New Newbie - MDA, XDA, 1010 Software Upgrading

I just signed up today. I have searched the forums but either I have not found the right information or I may not understand the information I have found.
The Situation
I have acquired a T-Mobile Pocket PC Phone Edition
The Model is PW10B1
Rom Version 3.14.40 ENG
Rom Date 11/26/02
Radio version 6.18
Protocol Version: 324e4
I would like to unlock the phone and use it with Cingular service I already have.
The phone currently has a sim card in it that is active. The person who gave me the phone left it in and has not yet deactivated the service.
How can I unlock the phone using the programs on the site.
I have read several posts but I know little to nothing about Pocket PC or PDA's and I have about the same knowledge regarding GMS technology.
I know people get mad or annoyed when questions are asked that have been answered before on the forums. However, I have searched and found nothing that can help me or that I can understand. I am a quick learner. LOL
Any help would be appreciated.
Edit. I do also have the cradle

http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
This should help.....
or you can try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock
and / or this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
Stefan

Looking at the three options you gave me, i decided to try the Wizard again.
I did not use the 2nd Link in your reply. Partially because I dont have a card reader. The device does have a 128mb card in it.
I did not use the 3rd link in your reply because It seems a bit over my head.
Following the Wizard this is where I get stuck.
(Unlock Wiz/Wallaby/SER/go)
1. Back up your data in such a way that you can restore it to a new ROM version. This probably means you want to synchronize contacts and calendar with Outlook on your desktop, and create copies of the files you need.
1. I i dont have any data on the pocket pc at the moment.
2. Download and install the SpecialEditionROM. It will unlock your phone as a part of the cold-boot procedure.
2. How do i Install this? Do I install it to my pc? Do I install it to the Wallaby? if so how do i install it to the wallaby. Will it matter that I dont have any user profiles created? will it matter that there is a sim chip in the device? What is the "Cold-boot procedure"
3. Synchronize using ActiveSync to get your contacts and calender data back, and copy back the files.
3. Does this step matter for me since I have not information I want to put back on the Device?
Edit. Is this the correct download: XDA-developers-SER-v12.exe
Edit 2. I got it to install the special edition rom, now it asked if I want to unlock the phone now. I said "yes" but I do not know which option to choose.
As I said in my first post I am in the US and will be using my cingular wireless account and sim card. I do not see an option for this.

I am king of all that is old t-mobile pocket pc phones. LOL
I got it to work , thanks for the help. I may start a pay pal account just to donate. This is a great site. now for the acceroies and to figure out how to use the new programs that the rom put in

