Database Users

and what if someone (me) can not afford to break anything?

Instaead of Hi I say you are great people
So the case is... I just need to have working Qtek 1010 with SOME additional soft on it inside a ROM...
I've read many pages in this forum and I'm able to find too many ways to change my ROM. I'm totaly confused.
I work for extremaly big worldwide company and they gave me q Qtek, told me to use it, gave me one simple application and web link... so I do.
But the Qtek is much powerfull than that so I need to flash my ROM.
Now comes a question: where can I find one document how to prepare for it, what tools do I need, how to do it... I know after some tries I will be confident enough to do such stuff easlily, my problem is I have only one try, they will make me w trouble if I screw my company recource.
I understand you had milion similar questions like that. Basicly I need help how to flash so I can be sure 100% not less that I can recover in case of trouble. I hope you understand I'm afraid to do it because lack of experience and you are able to tell me if I should try to flash...
or maybe it's better for me to ask my boss to by me a 512 MB SD and install all additional soft on it and stop worring about memory?
I'd appreciate any opinion... you are the best and I'm just new to this bussines...

Get an sd card, backup existing rom to sd card, very easy to do by bootloader method. Enter bootloader by holding down power while inserting stylus in the reset hole on the bottom left of pda then press top right function key, then choose ce to sd. Once you have done this you can check if it has in fact backed up your rom by putting sd card in the pda, enter bootloader, it will then give the option to program the rom, just remove the card and push the reset with stylus again, the other method to check a working backup is to put the sd card in the pda, the pda will ask to format it, say no and remove it. Once you have a backup you can either use xdatools to copy it to your pc or keep it in a safe place, no more files must be written to this card otherwise it will be rendered useless, if you wish to reuse the card sometime it will need formatting. Once you have your backup, go to www.yorch.net, cook yourself a rom and download it in the exe format, this will do a normal install from your pc while connected to pda via activesync, if it messes up you always have your backup. Once you become more proficient at using xdatools you might wish to try out lots of different roms until you are happy with the result, you can go on to sd card flashing which is a much better way of programming rom and much less prone to error because it doesnt rely on a pc connection. I would advise you to leave the radio stack alone, if you can make and receive call ok leave it alone. Have a thorough look around the forum before proceeding. Its good fun to program your pda and you can make it a much better tool, but make sure you always have a way out if things go wrong.

www.yorch.net not working... is there a place like that?
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris

Another ROM Kitchen
Try the following ROM Kitchen http://lumpistefan.dyndns.org/
I noticed that you have the XDAII. Now, someone please correct me if I'm wrong but the directions above and the ROM kitchens are all for the XDA I or Wallaby version.

Re: www.yorch.net not working... is there a place like that?
cchris said:
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Click to expand...
Click to collapse
Chris,
Those Roms are made for XDA1 beware it's not made for the device you have!!!!!!

What's the kitchen for XDA II
THANK YOU!
I was starting on the wrong foot... :-( :?
Anyway a couple of more question:
1) Is there a place like that for XDA II Kitchen? Is my undestanding of what a kitchen is correct?
2) The process for ROM backup outlined above, is still correct for XDA II?
Thanks!
Chris

I'm in the same boat as you CChris. I've been diligently a daily searching through the numerous topics on this site looking for similar information. I haven't found it yet - or at least nothing not-to-super-technical. I do know that you get to the bootloader by pressing the power button, reset button, and down on the toggle at the same time rather than the Wallaby way of the power and reset buttons only. It also seems that there are issues regarding 'country' and that it requires software to get around this. I haven't found the software yet - the links that I've seen all point to "itsme's" website which is currently down.
You can read the thread here: http://forum.xda-developers.com/viewtopic.php?t=9053&highlight=
Hopefully, someone with a lot more knowledge than me can go over updating the XDA II as clearly as cruisin-thru did for the XDA I.

