Related
Here I am, installing 4.1 for a third time....
Why is it so hard to make a stable connection utility? All I get now, no matter what I do re: firewall/connecting while off/rebooting/rerunning AS is "USB Device Not Recognized".
God I hates it.
I take it there is NO alternative to syncing my Outlook 2003 etc?
Yep, it's about as tempremental as a 3 year child.
I find best solution after that error is.
1 disconnect pc and universal
2 reboot both and let them finish starting
3 press power switch on universal to put it to stand by.
4 connect them
5 when universal awakes go to activesync and select sync.
Have you checked your firewall thoroughly?
This drove me crazy until I realized the firewall was blocking connection to the device.
Remember that with stoopid new activesync, which also conveniently removes wifi syncing, you are making a tcp connection to the device that requires a clear path through your firewall.
V
vijay555 said:
Have you checked your firewall thoroughly?
This drove me crazy until I realized the firewall was blocking connection to the device.
Remember that with stoopid new activesync, which also conveniently removes wifi syncing, you are making a tcp connection to the device that requires a clear path through your firewall.
V
Click to expand...
Click to collapse
Was giving error even with firewall temporarily (!) turned off.
All sorted now, uninstall etc...
I gave up on USB and use Bluetooth only (works perfectly)
I gave up on trying to get USB to work with Activesync ... after several hours of frustration. I use the "Connect via Bluetooth" option and it has worked perfectly everytime, which is a great improvement of my XDAII. I hope this helps.
I used the newest german version on buzzdev.net
Connected immediately.
So i think it's the version,
Hi. This has worked for me, and solved a massive problem. Hope it helps someone else too.
Step 1:
Ensure you are trying to fix the same problem as I was by looking at the symptoms, which were:
- HTC Wizard synchronizes OK when you plug it in the first time
- It stays in sync if you leave it plugged in
- If you unplug it and then plug it back in at any time later, XDA goes s-l-o-o-o-w and then freezes and will NOT re-sync
- If you unplug it and soft reset before reconnecting then it's fine
Essentially, the Wizard was requiring a soft reset between every connection to the USB cable, or it would crash and require a reset anyway!
These issues have been discussed in about 10 threads on this board, and on pretty much every other resource for Wizards and Pocket PC devices on the net. I was, however, totally unable to find something like this which directly addressed the problem.
Step 2:
Download a program called Dr. TCP from here: http://www.dslreports.com/drtcp
Run it to open a dialog box with loads of fields with strange techy names... no, i didn't understand it either. However, I've been searching the net for days and I found an article here: http://www.pcworld.idg.com.au/index.php/id;504222574;fp;2;fpid;1277378924 which told me how to work the numbers out...
In the bottom drop-down box, select "Windows Mobile-based Device" and enter 1492 in the box next to that. That's your maximum "MTU".
Here are the settings which work for me (from the top). If i don't mention a setting, I didn't change it!
Tcp Recieve Window: 261360
Dial Up (RAS) MTU: 1492
Path MTU Discovery: Yes
Save and Exit Dr. Tcp.
Step 3:
You need to open "Network Connections"... in XP, that's Start > Connect To > Show All Connections. I'm sure you can find it yourself. Anyway there should be an icon called "Local Area Connection (x)" with "Wireless Mobile-based Device" written in grey underneath.
Right click on that and select DISABLE. This will close your USB connection to your Wizard so those MTU settings can be applied.
Now unplug your Wizard from its cable. Here, I tried right clicking on the connection and selecting "Enable", but it just errored. So you need to unplug it.
Step 4:
Reconnect and see what happens. I am now happily disconnecting and reconnecting as many times as i like and it just keeps on synchronising itself. MAMMA MIA!
If this solves your nasty "i need to reset every time I disconnect" problems then please post here to say so. If it doesn't work then post here also, I guess. If this is a solution for you then credit for this is not mine - it's just the sum total of a lot of searching across this and other forums, websites and message boards. THANKS!
not working
These steps did not work for me.
I still have to reset the device otherwise I get this message after about 5 minutes.
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
It appears to be only a problem syncing as I can still explore the device.
well...
...that's depressing. I genuinely thought that would work for other people too.
Did you read that PCWorld article I linked to? it explains how I got those numbers... they could be different for you, perhaps?
I'll keep thinking...
I did not look at the article. I'm having other issues trying to get my 2 computers synced with my mobile device http://forum.xda-developers.com/viewtopic.php?p=234189. Once I get those resolved I can try some different things.
On my home computer I am only synchronizing favorites and files and it doesn't appear to be a problem.[/url]
Oh right ok. I read your other post too, but I only have 1 PC for home and work so i can't help with that.