Related

Announcing the XDA-developers Special Edition ROM

We've all worked hard, but it's done. The
XDA Special Edition ROM v1.0
is ready for release. Click here for details.
Way good job.
Ill give it a try we I get a linux machine runnig.
any change of getting som kind of windows version ( I no this will be heard because you use dd for file manpilation).
Just keep up the good work and I let you know if I have got a rom in my machine 8)
Download it here !!!
Only yesterday I wondered what I could do for this community, and today's already my chance !
I followed the instructions for mkrom, got Othman's Qtek ROM to modify, and got a working ROM image, pretty much first try. It is way cool, and does everything promised on the page. I created a self-extracting archive that runs adaptROM and then the "Programme A" thing, so people don't need to build it anymore, they can just download it and flash their device..
http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v10.exe
(The machine I'm on can handle quite a bit of traffic, but there may be other reasons why mirrors wouldn't be bad...)
Should work on all existing PW10A and PW10B devices. Please note that installing on U.S. 900/1900 phones (PW10B) carries a warning on the page.
Happy downloading. It's cool. Back up your stuff and install the new ROM today!
--
Jeff
Thnx Jeff Summers.
Your installer worked like a charm.
I will also create my onw rom with my onw boot sreen :wink:
Thanks XDA-developers and thanks Jeff
Chiani
.Net Compact Framework
Hi !
is there a way to include the .NET Compact Framework in your ROM?
How about SMS_Name, sms-fix?
Thanks for your work
auto-config is not working
Hi !
I used Jeffs exe to install the ROM.
Everything worked fine, except the Auto-Configuration.
It pops up every time i boot my device and does nothing. I answered the questions and choose reboot, after the reboot there are no settings in connections and next time i connect to the gsm-net it asks again to do autoconfig.
I used the ROM on my german XDA32 with O2 (not loop).
Radio-Version: 4.16
am i doing something wrong or is it a bug?... Jabba
Re: auto-config is not working
Anonymous said:
[...] I answered the questions and choose reboot, after the reboot there are no settings in connections and next time i connect to the gsm-net it asks again to do autoconfig. [...]
Click to expand...
Click to collapse
You should be able to just select 'Do not ask me this again' once, and that should be the end of it. I decided to leave the option to the user because I figured some people like being asked every time they switch SIMs. But maybe I should take it out on future versions.
Let me know if you can't make it go away by selecting the checkbox, and I'll look into it further.
Re: Download it here !!!
http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v10.exe
(The machine I'm on can handle quite a bit of traffic, but there may be other reasons why mirrors wouldn't be bad...)
I just posted it on use-net in alt.binaries.warez.pocketpc
Look for XDA developers romupdate.
One possible way to make the ROM image on Windows is to use CygWin. It's worked for me.
yes, the autoconfig goes away when i check the box, BUT i tried 3 times to let autoconfig do its job -> nothing. no configuration was done. finally i checked the box to make it go away. now i have to config the connections manually.
autoconfig does not work, it just says "you need to reboot" immediatly. and after reboot nothing changed. no config done. like i already said, i tried it 3 times.
am i the only one who is experiencing this?
a few questions:
- is the autoconfig dropdown empty? or does it contain a list of providers?
- dou you have an sd card? and a reader connected to your pc?
if so, can you write a rom image to sd, and save it to your pc disk
using xdarit,
and also use xdarit to write the NK.nbf (that can be found
in C:\Program Files\RUU\English) to sd, and then read
that sd image back to your pc, ( this is to convert the .nbf to .nb1
if you know how to use unix tools, you can also do this by
typing 'dd if=nk.nbf of=nk.nb1 bs=32 skip=8193' )
then compare those 2 .nb1 files.
they should be equal. if they are not, you should try to flash
your xda again, using the sd card you have now with the saved .nbf on it
that is more reliable than flashing using programme-A.
Thanks xda-developers AND the Jeff Summers who complied his ROM for US. Three PLAIN question
1) I'm happy that the 02 boot screen is gone but can I wool rather a non boot screen can your standard one be removed manually if not can you make this optional in the next version
2) Would I be able to reload the original ROM on the XDA i have to return to manufacture for servicing i two weeks
3)A minor Issue I i notice a square while mark in the top right corner appears sometimes is that know problem in the ROM.
Itsme: sorry i dont have a sd-card reader/writer. The dropdown menu is not empty, everything is there. i selected o2-germany.
btw: is the sms-fix in the rom too? sms-name i mean. is there any chance that there will be a german rom too?`
And there is one freeware tool written from a user at a german xda forum. it's an sms-char-counter (which is missing in PPC2002) it would be a good idea to add this too the ROM?!
the other guest: use the wallaby boot loader (reset with power-button pressed) to write your ce+boot to a sd card (this card will be overwritten completely!!) see the guide on this website.
the square mark is a very useful tool called 'switch', tap it, you will see.
you can download a rom that is official for your xda here
( that is assuming you are the person called 'guest' with the german o2 rom )
if you take a look at mkrom you will see how to modify the Special Edition rom to your needs.
Itsme: do i just have to change the dir-structure ? ie. program files -> programme etc???
This 'Guest' stuff is beginning to get to me. At least provide some identification, please. 'Guest', are you sure Autoconfig does 'nothing', it may be that it has created the GPRS settings, which i all it should do, we removed all the other crap it used to do. If it created no GPRS settings for you, I'll check the 'Germany - O2' file to see what's up...
Itsme: sorry i logged in with my last reply but forget to enter the username at the top of the reply (now i know there was some login error, otherwise the username-textfield will not be displayed).... i hope that i'm "in" now
in settings/connections there are no settings set for internet and work! "new" is the only item to select.
i tried that auto-config again, but still no settings...
sorry again for the "guest" stuff.
Jabba
XDA developer Itsme
I was the Guest who mention the boot up after reset. I will be returning my XDA for services soon. Can i reload the original back with no problems? I had XDA 02 UK Radio Unit v31413 AND Radio Stack v4.
i notice the XDA developer SP Edition ROM Version date is 03/10/03 are we head of time??????
the boot up after soft rest (XDA developer bootup') i look at the instruction i have very little knowledge to follow the instruction (i'm a newbie). Any simple suggestion
it should be no problem to change your rom to a previous version
you can download the official o2 rom here
your radio stack was not modified by the special edition rom, so no need
to change it.
the date, mmm. not sure which of the digits is the month day or year.
I don't think I understand what you are trying to ask with your other question. ( or even if it is a question )