The instructions on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing are correct.
Unfortunately, there was an issue where the wiki removed the ~ from itsme's website's address. It's been replaced with %7e and now the link works.
If you download a ROM from the same vendor as your device (e.g. Qtek ROM on Qtek device, iMate ROM on iMate device, etc.) you don't need to use these instructions, you can just install the ROM upgrade from your vendor.
If you want to use the latest ROM (from iMate) and your device isn't an iMate, you need to decrypt, change the "country" code, encrypt, and then run the upgrade.
You can also edit the extended ROM when flashing, but it's easier to use itsme's extRom Tools. See http://forum.xda-developers.com/viewtopic.php?t=8422
You do NOT need to flash the ROM if you are not experiencing problems, or if you are experiencing problems which the new ROM also has (for example ugly cleartype fonts, which may be fixed without flashing). Flashing the ROM may void your warrantee. You will lose all your data when you upgrade, and you should not restore a backup, only your my documents folder.
If you are a newbie, it may be best not to flash your ROM. If you typed in itsme in google, you would have found his xs4all address as the third link, and would have quickly found out his site wasn't down at all, but the link was just wrong.
Just a warning: the things that could go wrong when flashing are potentially much worse than a wrong URL, and the answer to those problems won't be the third link in google.

NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x

Rabia said:
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Click to expand...
Click to collapse
Rabia can you tell me how did you get out from there?

never got out of it

New Newbie

I just signed up today. I have searched the forums but either I have not found the right information or I may not understand the information I have found.
The Situation
I have acquired a T-Mobile Pocket PC Phone Edition
The Model is PW10B1
Rom Version 3.14.40 ENG
Rom Date 11/26/02
Radio version 6.18
Protocol Version: 324e4
I would like to unlock the phone and use it with Cingular service I already have.
The phone currently has a sim card in it that is active. The person who gave me the phone left it in and has not yet deactivated the service.
How can I unlock the phone using the programs on the site.
I have read several posts but I know little to nothing about Pocket PC or PDA's and I have about the same knowledge regarding GMS technology.
I know people get mad or annoyed when questions are asked that have been answered before on the forums. However, I have searched and found nothing that can help me or that I can understand. I am a quick learner. LOL
Any help would be appreciated.
Edit. I do also have the cradle

http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
This should help.....
or you can try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock
and / or this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
Stefan

Looking at the three options you gave me, i decided to try the Wizard again.
I did not use the 2nd Link in your reply. Partially because I dont have a card reader. The device does have a 128mb card in it.
I did not use the 3rd link in your reply because It seems a bit over my head.
Following the Wizard this is where I get stuck.
(Unlock Wiz/Wallaby/SER/go)
1. Back up your data in such a way that you can restore it to a new ROM version. This probably means you want to synchronize contacts and calendar with Outlook on your desktop, and create copies of the files you need.
1. I i dont have any data on the pocket pc at the moment.
2. Download and install the SpecialEditionROM. It will unlock your phone as a part of the cold-boot procedure.
2. How do i Install this? Do I install it to my pc? Do I install it to the Wallaby? if so how do i install it to the wallaby. Will it matter that I dont have any user profiles created? will it matter that there is a sim chip in the device? What is the "Cold-boot procedure"
3. Synchronize using ActiveSync to get your contacts and calender data back, and copy back the files.
3. Does this step matter for me since I have not information I want to put back on the Device?
Edit. Is this the correct download: XDA-developers-SER-v12.exe
Edit 2. I got it to install the special edition rom, now it asked if I want to unlock the phone now. I said "yes" but I do not know which option to choose.
As I said in my first post I am in the US and will be using my cingular wireless account and sim card. I do not see an option for this.

I am king of all that is old t-mobile pocket pc phones. LOL
I got it to work , thanks for the help. I may start a pay pal account just to donate. This is a great site. now for the acceroies and to figure out how to use the new programs that the rom put in

windows mobile 2003 software

HELLO,
IS THERE ANYWHERE ON THIS SITE WHERE I CAN DOWNLOAD A COPY OF WINDOWS 2003SE SO I CAN REINSTALL IT ON MY SPV M1000.
PLEASE HELP.....................