Has anyone else tried this?
I am no longer having the problem since I fixed my other sync issue (multiple computers issue). I had reinstalled activesync and did a hard reset on my device so maybe something else got cleared up. I am also having much better luck with the way my device is running. Before I was getting frequent slowdowns and lockups. I am a much happier customer and will be sticking with my cingular 8125. I just love all the features, but the activesync issues and slowness was starting to get to me. I'm so glad it is all behind me now and I can start to really enjoy the thing. Although I have yet to connect my bluetooth headset, that may have caused me issues too. Sorry I couldn't be more help testing this out.
I and a work college have had this problem on both our systems and found that it was being caused by Avantgo.
It would work fine and sync every time for days until we installed Avantgo.
After these we both had the symptoms you describe in the first post until we did a hard reset and re installed everything except Avantgo, it was then fine again. As a test I then reinstalled it and it started not syncing again, my college who has not reinstalled it has had no further problems.
I have now been running for 3 weeks with no problems and no Avantgo.
If you have it installed it may be worth trying it without for a wile and see if it helps.
Didn't work for me. Still no connection when plugging in for the 2nd time. MTU value changes back to blank when opening the Dr.TCP again, the other values are ok though. But thanks anyway for the hints!
Greetings,
Andreas
Didn't work for me neither...
just to check (i know this sounds daft) but you did DEFINITELY press the SAVE button in Dr TCP before you pressed the EXIT button? can't imagine why it wouldn't store the data.
aaaaaaaaanyway i guess it's not the ubersolution i thought it was
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Any updated? I'm having this same problem, except my device won't connect at all! Even after a reset. It connected once and that was it.
Hi Silentz,
sure, I saved the settings. I'll try the ActiveSync clean install-method and report the results. 'Hope that MS will put out an update or better version soon! Rumours out there?
Greetings,
Andreas
tried and failed...
tried the above TCP solution- Not working for me either...
Found best solution. Go try the latest imate rom. You can then plug out/in the cable as many times as you want & it'll just work fine.
Bebbo said:
Now I thought I had this working 100% using this hack (It was on a clean install of WM5 however so this may have been why it worked). Anyhow, it stopped working again after I installed PocketWeather ... now locks up whenever I connect....
I wonder if it is 3rd part s/w causing some of the problems with AS? Is it down to the scheduled update in PocketWeather or simply hooks into the ConnectionManager / ActiveSync from apps looking to see if a network connection exists....
I think some more investigation is required ... or perhaps I will flood MS with 1000's of emails telling them how flakey their software is *(Though I think they already know that)*
Click to expand...
Click to collapse
It seems to be as soon as you access the internet through the passthru connection on Activesync. So installing AvantGo/PocketWeather might explain this to a certain degree as they may be accessing the internet.
Incidentally, how could Microsoft have stuffed up so badly with Activesync? It's a tiny program but works so badly - Couldn't a third party come up with a different version of Activesync or something? I'd pay for it if it worked better than this crock!
Just for info, the latest iMate ROM (With Push Email) does indeed seem to fix this issue. Obviously it was with the WM5 side rather than anything that could be fixed on the PC side.
My Active-sink probelms disappeared since upgrade to the latest iMate ROM. Has been working like a charm with all apps and utilities installed, Tweaks2k2, Spb Pocket Plus, Pocket Informant, Worldmate Pro, etc...
told you it works
cheers
I am running the 2.08 (Qtek test) rom and have this issue since last friday. before that never had it!!
What I changed on thursday was: enable exchange server sync and use it. because push-email si no solution for me I just disabled it and dropped the association.
Then (on friday) the trouble started.
I tried DrTCP...and ended up with a broken netlogon (secure client) service on the pc. The IS solution for that was a new image . . thank you very much.
I am back on track with the pc now, but AS still slows down my device.
Are any of you having this trouble using or have used:
-Push email
-Blackberry
What is the amount of free program memory on your device? Mine is around 6MB (probably caused by Blackberry install which I cant remove). . . .
Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris
I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.
Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James
I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?
I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.
I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare
Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?
Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks
I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.
Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC
Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you
Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris
I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris
Hi. I've had a really good search for info before posting and tried lots of things but I'm stumped!
I've got a Softbank X01HT (HTC Hermes 200). It used to work fine with AS4.2 and 4.5 but stopped working one day and hasn't worked since!
When I connect the phone via USB everything looks normal. I get bing-bong and bong-bing etc, I can see the phone is attached in device manager, the phone charges etc. etc. but AS won't connect to the phone. In AS connection setting it says USB is available etc. I have deselected advanced USB connection and tried "work"/"internet" etc.
