Related
Since this is so new, it seems there are not many cases out there yet. The really neat ones are for the 8525, suppliers like: Krusell,seidio,beyza are not up to speed yet, or Am I wrong? Any one have any ideas on when there maybe releases?
I honestly love the one that came with the Kaiser. However, I heard that cases with magnetic flaps cause the Kaiser to automatically turn on since there is a magnetic connection to the slider keyboard. I'm not too familiar with this issue, but did read this somewhere.
I don't love the sideways case with velcro and non-springloaded belt hook, currently using a leather magnet flap case for a generic flip. Mine does not turn the phone On, depends on where the magnets are located as ones that are close to the keyboard's "open sensor" can turn the phone On. I'm rooting for Pocket Solutions to make one.
I'm watching the "Kaiser Accessories" area for the mose current info... as should you.
I put my Kaiser on my jeans' pocket with no cases (except screen protector).
gogol said:
I put my Kaiser on my jeans' pocket with no cases (except screen protector).
Click to expand...
Click to collapse
You`re braver than me
Well, it should be fine inside the pocket, and the jeans is thick enough to protect the Kaiser and soft enough to not scratch the surface.
The only downside is dirt inside the pocket, but like I said, I always wipe it out clean (usually in the screen area). It will be the same in the case, screen get dirt.
My wife quite jealous the way I treat my Kaiser Because I will wipe clean the table, take a clean paper or tissue and put it like a carpet before I put my Kaiser ...
coercri said:
You`re braver than me
Click to expand...
Click to collapse
gogol said:
Well, it should be fine inside the pocket, and the jeans is thick enough to protect the Kaiser and soft enough to not scratch the surface.
The only downside is dirt inside the pocket, but like I said, I always wipe it out clean (usually in the screen area). It will be the same in the case, screen get dirt.
My wife quite jealous the way I treat my Kaiser Because I will wipe clean the table, take a clean paper or tissue and put it like a carpet before I put my Kaiser ...
Click to expand...
Click to collapse
Yeah, i treat my Kaiser better than my wife
Krussel will release the ORBIT case for the TyTN II during October.
PDAir have just released a couple of Kaiser cases, and there are a few similar cases on eBay. Piel Frama have told me they'll have one in the next month or so.
4ustuff is a Hong-Kong based wholesaler that has a lot of Kaiser stuff, some of which may make its way into the retail channel.
on the Pocket Solutions website they're offering a fullbody "SkinGuardz" for the Tytn II...only problem is it's not in stock...i prefer a solution like this vs. a case (although one drop on the ground might force me to change my mind).
I used a slightly altered PDAir case for the Hermes (i cut all the clear plastic off over the keyboard and used Velcro to attach the phone to the case - worked really well. But with the Kaiser I`m leaning more toward the pouch type case, or perhaps a thin silicone case, but Ive not seen one of those yet.
Just Wireless Case
I bought a case at Staples yesterday from a company called Just Wireless. It is for a Blackberry/ Treo 750, but the TyTN II fit's in it perfectly. It is a holster type and it has a slim belt clip. You can probably find them at Walmart, Target, and others like that as the case retails for about $18.00. (picture taken with my TyTN II attached)
It may not be the best case, but it does the job for someone like me who is on traveling all the time and needs quick access.
James
jamesjsenecal said:
I bought a case at Staples yesterday from a company called Just Wireless. It is for a Blackberry/ Treo 750, but the TyTN II fit's in it perfectly. It is a holster type and it has a slim belt clip. You can probably find them at Walmart, Target, and others like that as the case retails for about $18.00. (picture taken with my TyTN II attached)
It may not be the best case, but it does the job for someone like me who is on traveling all the time and needs quick access.
James
Click to expand...
Click to collapse
Another option is this camera case -- I picked one up at my local Fry's a couple weeks back for $6.99. I see they've lowered the online price to below $5 -- that's going to be hard to beat.
i am a huge fan of gizmoskin.com if you read reviews on the cases you will see they use a very high grade leather. looks amazing and holds up like a champ. i have not seen their equal except for very very expensive designer cases. have been using their cases for he last 3 years
i asked them about a kaiser case and they said thy would look into it. if you want a nice case shoot them an email and say your interested.
I would love this one! (Cause I'm paranoid and had a Metal one for my Wizard...) but I can't seem to find anyone that carries them...
http://4ustuff.com/info.php?itno=2039
//Nik
How is the case that comes with the Kaiser
I hope the one that comes with the Tilt is the same
As far as free cases go the one that comes with the Kaiser is excellent, very soft. I am waiting on a holster because I don't like taking the phone out the case while driving.
I use the holster I had for my old 8525. It fits my new TyTN ll perfectly.
w4rmk said:
As far as free cases go the one that comes with the Kaiser is excellent, very soft. I am waiting on a holster because I don't like taking the phone out the case while driving.
Click to expand...
Click to collapse
Cool, I will order one from mobileplanet
Krusell
m0bov said:
Krussel will release the ORBIT case for the TyTN II during October.
Click to expand...
Click to collapse
In my opinion Krusell make quality cases which are practical. I bought one for my Vaio I. recently the clip broke, due to rushing through a doorway and having the phone yanked off the clip.