Hello didgeridooplayer.
First, welcome to the forum!
Second: Please refrain from typing in all uppercase letters, it's considered shouting.
As to your question:
I saw you other post in the Himalaya forum, but I reply to this one because I don't know what causes the camera problem.
I don't think you can solve it by 'reinstalling' the OS. This is not a PC. Windows Mobile is embedded in ROM, and although you can upgrade it (because it's actually flash and not real ROM), to clean up the device hard reset is sufficient.
The OS could not have been damaged by any installed program like it can be on the PC.
Now, I am not sure but there may be a Himalaya ROM on the ftp:
ftp://xda:[email protected]
However, Windows Mobile ROM images are custom tailored to a device. It's not like Win XP where you just get a disk and install it on any PC. It has to be custom made by the OEM for each device.
If you already knew this stuff and my post sounded insulting in any way, I am sorry, I just got an impression from your post that you didn't quite understand the issue.

Windows Mobile n stuff
Hi, Firstly thank you for the reply and secondly sorry for the caps. No you have not offended in any way I am a complete newbie numpty and did not know about the things you mentioned I know my way arround a pc but the ins and outs of PDA's are somewhat of a mistery to me. Anyway the reason my cam did not work was because I did a soft reset before the pda installed all its customisations to get round the password problem and therefore it did not get chance to load its camera software or album etc etc. Anyway I am trying to get the guy who sold it to me on ebay to give me a refund but doesnt look to promising (bloomin Ebay is a pain in the bot) but I will see what I can do.
Thanks again...Tim

Hi didgeridooplayer.
Glad I could help.
If you can't get a refund here are a couple of things you can try:
1) If device was locked by password, hard rest should have cleared it and you shouldn't worry about installing the customization since the password has nothing to do with it (it's just some stuff like cellular provider settings and some extra apps the OEM chose to include). Unless the previous owner changed it.
2) Customization is stored on the 'Extended ROM'. This is part of flash that is normally hidden from the user. However with some registry tweaks it can be unlocked and used like extra storage that will not be deleted during hard reset.
I don't know how to do it for your particular device, but if you look in the WiKi, I think you will find the answer. You can then replace just the contents of the Extended ROM (no need to re-flash the whole device) or just install the camera cab from it. That should solve your problem.
P.S. All installations on the device are done by *.cab files. You can launch them by tapping on the file from file explorer on the device.

Re: Windows Mobile n stuff
didgeridooplayer said:
Hi, Firstly thank you for the reply and secondly sorry for the caps. No you have not offended in any way I am a complete newbie numpty and did not know about the things you mentioned I know my way arround a pc but the ins and outs of PDA's are somewhat of a mistery to me. Anyway the reason my cam did not work was because I did a soft reset before the pda installed all its customisations to get round the password problem and therefore it did not get chance to load its camera software or album etc etc. Anyway I am trying to get the guy who sold it to me on ebay to give me a refund but doesnt look to promising (bloomin Ebay is a pain in the bot) but I will see what I can do.
Thanks again...Tim
Click to expand...
Click to collapse
Hello,
you stoped the proces of customization. in this process device install all aplication from Extended ROM.
Your album and camera, and maybe other aplication are not runnig because they aren't installed.
Just do a HardReset and wait the customization finish.

Beginnings of a Noobie Sticky?

