Hi, I am very new to this hardware , I surfed this forum for two days tried to upgrade using Special Edition 1.2 ROM but when I run the program, it gives me following error and nothing happen.
ERROR: GetConnectionType - An existing connection was forcibly close remote host
Error getting connectiontype.
I used different computes another laptop but same problem, please HELP.
I am using Activesync 3.7 as 3.5 does not get connected.
Here is my phone detail
Hardware PW10B1
ROM Version 4.01.16 ENG
ROM date : 02/04/04
Radio Version : 6.25.02
Protocol Version : 32464
ROM 4.01.16 does not allow downgrading via Exe-Method.
You have to flash your device via SD-Card and Bootloader.
Stefan
Hello, but I thought some of the users in this forum did unlock without using SD card, may be I am wrong.
One more request what type of SD card XDA takes, either plain SD card or SD/MMC card.
Help appriciated.
Related
hi,
I've XDA I with RUU tmobile 4.0.1and RSU 4.21
I'm trying to return to original o2 rom
I've cooked from rom kitchen t-mobile 2003 ruu rom
When I launch exe file the pc give me this error:
"ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata"
and then
"ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
I've try to put nb1 file on sd card with image tool but my device has bootloader 5.17 and it doesn't work!
As I've installed t-mobile 4.01, the phone part of the device doesn't work (I've accidentaly swith to 1900, my sim card support only 900/1800 and here in italy there's no 1900 net)
Anyone knows other methods to load ruu from sd or can help me to resolve activesync error?
So whats the reason for you wanting to downgrade, is it because your radio is no longer working?
If thats the case you just need to up/downgrade your radio stack, on
that note I suggest you upgrade to the Qtek 1010 Radio Stack.
The Qtek 1010 Radio Stack Upgrade can be found at:
http://www.carrierdevices.com.au/downloads/asiapacific.htm
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
Note: Last time I checked the the above file came with both the ROM and Radio upgrade, so just use the one for the radio.
HTH
I had the same problems you did, without wanting to steal anyone's thunder, my thread here : http://xda-developers.com/forum/viewtopic.php?t=3860 deals with those issues and points you to the threads where easy answers can be found. I also operate off 900/1800 and have the info in that thread on how to change back from 900/1900 to 900/1800. Let us know if there's anything there that gets you stumped.
Don't play with RUU unless someone who knows what they're really talking about advises that you should for good reason.
Hi after successfully upgrading my rom to wm2003 thanks to yorch.net i am having trouble with reception on the phone so i thought i would try a different rom but ' now i am getting an error message connection forcibly closed by remote host. Any help would be gratefully appreciated
Thanks Derek :?:
may you give more details ... like your device type (A or B), what ROM did you use for upgrade ... how did you upgrade (SD or EXE) ... etc so any one here can advice
It is an XDA 1 running
Rom Version4.00.10 ENG
Radio Version 4.01
Protocol Version 324e2
thanks
I used xdatools to load rom file and upgraded to rom via the usb cradle.. the rom file i used was made in yorch's kitchen.
version 4.00.05ppc2003 with xda config data
any help would be great
thanks
It's normal to get this message with TMO 4.00.10 and 4.00.16 if you tried to use XDAtools or EXE. You have to use the SD flashing method
Ok thanks for your help will try this when i get sd card
Derek
My phone was upgraded to 4.00.21 beta and today i just download the new version 4.01.00 to upgrade my phone (XDA 1)
BUT..
While I'm upgrading I foud this error.
Error 011 : Execute remote communication program error
Cannot execute the remote communication program, Please make sure that the USB/SErial cable is properly connected.
(But I can Syncronize with my PC and can explore my XDA)
Why? How can I fix it?
PS. I was download 4.01.00 by type of .EXE I can't use SD Card Upgrade Method because i can't downgrade bootloader from 5.17 to 5.15
Thank you
there is a patch for 5.17 that should be applied before flashing ... simple search on the forum and u will find the topic (i think the author is pdhenry)
The same thing.
