i don't know what was happen with my XDA II today, when i put it on the dock,it still charge but it wasn't sync with my laptop,i thought that was the software problems so i decided to hard reset my phone but after that it still like that,i try with another XDA II( my friend's) and it is normal but not with my phone. So what should i do??? to sync my phone again,Now i'm not able to install any software to my phone and i'm crying to wait for some help...
Thanks for read my thread
try running the program in \windows
called repllog.exe
and then putting it back in the cradle
It might be your serial port
www.ppctechs.com fixed mine for $60.
hi guys, i have been reading on upgrading to wm5 and thought i would give it a go, i put a file on my handset called getdevicedata, as soon as i run this on my handset my handset went to serial and now i can not reset it, i have tried hard reset and also taking battery out for a wile but the screen is stuck on serial??? please help guys, it is also showing not connected and will not connect with activesync when i put into the cradle.
ANY HELP OR INFO AT THIS TIME GREATLY APPRECIATED !!
Thanks
alan
i am realy struggling guys, i have been searching the forum for a couple of hours and cant find any advice on what to try to unbrick my handset, that is if it is bricked. if any one could drop a link t any helpfull info i would be very greatfull.
thanks
Is my blue angel bricked? i have serial at top and v2.07 at bottom, when i put into cradle i get usb, i have disabled the active sync and downloaded mtty.... am i on the right tracks for putting it right guys,i dont know how to use mtty, im geting stressed out now as i have searched the sight several times with no look.
Cheers
I have Qtek S110 and since yesterday it keeps reseting by itself. Usually when I try to make a call or sombody calls me. I changed the firmware 3-4 times but no change so I guess it is not a software problem. I cleaned the contacts and everything good . The battery is fully charged.
Do you have any suggestions?
same with me few days ago. do you remember, u just installed new software? might be confict, or software is in beta, has bugs.. hardreset, try installing your softwares 1 by 1, test with calling form different phone, untill u find which software make your phone reset.
O2 mini keeps reseting
Hi,
I also have the same problem with my O2 mini. It keeps resetting by itself. Sometimes if i try to play a MP3 file and it resets. I think its a software problem. I took a complete backup and did a hard reset. Then the device worked properly. But after I restored my backup, the reset continues.
Either its a software conflict or its a virus/bug.
Hi all,
my imate-jam does the same. I already tried previously working rom restore but nothing. Now I ordered a new battery since mine is more than two years old. I'll try it and let you know.
Bye.
sassoz
Any luck?
Hi all,
I have already given you my assumptions that either its a software conflict or a bug. Because after hard reset it worked fine and after full backup restoration, again the reseting started.
Is there a patch available?
I think it could also be shortage of RAM Memory as Magician has always been having Memory Problems.
jashsoft said:
Hi all,
I have already given you my assumptions that either its a software conflict or a bug. Because after hard reset it worked fine and after full backup restoration, again the reseting started.
Click to expand...
Click to collapse
This is not my case, infact it keeps resetting just after a hard reset without any software installation, i've also removed the phone sim.
I'm still waiting for the new battery that i've ordered...
bye
it's definitely the batter. i already experienced the same problems and my device worked flowlessly again with a new battery.
I had exactly the same issue. A new battery solved this. My battery was 1,5 years old.
Thanks!
Thanks for solving this problem.
One last question. How much would a new battery cost? And is there another company like Energizer making batteries for Magician that would last longer?
Thanks!
Hi,
after changing the battery (bought this one http://tinyurl.com/3yx8oo), the device continued to reset. Then I've cleaned the battery contacts and the little battery cover switch with a contacts cleaner spray and I haven't had any problem for the last two days...
Bye
Hi sassoz, please explain more details. I got new battery but it seem no change.
Thank you.
I had the same problem it crashed whilst making a call and eventually went on a endless reboot cycle. Corrupted contacts could be the problem ( it was with mine, I had restored a corrupted contacts backup). What I did was to remove the batt for a few minutes, put the batt back and hard reset. Later sysnced the contacts thru AS. The problems vanished.
Hope this helps.
Yep, it seem about contact list. But I don't know what is "corrupted contact"? I sync the contact list with my laptop through ActiveSync, but my contact list is OK.
Please explain more details.
tukhoi said:
Yep, it seem about contact list. But I don't know what is "corrupted contact"? I sync the contact list with my laptop through ActiveSync, but my contact list is OK.
Please explain more details.
Click to expand...
Click to collapse
Tukhoi, I was using PPC Contacts Backups, to backup (duh!) my contacts on the move. The problem discussed here occured almost immediately after I restored one such backup. To test this further I did a hard reset ( after sorting this issue) and restored the same backed up contacts and voila! the problem came back and went on a continous loop of resets. So I came to the conclusion that the backup of the contacts that I had taken was corrupted. Hope this is clear, sorry if I was vague.