I recently got an i-mate K-Jam after migrating from the Palm OS and found this useful site. Sounds like everyone here is doing some great work. After looking through this site as a guest for the past 2 days I do have a suggestion: someone set up a sticky post with some basic information?
Some initial suggestions:
In addition to the FTP sticky post: ( ftp://xda:[email protected]/ )
Cooked ROMs available/version/developer
Useful programs:
Backup your roms and the directories where they are located
View your rom and extended rom - e.g. Total Commander and the link to download
How-to: backup your rom
http://forum.xda-developers.com/viewtopic.php?t=36574
http://forum.xda-developers.com/viewtopic.php?t=57611&highlight=backup+guide
I haven't been able to find Wizard_Service_Manual.pdf on the FTP site but if you Google that specific file name you can download it.
How-to: backup your extended_rom
Overclocking utilities etc.
I know this post sounds like a noob post but with a sticky post like this most noobs will not have to spend hours/days sifting through all the posts to find some basic stuff before asking questions to which they should know the answer.
Now to my noob question (haha) I haven't been able to figure out: Can/should I update my K-Jam with the new T-mobile mda rom, or will my K-Jam start looking like T-Mobile.
I have a SIM unlocked phone (don't know how to check if the CID? is unlocked?), I like the default theme and colors that come with the K-Jam and WM5, and I'm not with any plan providers as I need to switch sims quite often depending on where I'm travelling.
Thanks,
WnG88

As far as the stickey, that is out of my leauge. As far as loading the new t-mobile ROM, however, it will change to look like T-mobile IF you allow the extended rom to run. The trick I believe is to load the rom, wait for it to boot up. It will show "customizing in 3..." at which point soft reset the device. This stops the extended rom from installing. Now, you can install the extended rom from your other device manually. Before you upgrade your rom, install total commander and use it to copy the extended rom to your pc (based on your previos post I am assuming you know how to do this...) Then once your new rom is up and running simply copy all of the cab files to your device and run them (by going to them in file explorer and clicking on them...) You can also customize by only installing what you want from either rom. Or, a more advanced way to do it would be to create your own rom with its own extended rom, and load that, but that is harder and more technical I believe. Also, it is easy to change the theme of the device, to whatever you want. I use ThemeGen CE on the PC and Schemechanger on the ppc to tweak colors, both are freely available on this board somewhere. If changing the theme is all you want this is much easier, the reason that I would install the other extended rom is for the custom stuff, for example it auto installs t-mobile network ect... However since you change providers all teh time you probably know how to change most of this anyway, and so it may not be as big of a deal to you. So you know, I have T-mobile and I am running the 2.26 ROM, and although I have only had it for a day or two, I like it. Let me know what you decide to do, or if you have any more questions, want to know about the best (In my opinion, of course!) software or settings, ect... Also, sorry for rambeling so much

Thanks for the reply Starcruiser, I'm still doing a bit of reading on the ROM portion of stuff before I do anything. As for keeping track of searches and not having to spend hours trying to repeatedly find the same topics I'm pasting the following useful link as backup info:
http://forum.xda-developers.com/viewtopic.php?t=37386&postdays=0&postorder=asc&start=0

WnG88: we're trying not to litter the forum with stickies.
We have the Wiki for a much more effective way to distribute this kind of info.
Set up a wiki page, and I'll sticky your wiki if you want
PM me if necessary.
V

Wifi blocked by Orange (France)

Hi there.
I've just bought a Touch 3g with Orange in France, and even though the box has WiFi written all over it, it appears that I can only connect to Orange WiFi hubs. I have a different hub at home and would like to know whether I can unlock the WiFi function so that it is free to work with any WiFi connection.
I've had a look on here and can't find the answer to my question. I apologise in advance if I've missed the thread somewhere.
Thanks for any help you can give me.
PS - As someone new to this geek lark, I'd also be interested in knowing what programs I really ought to install onto the phone. You're top 5 programmes if you like.

The orange branded phones (if they are the same as the uk ones) have the unique manager not the standard wifi one. So even if you have an orange wifi hub you still don't get a wifi connection (at least not one you can do anything useful with)
Unique is a wierd orange version of voip.
The only way of changing it (i think) would be to flash a new rom to the phone.

Hi,
I got a French Orange phone too that I have flashed to non-Orange ROM, so Wifi works OK.
For programs I would recommend SBP Mobile Shell to replace Touch Flo, and TrackMe to have fun with the GPS ( I find it awesome).
Bonne chance

TrackMe does not work on my Jade (.net 3.5 installed), but I can recommend GPS Cycle Computer as well. Supports a lot of data formats, check the link or the xda-dev-thread for more information.