ROM upgrade help

I wanted to install one of the ROMs from www.yorch.net. But before doing so I have some questions:
1. If I choose to build ROM as an installer.exe, is installing it to my device as simple as running the .exe file? (of course with the device connected thru Activesync)
2. Is my present ROM (see specs below) supported?
3. If Murphy comes to visit and I screw up, will my phone be completely unusable or can I just reinstall old ROM, do hard reset and everything will be back to how it was?
My specs:
OS: Pocket PC ver 3.0.12039
ROM:3.20.06 ENG( 07/30/03) (O2 Asia I think since I bought it here in the Philippines)
Radio: 4.21.00.
Thanks
1 as far as i know yes havent don it to my own device yet though
2 a rom dont have to support a rom since it'll overwrite it
3 of cause merphy can also show his ugly face
but if all fails a sd flash reader writer can save many a tears
also if your phone is working ok then i would not mess with the
radio stack and beware because some roms include the radio stack
and if you try to update your radio stack to a US (900/1900) and you network is 900/1800 you could be in for a world of pain
ROM upgrade step by step
OK I'm really dying to give it a go but I'm just a overly cautious bloke. So I'm gonna outline what I interpreted (after reading lots of posts I think I'm getting it but not sure) to be the way do the upgrade. Please correct me if i'm wrong:
Equipment I have:
1. My notebook (Windows XP, Activesynch 3.7)
2. O2 XDAI
3. Cradle and USB connection.
Steps that I think I should take:
1. Place XDA on cradle and make sure it's connected with PC.
2. Backup?? (not so sure what to back up since contacts, calendar, notes are synched with outlook, docs are also synched, I have copies of cab and program files since I download them to PC before installing them to XDA.) If i'm missing something please slam a frying pan (this is a kitchen right?) on my head.
3. Go to www.yorch.net, check mark on all appropriate options, then (since I have to Unix box and dont know Unix at all) just go for the easy option of cooking the .exe install file.
4. Assuming, the .exe is downloaded to my PC. This time I just run it. I expect this to be just like installing PPC apps. If not, throw a tomato on my face
5. Assuming everything worked and Murphy's in the Arctic freezing his A**e off, then all I do now is hard reset.
6. I have a new ROM and I'm singing happy-happy-joy-joy.
To the wonderful people at xda-developers, am I in the right direction or am I as lost as Bill and Ted? If I'm lost, is there a step-by-step guide for non-unix programmers? (Sorry, there was a sticky but I thought it was for people with Unix boxes)
Once again, thanks for all your help and your patience.
2. Backup?? (not so sure what to back up since contacts, calendar, notes are synched with outlook, docs are also synched, I have copies of cab and program files since I download them to PC before installing them to XDA.) If i'm missing something please slam a frying pan (this is a kitchen right?) on my head.
Click to expand...
Click to collapse
well i can think of one thing to backup and thats your current rom
so if you dont like the new rom you are getting you have the option to go back
of cause if the rom you have now is downloadble from a place you know like your isp then maybe it dont matter
Thanks for the reply. That's a good point. Question: When you back up old ROM, is it just the ROM that gets backed up or is it the whole content of the device, like how you do in PCs?
Also, since no one, besides you, has made any comments regarding the steps that I outlined, is it safe to say that they are the correct steps?
Thanks
When you backup your ROM, no stuff that you customised will be in the backup - the backed up ROM will be the same as when you received it from your retail shop, or if you upgraded, it will be the upgraded ROM without any of your stuff. Do a backup and store it on your hard disk.
DON'T use the .exe cooked ROM, use a .nb1 or .nbf, and use XDA Tools from this site to do the upgrade. It's very easy that way, and less dangerous. Don't upgrade your radio stack unless you know exactly what you're doing, or your phone supplier has made an update available just for you.
If you use a T-Mobile ROM above version 4.00.05 it blocks the XDA-Tools from updating the ROM. At that point you need to use XDARIT (from this site) to low-level write the ROM image you have onto your SD card using an SD card reader which shows the card as another drive on your computer. Once you do that you need to boot into the boot-loader (press the reset button while holding the power button) and follow the prompts to restore from an SD card. If you're unlucky and are running bootloader 5.17 (or above I think) you need to write the bootloader diagnostics patch (wallaby patch from this site) onto your SD card first before doing the boot into the bootloader thing. You can then remove the SD card, write the O/S ROM onto it with XDRIT, and put it back into your phone while it's still sitting on in diagnostics mode. Then you can restore from the SD.
It sounds complicated, but it's easy, as long as you have an SD card reader, and as long as you don't mess with trying to update the bootloader or do an unknown radio update. There's lots of info in these forums if you get stuck.
I made a thread that summarised all the steps using the new tools and ROM's at this address : http://xda-developers.com/phpBB/viewtopic.php?t=3860. It's for Asian/European users, but if you are in the US the instructions are the same, except instead of using European 900/1800 radio you use 900/1900.
