Related
pls help me with some of my questions
i just upgraded my xda2 mini with a qtek 1.11.00wwe rom then i restored my device after the upgrade.
now for the question: if i hard reset my device will i still have the o2 stuffs or qtek stuffs???
then, if i had qtek stuffs, will i be able to remove them and put the o2 apps back????
thanks for any reply
I dont think the qtek rom will install on the mini unless extract update file and perform a few modificatins, however once you have done the update the device will have the qtek apps, if you want to have th o2 customisation you will need to perform a hard reset with the o2 ROM and then do a soft reset just after you have done the screen alignment. Next in file explorer just go to the extended ROM and make a copy of these files on your SD / pc, and once the qtek update is installed you can then readd those customisation files from the extended rom
rgds
jim
thanks for the reply
damn, i have already done the upgrade. now i am left without a internet setting for my carrier.
who is your carrier? I am sure we could find a cab file for them.
rgds
jim
Hello there,
just wanted a fresh start with wm5 after recieving my 1gb minisd. because i didn't got the hardreset by pressing the buttons to work i used clean storage to hard reset, but afterwards it asks for calibration and timezone settings but doesn't install the cabs in the extrom. does someone know why and how i can fix this?
Ok, found out how hard reset by presing the buttons on the device works. But it's the same thing. Windows Mobile 5.0 setup starts (time zone and popup menu howto) but after this it says setup is completed and returns to the today screen.
But The cabs in the extended rom are stil there. I never touched them but copied the as backup to my pc. I#m able to manually install them when unlocking but they do not install by default. Why?
Can someone of the german XDA mini S users send me a copy of their original ext rom? I'm completly confused why my device ignores the complete cabs and autoexec from ext rom
hello there,
just inspected my extended rom a little further. There is no config.txt. I may have accidentially deleted this file.
Can someone who own a GERMAN O2 XDA mini S send me hiw original config.txt?
Thanks in Advance,
Maui
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
fmcgirt said:
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
Click to expand...
Click to collapse
It can, just try again anad again, i did it on my 4th attemps
Cheers!
Thanks for the response but I haven't had any success after several tries. I tried installing the Wizard unlock cab file and afterwards with Total Commander, I can reset the Read Only bit on all the files and copy the files to my SD card. However, I am unable to delete any files. They appear to be deleted but come back after a soft reset. I would like to especially get rid of all the operator settings files. The rest of the stuff like Skype, Anti Virus and Backgammon I can get rid of using Settings>Remove Programs.
Frank
Isn't "ROM" short for "read only memory"?
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Total commander does not work with the jamin in my case anyway.
Tried several time with no results.
shahzadkhan15nov said:
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Click to expand...
Click to collapse
hi,
unlocker for wizard is not mine...
buzz
...well, if anyone can give me a dump of Prophet's bootloader + clean registry export, i can take a look at it..
buzz
Buzz,
Thanks for the great offer.
I can give you the clean reg but how can i get you the first part, bootloader thingie?
Regards
I have used the Wizard Extended ROM unlock program to unlock the ROM on my Prophet. I now have a copy of the Extended ROM on my SD Card. I'm not concerned about erasing the Extended ROM files, I just don't wan them installed, so I did a Hard Reset and just when it says that it will start installing the additional prorams in 3 seconds, I did a soft reset.
OK, now I have a Prophet without extended ROM. I can now install the stuff that I want.
Most of the cab files I've figured out, Does anyone know what the following extended ROM cabs do? This is from the latest Imate Jamin ROM.
Default_CAAVPPC_IMEI_2.6.77_range.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_MP_Shortcut_MMS1_JAVA_VOICE_CV_051213.CAB
Default_PP_TSK.CAB
Default_PP_UAString.CAB
Default_PT_Signed_IconDll.sa.CAB
Default_PT_Signed_Patch_SD.sa.CAB
Thanks heaps,
Matterhorn
Default_CAAVPPC_IMEI_2.6.77_range.CAB is the anti-virus app which used to play havoc in slowing down the KJAM. Maybe this version is better but I uninstalled it using Remove Programs. About the rest I am not sure. At least you don't have Skype, backgammon and the Operator Settings files so I expect you will gain a fair amount.
Frank
you can use wince cab manager to see the content of the cab file.
Still nothing? Guess I will go the way of Matterhorn when I need to do a hard reset. Several others have not installed the Extended ROM at all and have reported significant speedup in the JAMin.
Frank
That would be me. I haven't installed one thing off the extended rom and my speed is really pretty good. You can see a video review at the link below to compare the m600 and the jamin (with no extended rom). Keep in mind I don't use mms, skype, antivirus anyway....so no big deal to leave off the ext rom. I also use adobe and don't need the clearview .pdf. Hope the video helps
http://www.howardforums.com/showthread.php?t=849592
Thanks, Mike. I don't use the stuff either except MMS once in a while but can just as easily use email for that. I presume Voice Dial is in the Extended Rom but rather have MS VC anyway and things like Connection Manager, Messaging, etc., that I want are not in the Extended ROM so I should be fine.