Hi veeru27,
Thanks for your explanation.
I removed all my pst (data file of outlook) on my computer, remove all contact from outlook on my computer. Then I sync PDA with computer. After that, I connect PDA with computer again, choose not to sync contact list. The problem still come back.
I though it's about contact list, then I remove all contacts from PDA, just leave some important contacts. It's OK until now (about 1 day). Hope it work...
Thank you so much.
Well, I was talking about electric contacts, not pim contacts.
So, i changed the battery but I still had the problem. Then I cleaned the electric contacts (where the mobile takes energy from the battery) and the little switch that activated by the battery cover (when you remove it the mobile switch off) with a contacts cleaner spray.
For two days I had non reset but suddendly they started again. I have a suspect that they have to do with electric part and should not be a software issue.
Sassoz,
If you are using Magician / JAM. There is a known problem with the loose battery cover, which causes frequent resets. (even a slight movement in the battery cover causes a soft reset). I simply glued the battery cover hinges to the main panel.Since then no problems. I suspect that the battery cover could be the culprit. Try this if you are adventerous http://forum.xda-developers.com/images/icons/icon10.gif
Talking
tukhoi said:
Hi veeru27,
Thanks for your explanation.
I removed all my pst (data file of outlook) on my computer, remove all contact from outlook on my computer. Then I sync PDA with computer. After that, I connect PDA with computer again, choose not to sync contact list. The problem still come back.
I though it's about contact list, then I remove all contacts from PDA, just leave some important contacts. It's OK until now (about 1 day). Hope I work...
Thank you so much.
Click to expand...
Click to collapse
Glad it worked!
After deleting contacts, it keep working without reset for more than 2 days!
Hope it work.
yeh same problem
i what did was i downloaded the latest rom and a file called
MaUpgradeUt_noID.exe from this site
then i extracted the rom and placed the MaUpgradeUt_noID.exe into the place where the rom is.
then i when into MaUpgradeUt_noID.exe and i updated it and i fixed the problem, it never reseted again and its been working no problems
Hi Guys
Please could any on help me i have a orange spv m5000 i think i flashed wrong rom killed phone, but have managed to hard reset via, on button plus the two minus buttons and the soft reset hole, but when i press 0 to restore factory defaults i then see the text ( serial and v2.01 ) but phone will not start up, when i plug in usb cable the only thing that shows up in windows is (pocketpc smartphone) in the safely remove hardware on taskbar then i tryed uni_exitbootloader but get error (cannot open usb port) i have stopped activesync usb detection, but still no joy.
is there a way to get the usb port opened or is this phone bricked, Man i hope not i loved this phone and cant really afford to get another (Real hard times!) Man i hate learning the hard way.
I also read somewhere that the phones batterie memory can get curupted and there is a way to fix it by shorting out the pins if any one has that info that would be great as well.
a million thanks for any help any one could give I mean that folks.
if you think you can help would you be so kind as to send me an email telling me howto, [email protected]
again many thanks for any help
Regards
Daz
PS sorry if this is in wrong forum if it is could you tell me where its suppose to go cheers
Try doing Doc format and/or running MTTY
All information can be found on my signature link
Good luck,
Double post!
Thanks orb3000
ill try them out
and sorry about double post really unsure where it was suppose to go.
Thanks again for answering
PPC
Hi Again
tried mtty, says
com1 port can not open
even though i disconnected active sync and usb cable as recommended but still no joy,
i still have the faint serial and version displayed on screen but it seems as though theres no way of finding a connection to the phone,
i havent tried doc format still looking on how to do that but i remember reading about that and i think i will still have same issue as mtty has, weird that in my task bar i can see ppc smart phone in safely remove hardware and yet no prog can get to it.
got a feeling this is a lost cause, sending it in for repair costs the same as buying a secondhand one so whats the point of repair! crap man this sucks
Orb could you suggest a good working rom for my spvm5000 so i could try a differant rom to see if that might make a differance ill try any thing at the mo,
oh well thanks for trying dude.
regards PPC
I would recommend Tomal 8.2, 8.5 or 8.9
Let´s see if other member can give you more alternatives for your problem.
Hey i am a semi noob i guess .
The other day i was making a call put my HD2 back in my pocket and when i took it out the screen just wouldnt respond to my touches, i have insurance but i need to reset back to original settings, as i have an android rom running, i cant connect my phone to my pc and i have windows mobile centre 6.5 .. Please help ! i would appreciate it muchly
thanks from a huge noob :/
please can someone help me with this issue!!!
ricey91 here is a good tutorial from snarksneeze on how to bring back windows mobile 6.5 default. http://forum.xda-developers.com/showthread.php?t=681317