Further questions on ROM update
Thanks. It's becoming clearer and clearer. Have more clarifying questions:
1. How do you know whether or not you're including the radio stack with the ROM upgrade at yorch.net. I did not see any options there.
2. At www. yorch.net, nothing happens when I press the "Build ROM Now" command button. Is the download supposed to happen in the background or is there something wrong with my PC or the site?
3. I dont think I'm using the T-mobile ROM but how do I know if I'm runing bootloader 5.17? Is bootloader 5.17 only for T-Mobile users or all?
Once again, thanks for the help and bearing with a newbie.
2. At www. yorch.net, nothing happens when I press the "Build ROM Now" command button. Is the download supposed to happen in the background or is there something wrong with my PC or the site?
Click to expand...
Click to collapse
it should start to write some text about the progress of making the rom
and when it's finished then it should init a std download dialog
The meter down at the status bar does move, same as when you're loading a webpage, then it says Done. That's about it. Didnt see any other messages or dialogue boxes.
Can anyone confirm if it's up today or has it been down?
Thanks
PS. Tried to email using the email utility at the website but getting errors there as well.
OK, firstly to answer your question about Yorch's site... well it worked for me in getting all the ROM's I wanted, then when I went back again the download didn't work. I guess it's just on and off, so unless Yorch finishes getting married or someone else makes another kitchen it's a matter of pot luck. You can get away without using the kitchen if you can find another download source for ROM's, whether it be FTP or whatever. Just remember if you get an exe you can usually pull it apart with winzip to get the .nb1 or .nbf out of it.
Now, for Q1 :
An operating system ROM is generally just under 32MB, but when zipped from Yorch it's usually about 14 or 15MB - the operating system ROM will NEVER be smaller than that. I'm not sure about the exact radio stack size but I know it's a lot less than that. Also, doing some homework about the operating system ROM helps. eg. reading about the 4.01.00 ROM tells you that it's not a radio stack upgrade, it's an operating system upgrade - and the filename and the size of the file you receive reflects that.
Q2:
answered above...
Q3:
I think the bootloader is just pot-luck depending on when you phone was released. To check your bootloader it will reset your device completely, but I read somewhere that if you turn the radio (phone) off it doesn't hard reset. If you're worried, do a full backup first. But basically when you're ready to look, reset your phone while holding the power button and it will tell you the bootloader version. Don't be too turned off by that, I have read that SD card readers can be picked up very cheap if you look around, and that's all you need to get you out of trouble regardless of the bootloader version.
There's no real risk (but I won't guarantee anything), just make sure your phone is fully charged before mucking about with SD upgrades. Also make sure the radio (phone) is switched off before upgrading... using the bootloader/sd card method you shouldn't need to be concerned. I'm not sure what effect having your phone on and receiving a call while using XDA-Tools can have, but someone did mention it somewhere.
I'm a newbie too, but there's really not much you need to know, just a few caveats.
Yorch's Kitchen has been working OK for me the last couple of days. It takes maybe about 5 mins to "cook" before telling me that the ROM is ready. The 4.00.05 ROM gave me a lot of ActiveSync problems, so I went to the 4.00.16 ROM tonight and it looks like it's behaving better.
My SD reader is a Microtech Zio. It appears as a disk drive in windows, but the newer XDArit can't initialize a connection to write to the SD card. I used the "dangerous" older version of XDArit instead (available on Yorch's site), and it's worked OK for me (so far?).
One thing I wish I had realized before I started playing - going into the bootloader will reset your phone most (some?) (all?) of the time.
While I was flashing the ROM tonight I could see the GSM light flashing - I had the same "hope no one calls" feeling tht others must have had. Note that this was while I was flashing from an SD card in the bootloader - so apparently the process doesn't deactivate the phone while it's ongoing.
Muchas Gracias!
Ebswift, if ur a newbie then ur the god of the newbies. Thanks for all the help and for making me see the light. Much appreciated...
A quick Q:
Is the process for installing an .nbf file the same as that for installing an .nb1 file?
I have cooked a few ROMS to an .nb1 format and installed those OK, but now I have one in .nbf that I'd like to install.
So what I'd plan to do is put the nbf onto an SD card using XDArit, and then stick the card in the PPCPE and reboot to the loader. Is that it?
So what I'd plan to do is put the nbf onto an SD card using XDArit, and then stick the card in the PPCPE and reboot to the loader. Is that it?
Click to expand...
Click to collapse
You can do it that way (onto the SD card), or if you're not already using a T-Mobile ROM you can use XDA Tools which is easier. Basically the capabilities are spelled out for you with the available file types in the drop downs when you select a source.