I haven't done anything to the phone. No upgrading of ROMS or OS or anything. I even gave my laptop a first birthday!
I have a Dell Precision M60 running Win XP SP2 and a fresh installation.
I have deselected "do not allow exceptions" in Windows Firewall and AS has put exceptions for itself in there.
I am not running through a hub.
I'm hoping someone can help - maybe I missed something in all my searching for a solution.
Had something similar happen to me once. Resolved it by deleting the partnership on the pc from within active sync on pc (make sure phone isn't connected or active sync won't let you delete the partnership). Issue was with the partnership profile on the pc getting corrupted nothing to do with phone at all. Once partnership is deleted connect phone (make sure you have reset your phone settings that you have changed back to default) and set up a new partnership. Good luck and let us know if it works.
Cheers
Barney
Barney
Thanks for replying.
As mentioned, my laptop got a "first birthday" i.e. the HDD was wiped and the OS re-installed. There are therefore no pertnerships or remnants buried deep in the registry etc. to delete. In AS (with or without the phone connected) everything except for "connections settings" is greyed out.
Cheers
Bryce
Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney
tatuanui, have a look at
http://pocketpcapps.net/activetweak.aspx
maybe this freeware tool can help you
cheers jost
Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me
Active sync
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.
Thehoodedclaw_uk said:
I had a similar problem. Check out Settings/Connections USB to PC and uncheck "Enable advanced network functionality"
This worked for me.
May not be related but worth a try.
Click to expand...
Click to collapse
Thanks but, as metioned, already tried that one.
g35driver said:
Whenever mine acts up I simply disconnect my phone, restarting my pc, restart my phone and is well. I dont have the problem often but it solves it for me
Click to expand...
Click to collapse
Thanks. I wish it was something simple (yet annoying) like that...
Barneyabz said:
Do you by any chance have zone alarm running? If you do switch it off and see if it works. If you don't then switch off Windows Firewall and see if works. Post the results.
Cheers
Barney
Click to expand...
Click to collapse
Barney
Cheers. When at work, Windows firewall is off. When at home it is on but exceptions are allowed and AS has put itself in the exceptions. Switching off the firewall completely is not an option as the admin has switched that function off (greyed out). This is no different to when it was all working so I'm not so sure it's that.
I don't have zone alarm. In fact I have re-installed very little since having reinstalled Windoze.
Keep the suggestions coming though!
tatuanui said:
Barney
Keep the suggestions coming though!
Click to expand...
Click to collapse
Had a similar problem.
Open task manager. Is RAPImgr.exe taking up all the processor time on a CPU (so will take 50% on a dual core machine, 100% on single core).
I had this issue with AS 4.5 when upgrading from the old machine (Wizard) to the new Hermes and basically had to reboot between connection attempts to get RAPIMgr to die. When I killed it manually, the computer rebooted anyway.
The problem with this seemed to be disconnecting it mid-sync and then connecting a new phone which then broke it. The way I solved it was to stop connecting the Wizard.....
Perhaps try removing the relationships on AS on the phone. I guess it might work....
Hi last suggestion I have - I know you mentioned your pc was wiped so there are no partnerships, however the first time you tried to connect your phone since then something might have gone wrong and a partnership might have started to be created but not yet completed. With your phone disconnected can you open active sync, click on "file" then on "delete mobile device" (if it allows you to - it might be greyed out) - See if that works and get back to us.
Cheers
Barney
I've been trying to get my friends phone to connect to my notebook and have been unsucessful. I tried changing cables, reloading activesync. I can take the the same cable trying to connect the mogul unplug it and put it into my Kaiser and it works just fine. Unlplug the Kaiser and put it into the Mogul and absolutely nothing except for the charging light come on. Tried doing soft/hard rest on teh phone. I'm really out of options on this. Any ideas of what to try?
Under the connections panel check the USB to PC connection. you may have to un-check "Enable advanced network functionality"
Also what OS are you running?
I read that from another thread before and that didn't work for me either.
I'm running XP.
She had a problem before not being able to connect. I added a bunch of software to her phone before and then it started being able to sync. I did so much to the phone before so not sure how I fixed it. But for some reason I thought maybe it could something to do with NetCF since that the only update that would effect the whole phone.
Stock ROM? I know I had some issues with one of the cooked roms I made in the kitchen, I can't remember which one though...
Gudy
Orignal Rom. I was actually going to update her to a cooked rom.
I would, bet it fixes the problem too.
Gudy
unblock your firewall, i had the same problem last night and all i had to do is unblock firewall, or add it to trusted programs and it worked fine for me.