Hi !
I have a problem like you, but XDA 1 cannot syncronize with PC. I don't know how to fix it and no one can help me. I suppost that some one can help me to fix this problem.
Thanks,
This has probably been answered before, but, I can't get my SX-56 to upgrade to WM2003SE. I get a communication error everytime.
"ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host.
error getting devicedata"
Please help.
Other info follows:
Radio Stack: A.33.02
Protocol: 1.3.3
Hardware Version: PW10B1
Again, any help would be appreciated.
As mentioned 1000 times here in the forum:
Update from this ROM Version via EXE-File is not possible You have to downgrade first via SD-Card to another ROM Version (e.g. 3.17.03)
Stefan
So sorry. I saw a couple of references that I THINK said that, but I wasn't for sure. That really sucks because my Wallaby ruined my SD card, so I have to buy a new one before I can reflash. Why is it that if you have that build you can only reflash the ROM via SD? Or is that in here 1000 times also?
viper498 said:
That really sucks because my Wallaby ruined my SD card, so I have to buy a new one before I can reflash.
Click to expand...
Click to collapse
Why this? How has it happened? First time i ever heard,t hat a card is getting destroyed by the wallaby. Have you tried reformating the card?
viper498 said:
Why is it that if you have that build you can only reflash the ROM via SD?
Click to expand...
Click to collapse
It´s a limitation directly in the ROM. As much as i know in the moment it wasn´t further investigated how they realized this "option"
Stefan
My friend bought long time ago; on ebay. Appears sim-locked.
Now i'm trying to help him in unlocking, i have read lot of treads, and tryed several programs, but still no luck.
Can you guys please help me and advise how to ulock the phone.
Configuration is:
T-Mobile pw10b1
MS Pocket PC v.3.0.12039 (buid 11178)
ROM 3.08.10 ENG (07/11/02)
Radio 6.02
Protocol 324e4
Bootloader 5.15
Network adapters:
AsyncMac1 NDISWAN Adapter
NE2000 Compatible Ethernet driver
PPTP1 NDISWAN Adapter
What I did:
using this page http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
-Installed ActiveSync from MS site;
-Backup the ROM to SD and to PC using XDATools;
-Tryed to flash bootloader with 'pnewbootloader bootloader_v5_15.nb0' but it returns an error 'Unable to find flash info offset, cannot disable bootloader writeprotect'
?? May be it's because i'm already on 5.15 bootloader?
-then i tried to Install the 'XDA-Developers Special Edition ROM 1.2' but error said that BIOS is for pw10A1, not mine.
?? where can i get Special ROM for pw10b1?
-then i'm tried to go to http://www.romkitchen.de/, but didn't use the ROM because not sure if works (phone is not mine). Which ROM to use, will WM2003 SE work on mine phone? Will it remove SIMlock?
- i'm reading about the XDAunlock program, on web said: Please note that XDAunlock will only work on device with a PPC2002 ROM that has the Wireless Modem feature. Do I have PPC2002? Do I have Wireless Modem?
Thank you in advance for help!
ps is it possible to get unlock-code some where? Upgrading ROM can be too risky (phone is not mine...)
First of all, since you have already backuped the ROM of the devie would you be able to send me the File?
Cocnerning XDA Special ROM. Normally faslhing that should work either for PW10A and for PW10B devices. There is a tool called adaptrom (http://wiki.xda-developers.com/index.php?pagename=adaptROM) that can be used for flashing.
But I´m not quite sure if this ROM will work for unlocking the device. The Radio Stack of the device is also quite old. But you can give it a try. Securest way for flashing is via SD-Card.
Done this hundred of times already.....
Stefan
HI!
Just tryed to install new ROM via SD-card from romkitchen, and it works!
Everething but SIMUnlock
(3.17 and XDAunlock were included...
