ok, i just got a new mda2 from t-mobile (460eur for a non-simlocked version is a good deal, i think)...
of course, its in german so i wanted to flash it to english (like i did on my old mda1)...
but...there are some strange things...
of course, model is ph10a, but:
ROM version says 1.03.00 GER (date 09/25/03)
Radio version is 1.05.12
Protocol version is 1337.12
i've tried placing a new rom on a sd card, but cannot get it to boot - i simply cannot get bootloader to start...
and i've tried adaptrom, but that one (once the file signatures are ok) always complains with error: GetDeviceData - Unspeficied error
(if the mda2 is not properly connected, it says so - this error is after the usb connection is perfect)
any suggestions? i'm running out of ideas...
Related
I have upgarded long time back my Qtek to T-mobile test only ROM.
ROM version 4.00.21
ROM date 8/11/03
Radio version 4.210.00
protocol version 32S54
it is begomming very slow plus the reception of teh phone is so bad.
am trying to change teh ROM version but the system is giving me this error please help:
ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host.
cannot execute the remote communication program. please make sure that the usb/serial cable is properly connected
Tmobile ROMs can't be flashed through USB .. you have to use SD methode.
This slowness is a known bug in older WM2003 ROMs ... either to use a recent ROM like 4.01.16 or A30.09 .... or to install the fix named "clear_notify.exe" in your \windows\startup directory
Bad signal could be out of the RSU 4.21 ... depends on your network and the device type you can use a better RSU ... but it's a very risky action!!!
Hi, I am very new to this hardware , I surfed this forum for two days tried to upgrade using Special Edition 1.2 ROM but when I run the program, it gives me following error and nothing happen.
ERROR: GetConnectionType - An existing connection was forcibly close remote host
Error getting connectiontype.
I used different computes another laptop but same problem, please HELP.
I am using Activesync 3.7 as 3.5 does not get connected.
Here is my phone detail
Hardware PW10B1
ROM Version 4.01.16 ENG
ROM date : 02/04/04
Radio Version : 6.25.02
Protocol Version : 32464
ROM 4.01.16 does not allow downgrading via Exe-Method.
You have to flash your device via SD-Card and Bootloader.
Stefan
Hello, but I thought some of the users in this forum did unlock without using SD card, may be I am wrong.
One more request what type of SD card XDA takes, either plain SD card or SD/MMC card.
Help appriciated.
Hi,
I have a O2 Xda mini S (Wiza200). It has a German Rom but I use English in the Regional Settings as I donot understand German.
IPL & SPL 1.03
GSM 1.8.10.0
OS 1.1.7.5
Rom Verion 1.1.7.5
Rom Date 9/22/05
Radio Version 01.08.10
Protocol Version 4.0.13.18
ExtRom Version 1.1.7.105
NO Extra storage at this point of time.
Problem:-
1. At the time of boot it shows an error message
"Cannot load resource library \Windows\MCRes???.dll, exiting..."
I need help to resolve this. There is NO file the Windows Directory resembling this.
2. Also I need an advice is the above ROM is too old a ROM. Also any benefits I will get if I upgrade.
Thanks in Advance
/Varun
I am hoping that you can help me out with a little situation that I may have created on my HTC Tytn.
I was using the original ROM that Shipped with my Tytn and I was experiencing a "slow" device with some audio problems while in calls. Yesterday, I decided to upgrade. I installed SPL-2.10.01ipro. as per the warnings on the page (thankful that I have not bricked my phone) Worked perfectly for allowing myself to upgrade to what I think on the downloads page was the most current "stable" rom. Currently my Tytn is running the download listed below.
Upgraded HTC English Qtek_001
Rom 2.11.255.1 03/07/07
Exp Rom 2.11.215.102
Radio 1.38.00.10
Protocol 32.71.7020.12H
OS Build 15673.3.3.1
AKU 3.3.1
SPL 1.11
HTC BOOT 108
I have to admit, the unit runs great. Problem though, on the old OS, I was able to, under phone "band" select "2G". The reason for this is the Blackberry Connect software that I need to run for my work. (Or else I get assimilated into the world of Blackberry handhelds) will not connect as 3G. I have currently set the unit to "auto" for network type ("GSM ,WCDMA) and "auto" for GSM/UMTS Band. Any time I try to change this to anything else the unit comes back with a "Warning" that it can't complete the change. The unit still will not connect and says "Not Connected" under the bb_connect ver 4 status page. I have tried to install the older Rom back to;
HTC English
CID Q-TEK_001
ROM 1.18.255.3 7/22/06
ExtRom 1.18.255.106
Radio 1.03.03.10
Protocol 32.34.7010.01H
OS Build 14955.2.3.0
AKU 2.3
SPL 1.11
HTC_BOOT 1.04
I'm not sure if I can keep the upgraded radio and Rom versions and simply change the OS version but when I try to change to the complete rom above I get an error (260): UPDATE ERROR
"The Update Utility cannot connect to your PDA Phone. Please Check your USB Cradle/Cable is connected properly between the PC and your PDA phone"
The connection is good as I have been using active sync to install things like the blackberry software.
I am spinning my wheels here. I thank you in advance for any assistance that you can provide.
Hi folks!
I have a O2 Xda Orbit (in the wiki, the cruiser version).
Whenever I run the update tool to update whatever (splash screen gsm radio version, rom) it spits out this error:
The Image file is corrupted. Please check your Update Utility
What is wrong?
Device details:
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
-
Thanks in advance
Are you in Windows Vista? (Try Windows XP)
Do you have an SDHC card? (Take it off)
And don't forget to run USPL before you flash anything.
Also you can search for a newer version of the update utility (although I don't know if that will work).
thanks for replying
Hi!
First, thanks for replying.
USPL is the one that makes my screen show a tux pinguin, right? (how cool... can we run linux on that? )
if I run uspl firts it freezes showing a penguin and its not connected to computer via activesync, therefore not able to connect with rom updater
I will try to remove sdhc card