Thanks very much for all your help. I'll have a look at flashing the ROM and will give that a go.
Is flashing Rom a particularly complicated or potentially phone breaking experience? It's my wife's new phone, and I don't want to live with an angry woman whose phone no longer works

DaM79 said:
TrackMe does not work on my Jade (.net 3.5 installed), but I can recommend GPS Cycle Computer as well. Supports a lot of data formats, check the link or the xda-dev-thread for more information.
Click to expand...
Click to collapse
Did you install SQL Compact framework as well ?

Billy Ze Feesh said:
Thanks very much for all your help. I'll have a look at flashing the ROM and will give that a go.
Is flashing Rom a particularly complicated or potentially phone breaking experience? It's my wife's new phone, and I don't want to live with an angry woman whose phone no longer works
Click to expand...
Click to collapse
No it's not complicated ; yes is very much potentially phone breaking
FYI I flashed HardSPLv3 on my phone (see Jade ROM forum) , downloaded the kitchen (idem), built a ROM using htcrt (in the kitchen) and the OS.nb found here http://www.planete-htc.com/index.php?mod=forum&ac=voir&ref=20&cat=220&id=18955, and flashed it. And tada, a stock french phone with wifi access.
Your SPL/ROM will degrade from 1.7 to 1.4 though.

OK. Thanks Gomi. I'll have a look and see if I really want to risk it or not.

Hello @ll.
I have a french Orange Jade too.
The UMA radio ROM make me sick !
But for me, the HardSPL does not work... The RUU progressbar still blocked at 0%.
fyi : I have the SPL 1.71.000 version.
Concerning the HardSPL, i'm not using the original exe, because of the unavailablity of the "server". I use an extracted nbh file of the HardSPLV3.
Any idee ?

fyi : because of specifity of the RUU used to flash the HardSPL, you can not use an another RUU to flash it.
With luck, the HardSPL setup exe have found the server, and now, all is ok !

Hi mate and welcome to the slippery slope. I only have Dad to convert now...
There may be another way to prevent the Orange rubbish crippling your phone - when you do a hard reset your phone will give you three seconds after the first boot-up before it begins to customise the ROM with all the operator-specific stuff. If you do a soft reset within those three seconds you prevent the customisation. If the crippled WiFi is part of this customisation then you'll end up with the default Windows Mobile WiFi manager. This trick used to work on my Universal and my Elf. You can experiment with many hard resets until you get it right.
Having created a vanilla Windows Mobile system you may need to fanny around unlocking the extended ROM and cherry-picking the customisations that you do want (such as the GPRS connection data) but this effort might be worth it to have an unbranded phone.
Flashing a new ROM will almost certainly invalidate your warranty.
(Oh, and a hard reset will wipe off all your data of course.)

Thanks SiliconS.
Have tried that and I don't get the 3 second warning. I just get a message saying that this will wipe the phone (hard reset) and asks me to press 'enter' to continue (which I obviously do). It then tells me:
Format FAT partition
FAT partition complete
before carrying on with all the Orange stuff. Have tried randomly pressing soft reset at various times, and all this does is turn the phone off...
Thanks anyway though.

That's weird. In that case Orange must have embedded their rubbish within the fundamental ROM rather than the extended ROM like everybody else does.
Flashing a completely new ROM may be your only hope, Luke. HTC have released an official ROM for the Jade that surely wouldn't invalidate your warranty...
http://www.htc.com/www/SupportDownload.aspx?p_id=174&cat=2&dl_id=537

I think an official ROM update could be the way forward yeah. I'll have a look this weekend maybe.

for the benefit of people who may be subscribed to this thread, I think I have found a fix for the orange rom using data connection instead of wifi, read on here:-
http://forum.xda-developers.com/showpost.php?p=4517074&postcount=12
post back to that thread if it works for you!