I have a belkin router. It works well with several laptops.
I can connect to it with my JASJAR and get an IP address.
If I sync pop3 email it uses WIFI and works as expected.
If I sync journal bar it uses WIFI and works as expected.
However if I try to use internet explorer it alway tries to start a GPRS session and refuses to work through WIFI. :evil: Why??
Ive sent hours trying every setting I can find.
Anyone have any suggestions? :?:
Jon
At least your Wifi network doesn't crash as soon as u connect the JJ. Mine doesn't even get that far...
Anyone who can help???
Hmmm I wonder if this is something in the Telstra settings Cab.
Re those having problems all on Telstra?
Might try a hard re set and then manually build the settings.
Jon
Try de activating the phone. this allows you to use IE via your wireless router.
Tried that, thanks.
I just get the "Cannot Connect" message and if I dismiss it. Nothing!
However I can sync the weather without getting the "Cannot Connect" box. SO the WiFi is working, its just that Explorer can see it.
Im running the O2 UK firmware and it works fine (auto gives prefernce to the WiFi if I am in range, try loading on the genuine Imate firmware.
Jon
I know how you feel. I can't get wifi to work. Heck, I can't even use IE when synced to the computer via USB :evil:
Have you tried messing with the settings in start/settings/connections/connections?
I finally got it working.
You have to chose the "Telstra Internet" setting in Network Managment.
Its in Settings, Connections, Advanced, Select Networks, select "Telstra Internet".
I then did, Settings, Connections, Manage existing connections, Modem, and set it to "Auto"
It uses the WiFi first and then only uses GPRS if there is no WiFi.
Hope this helps someone else !
Jon
Can anyone help me with just getting my JJ connected to the wifi network without crashing the router?
Have you tried turning off any encryption etc and re booting the router.
Then try to connect at the most basic level?
Now I'm totally confused
I don't know what is going on!
I have finally managed to use IE via Activesync, using "Telstra Internet" as my My network connects to...
I tried again to hook up to the wifi network. The router is connected to my desktop via a physical cable, and my tablet pC is connected wirelessly (my JJ syncs with the tablet). I turned to tablet off, and then connected the JJ to the desktop wirelessly. On the desktop, I am no longer able to connect to the internet, but for some reason, the JJ is able to connect to the internet :shock:
But, even if I disconnect the JJ from the network, my desktop is unable to connect back to the internet until I reboot the router. What does this all mean????
I have the same issue with my MDA Pro! i done even have the sutp option in the modem settings. I can connect to my belkin router with encryption but no response when in IE!
Anyone else got any other suggestions?
I'm beginning to think that nobody has a solution to such connection problems. Is there any hope on the horizon? Any chance of something being sorted out by MS?
BTW, how well does BT syncing/internet connection work?
Ok frustration rising.
I can connect to my Belkin wireless router with no problems but I can only log onto the router and not browse the internet!
I have checked that the proxy is not configured.
Anyone got any ideas?
Nope
Hi.
bit of an odd one. I've got a Schap 3.03c modified Tytn, currently on Tmobile
I've noticed that if I use Wifi on the tytn, then turn the wifi off and then try and use GPRS to connect to the net, I just get "locating" in PIE and basically no net connection via activesync/opera etc.
The only way I can get GPRS back, is to go into connections and untick the use proxy settings under tmobile (although it doesn't store the changed tick!), then select ok. Then I can connect to the net fine using GPRS
Anybody else seen this ? It seems to be resetting something somewhere, when using this tickbox as I tried it without using tmobile proxy settings, but still the same issue.
Found the problem!
This problem was being caused by the Blackberry Service on my device. In further investigation I discovered that whenever the Media Net connection goes stagnant the Blackberry connection would reestablish & try to check for new emails. The new BIS connection would change my IP to communicate with our Enterprise Server & of course subsequently, Media Net was killed. When I would try & re-establish my logmein connection it would report the new IP which was hung on Blackberry instead of being reset by Media Net & would report as Mismatched for security reasons.
The solution:
Whenever I need to do some work on my desktop remotely I now suspend the Blackberry Service & have now had no problems with logmein, even through reconnects.
Thanks for all the IM's & emails, there were some interesting ideas
_________________________________________________________________
For years I used logmein with verizon's network without problem. But now I'm AT&T & every time my connection resets I get an error stating "Mismatched IP Address" causing me to have to shut down PIE & start over again.
I have read about a broken proxy fix meant for other client laptops & pc's. I have imported my own"broken proxy" reg.value into logmein security registry settings on my Kaiser. However, every time I lose connection, I still have to start over. Anyone else have this error before?
I'vd tried everything I can think of. Any help?
Thx!
i believe it has to do with using wifi instead of edge/3g. I had the same problem when i logged on with edge and then tried to access my computer with wifi after already logging in to the system. I dont know of this will help but i just relogged in and accessed the pc using the same connection type.
negative, it happens using 3G, edge, gprs, etc.
I thought maybe I could enter an IP in connection settings but then I can't connect period.
Hi, I know this is an old thread, but I'm getting the same error message on my HTC Touch HD (Win Mo 6.1) - any ideas as to how the specified solution could be applied to my device?
Thank you.
hi iam fighting with my hd to set up connection and i finde big problem with this
my phone is on orange brand but using o2 dont know that change sth or not...
went on o2 page to find setup for the internet setting and i done it its connecting with serv i can update weather but that everythig what i can you when iam going for ie its showes "cannot connect with current connection settings. to change your connection settings, tap ble ble ble but the phone is connected so whats the prolem >???
opera saying network problem "make sure your internet connection is active and check whether other applications that rely on the same connection are working...
i set up wap and mobile connection according to this page http://xda.o2.co.uk/faq.jsp
any idea what can be wrong????
is the new connection picked in
settings->connections->connections-Advanced->selectet network ?
sorted
the problem was exactly there...
Rudegar said:
is the new connection picked in
settings->connections->connections-Advanced->selectet network ?
Click to expand...
Click to collapse
i install HTC UK Settings.cap but didnt work but program del some stuff form connection list i set up like o2 saying but later i change there my work network first and mobile web secend ands its works
Hi, I've been searching for a while for a way to get my phone's WiFi to connect through my school's proxy server.
I've tried setting the connection in Network Cards to Work and setting up a connection with the settings for it, but Internet Explorer still can't load a page.
I read something about a default connection called Work in the Connections but I can't find it, however when I try to make one called Work it says one exists already
Has anyone got this working? It would be very useful for some of my classes and I'd like to have the net without booting my laptop up
Any suggestions appreciated, especially if you can tell me where to find the Work connection settings.
Aaron.