Where is problem?SPV M3000 ROM_update. - 8125, K-JAM, P4300, MDA Vario General

Dear SPV M3000 after ROM update stay in align screen.
I'm going behind square but nothing , i have try many time but again nothing , all day if you touch in screen , you can get nothing!!
I' get ROM update T-mobile and rom update geting to finish , but again "align screen" , nothing.
...and i'm going to original ROM update from orange.ch http://www.orange.ch/offers/orangePhones/spvM3000/spvM3000Rom?ts=1147713403881 , and also ROM_Update going to finish , but my friend's again align screen.
After i have get here in xda-developers this .CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE. and i'm get to start ROM_update , now i have different problem !!!
Phone not starting , just staying here:
IPL 1.01
SPL 1.01
OS 2.17.7.2
T-Mobile
...Plz if somebody from you have like this OCCURRENCE , find little time and help me ...
I'm be very happy to read the solution

:!:
..no one help!!
can somebody from you have this "experience".?
If yes , plz post here!
Sincerely

Related

O2 XDA Mini S.. hangs on start up

Hi guys This is my first post im new to the forum, So i hope youll help me out.
I have a O2 XDA Mini S.... and when i start the phone it hangs up and on the screen it shows the start screen with "O2" in the centre and the following in formation on the top left corner :
IPL 2.21
SPL 2.21
GSM 02.07.10
OS 2.21.4.1
I updated the rom to the latest as you can see. But it still hangs up . Can youll please help me as to what can be the trouble and how to sort it ?
Thankyou
Regards
http://forum.xda-developers.com/viewtopic.php?t=56968
all the infos there
Im so sorry i didnt get the last reply you gave there? I did the ROM update already but it still shows me only the startup O2 screen. Is there any thing else i can do except for the ROM update
Still stuck on the O2 startup screen .. UPDATED THE ROM ,, did a hard reset but no luck !!
Anyother Ideas to get my phone to work ??

Please help me, I need ROM 1.11.0000 German

Please help me, I need ROM 1.11.0000 German. I can't boot to Windows Mobile, only see Logo O2 then XDA Orbit has a black screen. I only can run Boot Loader.
Thanks all.
help me, Pleae
When you get into BootLoader why don´t you flash with official HTC WM6 ROM?
I flashed Rom WM6 Ship German from HTC successful but it's only stop at O2 Logo and auto turn off screen to black. . Please help me. Thanks all.
The update was successfull?
Try a reflash?
yes, i tryed twice but can't boot to WM only stop at Logo O2 and atuo turn off. If you have ship rom German, you can help me, thanks you
You flashed your device with HTC WM6 ROM... and your Bootscreen shows the O2 Logo...
hm...so the update was not succesfull...
Have you tried the official O2 ROM?
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
I Flashed rom from site O2 - Online German but it's only can boot to O2 Logo and auto turn off screen to black. Please, anybody can help me. (
hieupc said:
I Flashed rom from site O2 - Online German but it's only can boot to O2 Logo and auto turn off screen to black. Please, anybody can help me. (
Click to expand...
Click to collapse
just try and run USPL first then flash the Rom [NEW ROM]: Artemis Vanilla 1.0 WWE - 5.2.1908 (Build 1850)
this should solve your problems.
i only can run Boot Loader, so i can't use USPL to Unlock CID
help me, please
please help me (

bad Rom installed ...

Hello there!
First of all, please excuse my terrible english ... but I hope you can help me!
I unlocked my Athena reffering to this link ...
http://forum.xda-developers.com/showthread.php?t=315831
... and everything went well!
I installed this rom ...
http://forum.xda-developers.com/showthread.php?t=346221
.. and everthing was really awesome !
Then I noticed that the keyboard layout was qwerty .. and as I am a german I´d like to have qwertz ans so I installed this ROM:
http://forum.xda-developers.com/showthread.php?t=399938
Unfortunatedly I´ve chosen the wrong one (strange order of links) because after installing the rom The Device comes up with the warning descriped in the post ... and what´s worst and actually my Problem:
The device resets each time during the "customization", reboots and tries to do the custom again.
It resets even when I try to install another rom ... no tricolor screen or anything!
So the device is now running an unusable OS and I don´t know how to install a new one!
HELP ... I need somebody!
... solved!
found a solution here:
http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
.. or at least how to install a new rom!
http://forum.xda-developers.com/showthread.php?t=397518
you can find the links to the ATHENA ROM.
Other German ATHENA users could provide some help to set the Kb
Carefully chose the SPL version, 1.2 since you install AP4, after AP4 you will have the newly partitioned ATHENA, with SPL 3.5 (no way to flash any original HTC ROM or an 1.2 SPL ROM, a tool to revert it back is in developing stage)

[Q] NEED HELP FOR P3450 pls

Hi i'm sebastiano, can someone help me pls?
i've buyed an htc p3450 with windows 6 , but i don't know the id and other codes.
i only know theese: ipl 2.20.0002
spl 1.11.0000
this morning i tried to change original rom with onyx 5.6
i've made this things:
i've installed cert.spcs.cab and enablerapi.cab
after using ELF_USPL_2.26.0000 i made the procedure for charge rom
and all were ok.
after i used the new os and its worked good. i made an hard reset before using definitively it. but after 10 minutes the system didn't start yet.
It run the image of Tim Operator and shut down.
The boot loader work now. i tryed to reinstall the sistem, the procedure finish without problem but when the system try to initialize the new rom , display the tim logos and after shut down..
someone know what i do and why system not reboot?
i read that i need the original italian rom for retry all my operations..but i don't know hot to find the id of my precedent rom...
pls help me
What's your actual IPL/SPL ? (you can see it in bootloader)
ipl 2.20.0002
spl 1.11.0000
theese are now
Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.
tito12 said:
Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.
Click to expand...
Click to collapse
yes it's surely elf because on the box the name is htc p3450/3452 Ita S
so elf isn't S i think is the xl model
now i'm going out, but if you can help me to know what is the problem, tomorrow we can meet again
i want to remove tim's brand and i will put in a good rom with large buttons
see you bb and thanks
As far as I know xl is elfin, and if you flashed the wrong rom maybe that's why you got this problem. Anyway here's a link to a good friend who's probably more expert on Italian roms than me, Flaviopak, send him a pm http://forum.xda-developers.com/member.php?u=778494

[Q] HT ELF 0100 stuck at bootloader tricolor

IPL 1.15.0002
SPL 2.28.0000
thats what i got after i tried to upgrade to RUU_Elf_HTC_ARA_1.17.415.3B_4.1.13.47_02.98.90_BLUE_Ship . i know i got it CID locked again and cant fix this problem , i searched every bit over net about a solution but i faild im so piss off , my phone was t-mobile , any ideas pls i love this phone its a gift from my brother , regards and thx for ur time

Categories

Resources