SIM LOCK

HELP .. HELP .. HELP ..
I know this subject is old but I could not what I need & how can I fix it
I have bought a pocket pc with phone edition from USA, and when I tried to insert my SIM card it asked me to but my PIN code, then ask me to but the unlock code (SIM code).
Now I am in Saudi Arabia.
WM2003
ROM Versino: 4.01.16 ENG
ROM Date: 02/04/04
Radio Version: 6.25.02
Protocol Version: 324e4
NOTE: I do not have a serial cable.
Thanks,
HFN[/b]
Check this: http://wiki.xda-developers.com/wiki/UnlockWiz
Hope it help you
Edit:
You have a WM 2003, this link work only for PPC2002
SIM Lock
DariusVE
Thank you for your help, I have tried this site, but It did not work because my device using WM2003 and also has no Wireless Modem feature.
Thank you.
Unlocking Quest
Here's my quest to unlock my T-Mobile PPCPE. I think some of this information might be useful to anyone confused about getting this
done.
First I called TMobile to request the unlock code. Since my account was up to date I figured no big deal right? WRong. My IMEI (or TMFT) number was not in their database so they could not give me an unlock code so they said. They told me to call the manufacturer of the device which they said was Microsoft. Knowing full well this was crap I called anyway.
The support guy got a good laugh; MS does not make devices
like this, they only provide the OS. He recommended I call Siemens.
So I did. Real nice guy named Jack had a good laugh as well. Not only could Siemens not tell me who really made my device (a third party made them for T-Mobile) but even if they had unlock codes they could not provide them because of contracts with TMobile. So I go back to TMobile.
The support people felt really bad about the run around and escalated really high up the chain (or so they said). AFter 48 hours I decided to take my own course. Having had good luck unlocking a Treo 600 through 'alternative means' I figured time to tackle the Pocket PC Phone Edition.
This was MUCH different and much harder to figure out.
After a good 12 hours and a whole slew of reading I finally figured out some stuff. Most of this may seem a no-brainer to some of the more educated XDA people out there but for us newbies maybe it will help.
----------------------------------------------------
The PDA side of the ppcpe and the radio/phone/gsm side are two totally different animals (not a surprise to some). When you refer to the 'operating system' you're talking about the ROM
like the XDA Developers special edition or any of the ROMs from the ROM kitchen at http://lumpistefans.dyndns.org/. The Radio or RSU (for Radio Stack UPgrade) is totally separate from this. The other variable is the bootloader version (Wallaby in my case).
Now my goal was just to use the XDAUnlock program. When I ran the program right from the defaults I got 'error getting unlock code.' All the posts I read said put on the special edition rom and you'll be fine but that did not do the trick. Still got the same error message.
Here's what I started out with:
ROM: 4.01.16 ENG
Radio: 6.25.02
Wallaby booatloader: 5.22
What finally worked:
Radio: 6.24.00
ROM: 3.17.03 ENG (xda special edition)
then upgraded bacdk to 4.01.16 ENG
Wallaby boot loader 5.15
How I did it
--------------
I meandered my way through this to eventual success and since the dratted device now works fine I'm leery about putting it all back to the old way and doing it all over again. Therefore use this process as a guide only, not a definitive instruction set. Also I walked through this as a troubleshooting exercise so some steps may not have been necessary. I eventually succeeded but maybe went the long way around to do it.
References
----------
- Bootloader utilities: Get to this by holding down the power button and pressing soft reset. You may have to hit the contacts button to get into the menu if you don't see it right away (like if you see a simple GSM OK message at the bottom of the bootloader display.
- Cold boot: the reset swtich on the right side bottom of the device with a picture of a red battery with an \ through it. This disconnects the batter from the mainboard and trashes all the data on the device except the Operating System in ROM.
What I grabbed
------------------
- XDATools
- XDARit
- ActiveSync (I used 3.7.1) and connection by USB cable
- Wallaby bootlolader version 5.15 files
- XDA Developers Special Edition ROM
- RSU 6.24.00 files
- XDAUnlock.exe
- SD Card (mine is 128 MB but I think as long as it's bigger than 64MB or your current memory in the device you're OK)
- pnewbootflash_40116.exe
All of these files are available here on xda-developers.com, just
search for them.
First back up everything. Not just using the sda backup tool, from the boot loader. You can do the SDA backup if you want, consider it backing up your data. You can also do the ActiveSync backup if you want to save your data. In my case all my data is stored in Domino so I don't
give a hoot about the data on the device. Your mileage may vary!
Second I'm doing ALL of this with no SIM chip in the device. THis may or may not be necessary.
Stick your SD card into the PDA. If it complains about wanting to format it go ahead and let it format the card unless you have stuff on it you want. I'd recommend dropping anything you want from the card onto safe media and just working with it as a blank the rest of the way through because it's easier to just wipe the card in between some steps.
Go to the bootloader utilities. Hit Contacts button and you'll get the boot loader option stuff. If the bootloader utilities you get to right away takes you to a menu with things like Boot+CE-->SD then you don't have to worry about hitting the contacts button. You only need Contacts button
if when you get to the bootloader screen you see nothing more than
some nice colors, the bootloader version and "GSM OK" message.
Take the Boot+CE-->SD option to back everything up. This will take a few minutes.
Once it's done pull the SD out ofthe ppcpe and stick it into your SD card reader.
Bring up xdarit and chose your removeable device.