Now to find time to do a hard reset and re-install my apps.
Frank
Everyone has diffrent issues, I was able to delete the files from there (verified by refreshing the dir, and I recieved no read only error) but I was unable to write files to it, which I thought was very strange, I am using APA_ext_rom_unlock.exe and it does NOT give me the success msg it acts like it hasnt even ran. I updated my ROM to teh test one that was floating auround 2.8.7 whatever, and I realized too late that aWizard has no way to reflash teh extended ROM so I am without all my Cingular apps and I have all the 2.8.7 Extended rom stuff with the 1.8 Cingular OS ROM which I reverted back to. Any suggestions how I can replace my extended ROM ?
any luck so far?
Hi guys,
Are we getting any hope/luck to unlock Ext ROM for JAMin/Prophet?
I don't know how you guys are doing it. I have tried several times to delete items in my extended rom using total commander, at least 10 times and the result is the same. After the hard reset all that was deleted was re-installed after the reset.
I have contacted TC a while ago, and have not heard anything, maybe they are working on it.
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
mikewchandler said:
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
Click to expand...
Click to collapse
No, I think the end result would be pretty much the same. For me I would like an Extended ROM for the JAMin that includes exacty what I want installed - no Backgammon, AntiVirus, Smart Dialing, Skype and a single Operator Settings file for TMO USA. Then when I hard reset I don't have to mess with anything else, just let it go. I had my KJAM setup that way and I would like the JAMin to be the same. I would also be as close to an OEM install as I can get (without the junk) so I don't have to worry about proper default settings not being there because of some file I didn't install or installed in the wrong order. Having said all this and thinking about it more I am sure you would get to the same point doing your procedure and then installing the required .cab files in the proper order.
Now I have a question:
Wonder what would happen if I did a hard reset, then did the soft reset to stop the Ext ROM install, installed the required .cab files in order, soft reset and then restored from a Sprite BU file. Wonder would I be restoring any files that could cause problems due to an imcomplete ROM install? I guess I will have to try that first since I do hate to re-install a bunch of apps and especially have to re-enter all the reg codes.
Frank
OK, I understand how to do it with either the NoID updater or with HTC64 - that's not the problem...
What I want to know is this: if I change the Orange ROM to the latest i-Mate ROM, what happens to all the Orange network settings? Will I lose them or will the update only affect OS-type things?
Alternatively, which files in the Orange ROM will I need to replace in the i-Mate ROM (if I cook up a ROM of my own) in order to get the speed of the i-Mate ROM with all the Orange settings?
madcapmagician said:
OK, I understand how to do it with either the NoID updater or with HTC64 - that's not the problem...
What I want to know is this: if I change the Orange ROM to the latest i-Mate ROM, what happens to all the Orange network settings? Will I lose them or will the update only affect OS-type things?
Alternatively, which files in the Orange ROM will I need to replace in the i-Mate ROM (if I cook up a ROM of my own) in order to get the speed of the i-Mate ROM with all the Orange settings?
Click to expand...
Click to collapse
I guess it depends on which settings. If you are talking about mobile operator settings (like MMS, SMS, GPRS) then they are normally stored in a cab file in the extended ROM so all you have to do is copy the Orage extendedrom to your hard drive, flash the imate ROM, then install the appropriate cab file from the orange rom by copying it to the sd card and double clicking.
If you are talking about other settings (Wallpaper, splash screens, etc.) then this is ROM specific.
I may be wrong but I guess this is how it is.
It's just mobile operator settings I'm after.
I'm worried that once I install the i-Mate ROM I won't be able to use my phone. I know there's a long post that gives all the Orange settings but it just seems silly to have to enter them manually if there's a cab file that does it all for you, you know?
Thinking about it, could I install the i-Mate ROM then run the appropriate Orange cab file?
I believe that's what i said in my message :roll:
Hehe these settings are stored in your extendedROM. Do you know how to access ExtendedROM?
Give me a list of the files you have there.....I'm sure you can spot the operator settings. Or if you want, install Imate ROM then bypass it's extendedROM then install all orange CAB files that you transfered from ExtendedROM of orange to the PC.
Yes, I've already got the Extended ROM visible and writable.
This is the complete list of CAB files in the SPV M5000 Extended ROM:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
How about this, try this:
1. Install Imate ROM
2. Unlock/Unhide ExtendedROM
3. Delete Imate ExtendedROM and copy everything from the Orange ExtendedROM
4. Hard Reset
This will install the orange extended ROM
Now if you get some trouble with security/signing, there is a cab file in the XDA DEV ftp site that can handle this.... Just make the extended rom run this first before everything else.
