16 does not allow downgrading via Exe-Method.
You have to flash your device via SD-Card and Bootloader.
Stefan
Hello, but I thought some of the users in this forum did unlock without using SD card, may be I am wrong.
One more request what type of SD card XDA takes, either plain SD card or SD/MMC card.
Help appriciated.
Hi,
I have a O2 Xda mini S (Wiza200). It has a German Rom but I use English in the Regional Settings as I donot understand German.
IPL & SPL 1.03
GSM 1.8.10.0
OS 1.1.7.5
Rom Verion 1.1.7.5
Rom Date 9/22/05
Radio Version 01.08.10
Protocol Version 4.0.13.18
ExtRom Version 1.1.7.105
NO Extra storage at this point of time.
Problem:-
1. At the time of boot it shows an error message
"Cannot load resource library \Windows\MCRes???.dll, exiting..."
I need help to resolve this. There is NO file the Windows Directory resembling this.
2. Also I need an advice is the above ROM is too old a ROM. Also any benefits I will get if I upgrade.
Thanks in Advance
/Varun
Hi All.
I've tried everything, well, almost but at least a lot... and my new MDA won't seem to unlock!!!
Here is the data:
ROM versie: 2.21.2.5 NLD
ROM datum: 3/9/06
Radioversie: 02.19.11
Protocolversie: 4.1.13.09
ExtROM versie: 2.21.2.108
Modelnr: WIZA200
Seems to be fairly new, haven't seen this version around on the forum.
What do I need to do?
Error message that I'm getting while unlocking:
ERROR: ITWriteDisk - An internal error occured
Please help!!! I would like to have my MDA unlocked!!!!
Cheers.
SignorE
for those of you having problems with lockiwiz 3a not unlocking your phone, well i was having the same problem, but not for long because i discoverd what i was doing wrong.
when you download lokiwiz 3a you have 2 things, lockiwiz and a folder called utils, now in the folder utils you will find a file called enablerapi its about 70kb in size, copy this to your MDA vario in the my documents folder, once there run it by tapping on it in my documents on your MDA saying Ok to everything, once youve done that, then and only then try running the lockiwiz application on your main pc making sure your connected via ActiveSync and look for the SIM unlock code in the black command promt box and jot this number down, then put SIM card in thats different from the one you use and switch on, when asked for the unlock code just type in the number you jotted down and bobs your uncle!!! well he was for me thats is.....good luck. :lol:
mda charmer
MDA
CALLED CHARMER WITH CHIP G3 G4 WILL NOT WORK
MDA
CALLED CHARMER WITH CHIP G3 G4 WILL NOT WORK
Click to expand...
Click to collapse
@chiragp: are you saying i cannot ulock my mda?!?! :'(
cheers.
signorE
Szabika, HU
Wowww.
Million ThanX for any line!
It's Cool!
Nagyon köszönöm!
New Mda Vario - help unlocking
Total Summary
IPL Ver : 2.21.0001
SPL Ver : 2.21.0001
Model WIZA200
ROM : 2.21.2.6 WWE
ROM Date : 03/09/06
Radio Version (GSM): 02.19.11
Protocol Ver : 4.1.13.09
Ext ROM : 2.21.2.109
OS : 2.24.2.6
Flash Chip type : M systems
--
With some reading I think my Vario is G4 --- Is that correct ....
Can I use lokiwizMSL 0.3a to unlock it...