If you have more than one MMC slot select the different ones until you get one that says 'wallaby' in the hex codes at the bottom of the XDARit screen. You'll be writing out two files, the first is the NB0 file (which is the bootloader) and the second is the NB1 file (which is the OS or ROM). Name these something like original.nb0 and 1.
Wipe the SD card (format FAT).
Stick the SD card back into the pda and soft reset, then cradle it.
Go to a DOS prompt and CD to where you put 'pnewbootflash_40116.exe.'
Type 'pnewbootflash_40116 nbl515.nb0' to write the wallaby 5.15 boot loader to the device. If when you downloaded the 5.15 bootloader you called it something else (like 'wallaby_boot_loader_V5.15.nb0'
you should of course use that name instead!
The output looks like this:
D:\XDAtools\binaries>pnewbootloader_40116 bl515.nb0
Copying D:\XDAtools\binaries\itsutils.dll to WCE:\windows\itsutils.dll
in FindFlashInfoOffset
protection found at 8c0d60f8
result: 00000000 00000000
Now..why did I downgrade the bootloader? At this stage I'm troubleshooting why I get the 'error getting unlock code' message running XDAUnlock. I've got three variables I know of, bootloader, ROM and Radio Stack. I chose to start with the bootloader because
some posts out there say boot loaders 5.17 and higher have some checksum that keeps certain ROMS from working properly. Perhaps if I'd started with the radio stack I'd have been done right away and saved a few hours but all the posts about possible device destruction made me start with the bootloader! Again, your results may vary!
Next I changed the ROM to the XDA Developers special edtion.
Make sure the SD card is in the PDA and cradle it.
Run OSIMagetool and load the ROM file in the first box, chose SD Card in the second box.
If you downloaded the special edition ROM you might
have some luck using the Installer that comes with it but apparently that
does not work with ActiveSync 3.7.1. I got messages that said it could not access the device or no connection etc. Instead I used OSImageTool to load the NK.NBF file included in the distribution. Note that to get to this file you DO have to unzip the EXE file you download!
Once complete pull the pda out of the cradle.
Hold power+soft reset to get the boot loader menu. This should show up as 5.15 now. It will automatically detect that the SD card contains a ROM that can be flashed to the device. If for some reason it does not automatically detect this maybe you have to hit Contacts. I did not have
to do that, it just told me to hit Action to download the ROM.
Hit Action button (aka the jog button) to write it to the device. This will take a few minutes, go grab a beer or two or three. I took the safe route and connected power to the device while writing the flash.
Once it's finished cold boot the device. I waited 2-3 minutes before re-engaging the battery.
Here's a gotcha. On the right side of the SIM there is a little switch. If the rubber door for the sim is not totally closed you can't get the device to boot. This switch is real small so it's very possible to miss it. You can see it fine if you take the back off the device (which I determined from a post here that told you how to get the battery out).
When it boots you should have the 5.15 wallaby booting the xda special edition. Follow the instructions to calibrate the screen and you're ready to move on.
Now if the radio is 6.25.02 xdaunlock won't work, it just generates the 'error getting unlock code' message. You have to downgrade the radio to have this work.
There's lots of posts around here that say don't screw with the radio because if it errors you've got a fried device. I imagine this is true so balance how bad you want to unlock the device against the possibility of totally frying the device. I've done two radio upgrades in my life on the PPCPE, both were OK but again, caution is advised.
Grab the 6.24 radio zip and unzip into a folder on your computer. Use activesync to copy the files to \windows on the device.
Execute the rsupdate.exe program to reprogram the radio to 6.24. WHen completed soft reset the device and go into start-settings-system-device info to make sure you're at 6.24 radio vesion.
Copy the xdaunlock.exe to the device and execute. It should say 'you're device appears to be SIM Locked, would you like to remedy this?" click Yes to unlock the device.
Now the device is unlocked. You can change the ROM to WM2003 now if you want (which I did). I imagine you can re-upgrade your bootloader
and radio stack if you want but I'm leaving well enough alone for now!
Hi ALL
I did unlock my phone thank you all.
Spicial thanks to "rhodwyn".
Best regards.
Works!!!
Thanks !!! Its working!!!
help in getting all the files needed....
Hi,
I would like to try this.... but where can I get the file pnewbootflash_40116.exe? Or is this a file that I'll create?
rhodwyn,
I would appreciate some help in getting most of the files.
Thanks in advance.
It worked for me too, thanks for the great solution, rhodwyn!
Thank you rhodwyn and everybody... my 2 cents
I love this site and I think that everybody does a great job. I found rhodwyn’s post to be very comprehensive and it is the one that ultimately helped me out this time. I don’t know if anybody is even interested anymore, but since I’ve been helped, I figured that I’ll try and help someone else. I assume that you’ve already read rhodwyn’s post.
I had the same starting configuration. I did everything that he suggested except for changing the bootloader and it worked perfectly. So, as he suspected it was enough to downgrade the radio stack and to load the special edition ROM. I subsequently upgraded my ROM and all is good (although I haven’t upgraded the radio stack and I’m not sure if I will).
I’ve read other posts about problems downgrading and upgrading the RSU and the 1% problem… I had a problem the first time I tried and I became very nervous, but I looked at rhodwyn’s post more closely and placed rsupdate.exe into PPC’s \windows folder and tried it again and was successful.
thanks
rhodwyn
10 minutes and done