OR
Just hard reset, bypass extended rom install, unlock/unhide extended ROM and then click on the files one at a time
How about this, try this:
1. Install Imate ROM
2. Unlock/Unhide ExtendedROM
3. Delete Imate ExtendedROM and copy everything from the Orange ExtendedROM
4. Hard Reset
This will install the orange extended ROM
Now if you get some trouble with security/signing, there is a cab file in the XDA DEV ftp site that can handle this.... Just make the extended rom run this first before everything else.
OR
Just hard reset, bypass extended rom install, unlock/unhide extended ROM and then click on the files one at a time
Hi Guys,
New here , so please forgive all stupidity....
I've got the new jasjar rom, about to flash my Orange SPV M5000, I'm currently running it without the orange customization, ie, i hard reset, reloaded the rom, then soft reset to avoid orange rubbish being, loaded, then manually reset the gprs etc,
If i flash the jasjar, will i get the same situation, but a quicker phone?
Any ideas?
Thanks,
James
Er....why did no-one mention that after installing the i-Mate ROM the phone then asks which operator you're with and then sets itself up accordingly?
:shock:
Im an M5000 owner too that was wondering about flashing to the imate rom...
Im after the microsoft direct push client thats on the new imate rom.
OK, plucked up the courage to upgrade to the jasjar rom, but I get a country ID error message,
Any ideas?
James.
Did you put the PPC in bootloader mode first?
Did you use MaUpgradeUt_noID.exe?
No, where do i get that from?
i just ran the jasjar rom exe....
Any ideas now?
J.
Extract all the files from the Jasjar .exe file to one folder with WinZip.
Replace "ROMUpgradeUt.exe" with "MaUpgradeUt_noID.exe" - you'll find it below.
Disconnect your phone from the USB cable.
Press and hold LIGHT + POWER + RESET until the screen goes white and it says "serial" at the top.
Plug in the USB cable. "Serial" will change to USB.
Double-click on "MaUpgradeUt_noID.exe" - the PC and phone will do the rest.
If you get a country error, just repeat the process.
download roms
where can I download the imate extended rom and the orange extended rom?
thanks for that, i've opened with Win Rar and got two folders OutputFile and RUU_Tools.
Sound right?
Then I drop the maupgrade app into RUU/Universal/WWE?
All good?
Thanks,
J.
Also, if i run the ma upgrade , nothing happens.....get the run dialog, then nothing.........
Ideas?
Ta,
J.
quietmoney said:
Also, if i run the ma upgrade , nothing happens.....get the run dialog, then nothing.........
Ideas?
Ta,
J.
Click to expand...
Click to collapse
Copy everything from the 2 folders into one folder then run the maupgrade from there.
Rememebr to be in bootloader mode before running MAUPGRADE and remove the SD card before upgrading
Please help me
I have upgraded the Rom on my SPV M5000 with the Imate ROM but lost all the Orange settings.
Can I get it back?
Re: Please help me
pjfdias said:
I have upgraded the Rom on my SPV M5000 with the Imate ROM but lost all the Orange settings.
Can I get it back?
Click to expand...
Click to collapse
Did you backup to your PC the Orange ExtendedROM? The Settings customizations were there.
If not try the XDA DEV FTP site. THey have extendedROM's there for download. Don't know if they have Orange ROM but just download it then put in SD card and run the appropriate CAB file.
Check the wiki of xda dev for instructions on how to connect to FTP site
I don't know what happend, but after I try to unlock and mount ext. rom, my device, keeps in the Orange startup screen for a while.
After that I must to do a hard reset, after the Install of programs (I supose from ext. rom) an error appears, saying The file: \extended_rom\autorun.exe does not exist. After that I need to do a soft reset to use my device. All seem to be ok, except some things about orange (I'm using it for voda, so dont care)
If I try to mount & unlock the extended rom after the hard reset My screen goes to the orange startup screen and hang it there...
I don't know what I must do know to try to access to the extended rom.
Even If I tray to restore a backup, my device hangs in the same point.
Please help me, If you can.
My device is an SPV M3100 (unlocked with pof method since 15 days).
Thank you in advance
I have the contents of the extended rom, of a previous day that I do a backup:
AutoRun.exe
AutoRun.exe.0C0A.mui
Config.txt
HERMES_SP_28_08_2006.CAB
MT_PC_Hermes_OrangeRO_REG_060612.CAB
MT_Shortcut-MMS-Hermes.CAB
T_mm1lib_DLL.CAB
But I can't put this files, because when I try to unlock the ext rom my SPV hangs, and I need to hard reset it
Each time that I try to unlock the ext rom my device needs to be hard reset.
I have a friend with another device like this.
can I extract the rom from this device and upload to my device?