I used to have an internet connection through the usb cable, and now I don't after making an unknown change. I can connect to wifi, but wanted to still have usb internet connections as some hotels I stay in do not have wifi. I've been messing around with the setting>connections, but no luck. I am also wondering if any of you Cingular customers have been able to connect with Edge even though you have the WIX blocked for the number. Mines connected and I was wondering if I will be charged.
Not sure how it will be called in an english ROM since I am running O2 GERMANY but you should be able to get this activated under START -> PROGRAMS ... look for an icon what indicates something like INTERNET SHARING. Click on that icon and activate Internet via USB again.
INTERNET SHARING, i just found that today now i am using my desktop thru the 8525.
Actually I am trying to go the other way. I would like the internet from the laptop.
when connected to activesync you automaticly have the laptops network on your pda unless you turned it off
All I get is "Cannot connect with current connection settings." I've tried all the different setting and still can't get an internet connection. Funny thing is that the HTC Home weather updates while connected, but not the internet. The wifi has no problems, but again a hotel might not have wifi.
Hi
I have the same problem, IE will not find any web site either via usb or wifi (ok via 3G) HTC home weather works fine. I then installed Mozilla minimo and I can surf with out problams. I think there must a be a hidden IE setting/registry problem that I don't know how to access
Related
I've just managed to setup my wireless conection on the mini s and connected up to internet explorer.
When i was messing about the other day and couldn't get wireless working everytime i opened up IE it tried to connect via GPRS but failed (i don't want to connect through anything that i have to pay for!!)
Anyway today i reset machine, setup as corporate and played with my router settings and its connected upto wireless. Now i've gone into IE and it connected up to the webpage straight away.
Question is, it just connected straight in, so i want to make sure that i'm not on GPRS or anything, how do i do that?
Cheers
Sorry I'm a new user and have yet to connect to my wireless network but I thought you could just turn on flight mode and connect using just the pc side of the phone???
I think I have worked it out now. I am typing on the mini s now, great piece of kit! I have noticed that if you are on gprs (or its trying to connect through that) then a G appears where the connection icon is. that means I am happy because my wireless connection is working every time now and its not connecting through gprs!
i'm very new to this kind of stuff so can someone plz tell me if i can use the wifi feature on my qtek to pick up a wireless internet connection and have the phone connected to the computer through activesync simultaneously? cus i can't seem to make it work. everytime i try to connect the phone to the computer through activesync after i have had the wireless internet connected, the activesync seems to disconnect me from the wireless connection. so im just wondering if i can connect those 2 connections at the same time or not?
no you can't, sorry
Activesync tears down the wifi connection and builds a new conection using you PCs networking. You can still access the intenet through you PC though.
thanks
thanks for the quick reply. yeah i know i can access the internet through PC connection but the problem is that my wireless adapter is broken so i want to have my qtek pick up the internet and then use activesync to transfer the internet connection back to my computer so i can go online on my PC, thats all. so there is no way we can work it around huh?
Hello
I have x7500 i have Att data plan which works prefectly while used on the advantage. When I try to share it's internet conneciton witha PC the problem starts.
I open up the program Internet Sharing in the Advantage have select USB as PC connection and MediaNet as Network connection. Advantage connects to the internet viag 3g and then i plug in phone to the computer, computer connects, I get the IP address assigned. Everything seesm ok but its does not work, web pages don't open, not replying to any ping commands. I tried this on two different PCs with the same result. Does anybody know what is the problem ?
Thanks
Don't know... everything you are doing is OK. That's the way I'm using it as far as I know.
Could be the XP firewall messing around? I usualy shutdown that crappy firewall included in XP.
ioevanc said:
Hello
I have x7500 i have Att data plan which works prefectly while used on the advantage. When I try to share it's internet conneciton witha PC the problem starts.
I open up the program Internet Sharing in the Advantage have select USB as PC connection and MediaNet as Network connection. Advantage connects to the internet viag 3g and then i plug in phone to the computer, computer connects, I get the IP address assigned. Everything seesm ok but its does not work, web pages don't open, not replying to any ping commands. I tried this on two different PCs with the same result. Does anybody know what is the problem ?
Thanks
Click to expand...
Click to collapse
You should be connecting to your PC by USB first. Any connection is then instigated from your PC after connecting Internet Connection on the x7500.
You just start IE.
Found solution
I finally called HTC Support they told me to disable advanced network functionality found in Settings >> USB to PC, restarted the device and works beautifully.
I am wondering did the Advantage come with this option disabled for others ? For this that USB internet sharing always worked can you check if that option is enabled or disabled ?
thanks
Good Morning all. I have searched for days, not only this site, but many others, and as of yet, no appropriate solution. Hopefully someone more versed than me with the Wizard might help.
Here is the scenario....I am able to connect my HTC Wizard to the WiFi of my roommates router. He is connected to DSL 3.5 Mbps. On the Wizard I can surf the internet, no problem. I have a computer in my room, but it does not have a wifi card. I am wanting to use my Wizard to connect my computer to the internet via USB, using the connection (WiFi) that exists on my Wizard.
So far, I can connect to my computer through active sync and browse the files on my Wizard. I also am able to tether my Wizard to my computer via Internet Sharing on my EDGE connection. I do notice when I connect my Wizard that is connected to WiFi it shows a LAN connection in the taskbar at bottom right, however, when i try to navigate to any web page in internet explorer, google chrome, or firefox, it comes up with the error like I am not connected.
I know there is a simple fix for this, but I am frustrated and tired of searching to no avail. Thanks in advance many times over.
Hello All,
Here is my problem and I need help.
Situation:
Laptop WinXp is connected to Internet via cable modem.
Now I want to make access to Internet via Wi-Fi from laptop for WM 6.5 device.
I manage to connect and browse Internet with other laptop via laptop connected to cable modem –internet. WM device is showing connected to SSID but Internet doesn’t work.
Internet access via ActiveSync and USB cable is working perfectly but via Wi-Fi doesn’t
After many hours browsing various forums I couldn’t find any good working solution.
Any help is highly appreciated.
Regards and Thank you.
zoran974
ACER S200
Please find attached.
How can I at least connect WM6.5 using Laptop's Internet?
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
samalam said:
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
Click to expand...
Click to collapse
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Undoubtedly, technology problems hold you and your company back. That's not good for business and as such it's a great idea to get the problems fixed quickly. For several small companies, small business computer support isn't confined to one person within the company; rather, it is tech support that is called in.
==================
Project Management Software
patrick_spd4u said:
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Click to expand...
Click to collapse
I tried and that did not work. Is there any body who got this working, if not in company settings, what about in home settings??