Can anyone help figure out how to get back smart dial?

Hi guys,
First of all, I'm really new to this(learning all the time!) as I just got my O2 mini 2days ago from ebay.
I have a problem whereby my phone doesn't have smart dial function. I've spent hours reading the threads and trying but to no avail.
Can anyone kind ppl out there help me pls?
FYI, under "device information/version/ExtROM version" section is BLANK. Is this normal?
Really appreciate anyone that can help me out. Thanks a lot!
You can download and install the cab file attached.
Thx Zerimar!!!
But I toy around more with my phone I realise that my phone doesn't even have the ExtROM installed at all! That's main culprit for those missing functions. I don't even have MMS function installed
Can you kindly share with me a complete ExtROM that has all the preloaded softwares?
And also can you give me so simple instructions on how to put back the ExtROM in the phone (I'm really new...)
Again, really appreciate your help!!! Thx man....
I suggest that you keep your Mini the way it is (with BigStorage ROM). The advantages are;
1. You can choose which customization software from O2 to install.
2. 27MB is gained for installing 3rd party software, ie. Navigationi softare, Destktop enhancements, etc.
Before you upgraded your Mini, did you keep a backup of the original ROM and/or the Extended ROM? If you have a backup of your Extended ROM then all you have to do is to copy the .CAB files you want to the SD card, main memory, or storage and to install the .CAB files just click on them from where it was copied to.
If you don't have your Extended ROM backup, then I suggest you go to this forums ftp or wiki and download what you need. I don't have the complete Extended ROM .CAB files since I only keep what I like/need. Secondly, my unit is a generic since here in Switzerland we can buy the units without any contract, or when we renew our contract, we can get a new phone but usually it is a generic model. Out of the 3 providers here, only Orange SIM locks and makes customization to the units.
If still you prefer to put your Mini back to its original form, then all you have to do is to flash your Mini with your ROM backup (if you have it), otherwise download from the ftp any of the latest ROMs available.
Very good advice here.... makes me understand more now.
Ok, I agree with you to keep it's current status now.
I did not upgrade my mini, I bought it new from ebay, thus there is no backup ROM or ExtROM available.
I'm not able to use this forum's ftp. This is how I try, I paste below link in IE,
ftp://xda:[email protected]/Magician
user:xda
paswd:xda
I'm denied access. Any idea on this?
Thx...
by the way, Switzerland is really a nice & beautiful country... Love it!
In your first post you mentioned that "device information/version/ExtROM version" section is BLANK, this somehow indicates that the Mini is configured with BS.
Check using File Explorer or via Active Sync. If you see a folder called Storage from My Device via File Explorer, or My Pocket PC via Active Sync then it's configured with BS. The other way to find out is to do a hard reset by pressing (and keep pressed) the Camera+Power button while pressing the reset switch. Note: This will eventually erase all your data. Be sue to backup first. If you did a hard reset, then at some point in time you will see that something is being installed automatically, meaning no BS.
For more info and guidance, check out the following threads contributed by very generous and dedicated members.
http://forum.xda-developers.com/viewtopic.php?t=46628
http://forum.xda-developers.com/viewtopic.php?t=33305
As for downloading files from the ftp, you should be logged in. The link you attached works perfectly for me. You could also use a ftp client software like CuteFtp.
ps. yep, CH is a nice country but quite expensive. If my memory serves me right, Zurich is the 3rd most expensive city in the world. I guess the only things cheaper here are the Swiss watches, Swiss knives, Swiss cheese, and Swiss chocolates (yummie) :lol:
Hey... it's working now! Thx to you, hehehe.... :lol:
So far so good after I manage to pull out the ExtROM using cuteFTP. Now in experimental mode to try out different stuffs.... getting more interesting.
If I do encounter any problem, I'll post again and hope you can help me once more
I miss the Swiss chocs.... yummy (especially white ones)... hopefully I can go there again soon. Btw, love the Swiss army too!
You're most welcome. Whenever you need help, continue posting on this thread or pm me.