Please advsise how can i remove it?
Also, when i boot from SD it said - CE, not CTE+Boot - is it ok?
Will WM2003SE work on my XDA?
as for flash file, i'm going to put it on the rapidshare, so i don't need to brake it apart...
can i burn NK.nbf onto SD? I have it from XDA-developers Special Edition ROM?
Thanks again
http://www.romkitchen.de/ roms also 2003SE
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD guide how to get .nbf to the sdcard
Rudegar said:
http://www.romkitchen.de/ roms also 2003SE
Click to expand...
Click to collapse
Thanks! but i wonder if 2003se can be installed onto my box...
Rudegar said:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD guide how to get .nbf to the sdcard
Click to expand...
Click to collapse
yap, this page i'm using.... Can you please advise me - what is difference between .nbf and .nb1 ROM's.
any ideas how to remove simlock on my xda?
appreciate your help!
http://wiki.xda-developers.com/index.php?pagename=WallabyFileFormats/nb1
vs.
http://wiki.xda-developers.com/index.php?pagename=WallabyFileFormats/nbf
try reading this about unlock
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
I put my ROM:
http://rapidshare.de/files/38022282/rombackup2.nbf.html
Also, I put XDA-developers Special Edition ROM - just copied NK.nbf file onto SD-card using XDA tools.
But XDAunlock didn't run on xda boot... but i found this file in \Windows\ directory and run manually - and it's WORKS!
THANKS A LOT FOR YOUR HELP!!!
After that I upgraded Radio to 6.24.00 (no sure I this would remove sim-lock, didn't test; hope this version is stable/better that my previous 6.02)
Now i need to find a way to install dual-lauout (Russian) and to install some good Media Player (with avi, mp3, mov, wma and 3gp) - can you give me any advices?
Thanks again for all your activities and for your site!
ps forgot to ask - my devise became pw10A1, not pw10B1, is there are any risks with that?
http://www.pocketpcfreewares.com/en/index.php?soft=813
== best audio player imho
http://tcpmp.corecodec.org/ best video player which also play audio
is really useful for me, I am glad to read it here.
asvaran said:
My friend bought long time ago; on ebay. Appears sim-locked.
Now i'm trying to help him in unlocking, i have read lot of treads, and tryed several programs, but still no luck.
Can you guys please help me and advise how to ulock the phone.
Configuration is:
T-Mobile pw10b1
MS Pocket PC v.3.0.12039 (buid 11178)
ROM 3.08.10 ENG (07/11/02)
Radio 6.02
Protocol 324e4
Bootloader 5.15
Network adapters:
AsyncMac1 NDISWAN Adapter
NE2000 Compatible Ethernet driver
PPTP1 NDISWAN Adapter
What I did:
using this page http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
-Installed ActiveSync from MS site;
-Backup the ROM to SD and to PC using XDATools;
-Tryed to flash bootloader with 'pnewbootloader bootloader_v5_15.nb0' but it returns an error 'Unable to find flash info offset, cannot disable bootloader writeprotect'
?? May be it's because i'm already on 5.15 bootloader?
-then i tried to Install the 'XDA-Developers Special Edition ROM 1.2' but error said that BIOS is for pw10A1, not mine.
?? where can i get Special ROM for pw10b1?
-then i'm tried to go to http://www.romkitchen.de/, but didn't use the ROM because not sure if works (phone is not mine). Which ROM to use, will WM2003 SE work on mine phone? Will it remove SIMlock?
- i'm reading about the XDAunlock program, on web said: Please note that XDAunlock will only work on device with a PPC2002 ROM that has the Wireless Modem feature. Do I have PPC2002? Do I have Wireless Modem?
Thank you in advance for help!
ps is it possible to get unlock-code some where? Upgrading ROM can be too risky (phone is not mine...)
Click to expand...
Click to collapse
u no need special rom for 10b1. just try to run adaptrom before start program A. it will work