My internet connection is messed up. I was playing with the settings and ittries to connect via 02 active ,previously it was onnecting via mobileweb and it would dislay all pages without any problems, but now it tries to connect via 02active and seems to get connected and then comes up with this message
The page cannot be displayed or downloaded because the connection was lost. Check the connectiona and try again later
The connection is still active, because the UMTS icon has been replaced by the data umts icon
I think if I somehow get it to connect to mobileweb, the connection will be fine and I will be able to view pages. Can you guys tell nme how to fix my internet connection
Related
When my 8525 is not plugged in and charging to my desktop or laptop, it connects to the internet fine via Cingulars Media Net. When I plug it into my laptop or desktop, it tries to connect thru that network and drops the Cingular network.The problem is that it won't connect that way and then won't re-establish a connection thru Media Net. I get the wap.cingular error message "the modem has dropped its connection...."
Any ideas on how to force the phone to ONLY use Cingular network no matter what external device its connected to?
No ideas on this one?
OK I don't know if this is possible but with my Hermes(WM6) connected to my PC via USB using activesync 4.5. Can I get it to connect to the internet via the PC's internet connection (cable LAN to router).
I don't have wireless LAN ((
Thanks
Mike
if the pda is connected and my network is choosen as connection in
system settings network.....
in the pda
then it have access to thee same network as the pc it sync with
same thing with bluetooth sync
If I go into manage networks it only shows T-mobile and if I try set a new network they are all dial up types. when I try to connect to the internet I just get an error message saying connection was lost
i go into settings->connections-connections->advanced->sellect network
i get 2 dropdownbox's with my isp and my work network
if i pick my work network i only have network access over activesync
ok I tried that and all i still get is the connection lost error????????
I have also tried it on a wireless network, it connects fine and then the the same error
I used to have an internet connection through the usb cable, and now I don't after making an unknown change. I can connect to wifi, but wanted to still have usb internet connections as some hotels I stay in do not have wifi. I've been messing around with the setting>connections, but no luck. I am also wondering if any of you Cingular customers have been able to connect with Edge even though you have the WIX blocked for the number. Mines connected and I was wondering if I will be charged.
Not sure how it will be called in an english ROM since I am running O2 GERMANY but you should be able to get this activated under START -> PROGRAMS ... look for an icon what indicates something like INTERNET SHARING. Click on that icon and activate Internet via USB again.
INTERNET SHARING, i just found that today now i am using my desktop thru the 8525.
Actually I am trying to go the other way. I would like the internet from the laptop.
when connected to activesync you automaticly have the laptops network on your pda unless you turned it off
All I get is "Cannot connect with current connection settings." I've tried all the different setting and still can't get an internet connection. Funny thing is that the HTC Home weather updates while connected, but not the internet. The wifi has no problems, but again a hotel might not have wifi.
Hi
I have the same problem, IE will not find any web site either via usb or wifi (ok via 3G) HTC home weather works fine. I then installed Mozilla minimo and I can surf with out problams. I think there must a be a hidden IE setting/registry problem that I don't know how to access
I have connected my WM6 Hermes to our WLAN network, but I cannot access the internet. And yes, I am 100% sure I am connected and have put in the WEP key and everything.
When I try to go to a webpage, it says, "The page cannot be displayed or downloaded because the connection was lost. Please check the connection and try again."
So I check the connection and sure enough, I am connected fine.
are you using any proxy's on your internet to connect?
if so, configure them in your hermes
no I don't use any proxies, it is just regular Wi-Fi... when I look under wifi in the Connections section of Settings it says I am connected to my network, and I was playing around with the "Connections" app in that section and I all I could do was edit some stuff about my Media Net or 3G connection.
the icons on the top bar clearly shows what connection is being used as active data connection
the manual describe what each icon mean
you should be able to force it to use other connections then gprs
in
settings->connections->connections->advanced-Select network
alright I got it to work, I disabled some IEEE EAP stuff, but now it only remains connected for like 10 seconds, about long enough for me to open 1 webpage, even though the icon at the top still says my Wi-Fi is used as my active data collection
Hello,
I'm confused by the internet connection of my Topaz. I have set it to connect to 'my work network' so there is no internet connection possible over 3G/gprs/edge, but only when i'm connected to my computer over usb. When I don't set my phone like that, my experience is that it connects to the internet like all the time (with huge costs from my provider as a result)
On my past phones (regular phones), I used to have the internet enabled all the time, there wasn't even an option to turn it off I guess. They only went online when I opened the webbrowser and it disconnected edge automaticly when closing.
With my current setting on my topaz (work network) I can't update my status on facebook or twitter as it can't connect, and that's a bummer. But I can't turn it on because then it keeps connected all the time and my bill rises incredibly fast in one day.
How do I set my device so that the weather and all other automatic things can't connect to the mobile internet, in a way that the device only connects when I start to browse or update my status, and disconnects right after that? I don't want to disable weather totally because I still want to allow it updating through my USB connection.
I know there is a button 'Data connection' in the communication manager, but turning it off still doesn't do anything, i can still connect to the internet. When locking the device I can choose terminate connection, but it reopens automaticly.....
I simply don't want any data being transfered behind my back.
Search and download "NoData"