No internet when I use rebel sim card

Hi friends,
I recently bought a HTC HD2 locked to T Mobile in UK. I used a Rebel sim to unlock it and I am now using it on O2.
However I am not able to start internet, neither can I receive internet settings from O2.
The message that gets displayed tell the phone is pre set to T Mobile internet settings and these cannot be changed
Is there anyway I can bypass these? Anyone else faced same thing before?
Thanks
Metal
settings - menu - all settings - connections - there should be a connection setup option in there.
if not, use this
phoneroms.co.uk/Programs/connectionsetup.cab
instal it, reboot the phone, it will auto run when you restart and configure your phone.
samsamuel
thanks for reply.
Yes I went to that menu option but the only thing I see is TMobile.
I am asked to select country (i select as UK), then I am asked to select operator and only option I have is T - Mobile.
Besides when I click on any browser, I get the T Mobile flash screen and then the browser starts.
I get an error as I am not a T Mobile customer. I have a link for settings there. When I click that it says -
This connection is pre configured. It cannot be modified.
You need to flash the WWE HTC ROM, as the T-Mobile ROM has the internet settings preset and you cannot change them.
hollinshead...
Thanks for the reply. I was guessing so from the little bit of research I have done.
Can you please give me some pointers in that directions...not really handholding but some links or step by step guide ?
I am new to WinMo actually...have been a symbian loyalist till now !
Sorry for sounding lame, but what is WWE?
WWE = World Wide Edition
Thanks.
I tried to d/l it from the HTC site. When I enter the serial no. I get
Sorry, this software download is not suitable for your device.
What are the other options I have? Other reputable links from where I can get it?
Can I d/l any ?
Thanks in advance
you probaly need to install hspl and then flash it
Thanks.
I got hold of a serial no after random searching. I entered that on HTC site and my download is in progress for WWE ROM.
Can I install it? Will that cause any adverse effects?
try using this network connection settings cab.
It appears you didn't try the one samsamuel posted.
http://forum.xda-developers.com/attachment.php?attachmentid=250891&d=1259353814
It won't let you flash it to your device, it will give you an error.
See here:
http://forum.xda-developers.com/showthread.php?t=611433
midnight, samsamuel
That does indeed work and I am now able to use internet on O2 even though I am locked to T Mobile. However I cant receive network settings. With O2 you send active to 2020 and you receive the internet settings. I get a message back that there is a problem and contact customer services. That is not an issue now as I can use the internet.
However I am curious to know if I will be able to upgrade my ROM in the future. I downloaded the WWE ROM but I got 294 Error for invalid vendor when I tried to install
In simplistic terms what is HSPL? is that irreversible? Are there any links for tutorials which make it simple for WinMo beginners.
Sorry but its my first day on HD2 and on WinMobile
metal675 said:
midnight, samsamuel
That does indeed work and I am now able to use internet on O2 even though I am locked to T Mobile. However I cant receive network settings. With O2 you send active to 2020 and you receive the internet settings. I get a message back that there is a problem and contact customer services. That is not an issue now as I can use the internet.
However I am curious to know if I will be able to upgrade my ROM in the future. I downloaded the WWE ROM but I got 294 Error for invalid vendor when I tried to install
In simplistic terms what is HSPL? is that irreversible? Are there any links for tutorials which make it simple for WinMo beginners.
Sorry but its my first day on HD2 and on WinMobile
Click to expand...
Click to collapse
Read the HSPL thread?
hollinshead said:
Read the HSPL thread?
Click to expand...
Click to collapse
Yes I did, but for someone who started using a new phone out of the box just few hours back, its a bit over the head.
I am trying to come to grips on what is HSPL, SPL, flashing, etc.
So I wanted to know if there is any basic tutorial, help pages etc which can be useful for starters. I am a tech guy so I can understand the tech terms but everyone needs a guidance first time around.

Categories

Resources