Krusell said send it back with proof of purchase and they will replace beacuse it comes with A LIFETIME gurantee.
Max
Hi, I'm looking for a silicon protection for my kaiser. Yesterday I drop my kaiser for my first time... It has 3 horrible body scratches now... the smooth surface is anything but scrached protected...
I'm now looking for some kind of protection. My first idea was to get a silicon protector, like those used for ipods... But I have not been able to find any....
Does any of you own one of those?
Any recomendation?
http://shop.brando.com.hk/prod_detail.php?prod_id=02247&dept_id=039&cat_id=0763
Thanks for the info!!!
Are u using one of those? Are u still able to use the HTC holder (The one included in the original HTC TyTN 2 box)?
Have u buy any other product from that website?
thanks !!!!!
I am not using it for the TyTNII, but had one for the P3600. Have ordered many products from that site.....no problems whatsoever. Still think Brando screen protectors are amongst the best you can find.
Has anyone seen a similar silicone case but with a plastic screen protector like that for the wizard?
- TKN
How the Brando works if we slide and tile the screen? Anyone can post a pic for this?
they sell it on ebay for $10 shipped
Hi,i've bought one for my trinity and it was very effective.So i command one ( Brando ) for my Kaiser.I've received it today and it's really a bad product,the protection fall all the time.So i continue to use my trinity silicon case.So don't buy this !
I've got one off eBay, maybe fake who knows, but it suffers exactly as Marcdu81 says. Its rubbish, falls off all of the time, on the Artimes, I used a silicon protector in cunjunction with a slip case, and was hoping to repeat that with the kaiser. Looks like the Seido super thin case is the only way, at ~£30 to the UK. I only paid £80 + contract for the kaiser so £30 is a lot for a case. I'll carry on hunting for a good and cheap case.
DO NOT BUY THAT!!!
It's a piece of junk just like everyone said. The best protection currently for this device is the Seidio rubberized case. I know it's pricey, but it's well worth it.
Trust me, I tried the cheap way and got that piece of crap from ebay. Do like I did and bite the bullet. You can get the Seidio rubberized case for a few bucks cheaper on ebay.
http://cgi.ebay.com/724-Seidio-Rubb...ryZ20337QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Actually, once you get the Seidio case, the crappy silicone case fits much better when you use both at the same time.
do they sell the Seidio rubberized case without the hole for the second camera in the front? my tilt doesnt have the second camera.
gotdibz said:
do they sell the Seidio rubberized case without the hole for the second camera in the front? my tilt doesnt have the second camera.
Click to expand...
Click to collapse
Unfortunately, they don't... Yet. They say they MIGHT in the future but I wouldn't hold my breath. Believe me, the beauty of this case makes up for the useless hole.
Is this the one you guys are saying is crap? >>>http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902
This is the one i have and it fits like a globe.
you can find it on ebay onder this name: Seidio Rubberized Case HTC Tilt 8925/Kaiser/TyTN 2
or go to tiltsite.com and seach for seidio brand
mobits said:
Is this the one you guys are saying is crap? >>>http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902
Click to expand...
Click to collapse
Yes that's the one they're saying is rubbish. I ordered one too and the thing just will not stay on. I hate it when the rubber falls off
elypsar said:
Yes that's the one they're saying is rubbish. I ordered one too and the thing just will not stay on. I hate it when the rubber falls off
Click to expand...
Click to collapse
THAT'S WHAT SHE SAID! HAHAHAHAHAHAHAHAHAHAHAHA
But Anyway I have to second or third the notion about the Seido Rubberized Case. It stays on the Phone SO well and you can slide a tilt with ease. It's so awesome.
Thanks guys, I'm going to bite the bullet and get the Seidio rubberized case then. Hopefully there won't be problems with this rubber falling off!
mobits said:
Thanks guys, I'm going to bite the bullet and get the Seidio rubberized case then. Hopefully there won't be problems with this rubber falling off!
Click to expand...
Click to collapse
and... i'll pay US$10 for such a case on ebay or some other B2C website...not very cheap...
Hi all,
I have a case question for you. And it deals with a specific type of case, so that's why I didn't use one of the other threads. I'm looking for a pouch for my Tilt. Like the Krussell Vertica. What I'm after is a vertical leather pouch, that is made just for the tilt only. I can find all kinds of universal ones out there, but they all too big since they fit the HTC apache (6700) I'm after something that fits the tilt snugly. Here's a couple I've found so far:
http://www.tiltdepot.com/krusell-vertica-multidapt-s-wide/4A25A1414A2.htm
http://cgi.ebay.com/MONACO-BLACK-LE...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've looked at the sensa pouch cases as well. Can anyone recommend a good one that isn't made for all kinds of phones? any ideas? Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Someone has pointed this one out in another thread, it looks nice but they said they could find it for like $15... which I havent been able to do...
http://store.mobilitytoday.com/content/accessories/4-120--3196.htm
tfdeere said:
Hi all,
I have a case question for you. And it deals with a specific type of case, so that's why I didn't use one of the other threads. I'm looking for a pouch for my Tilt. Like the Krussell Vertica. What I'm after is a vertical leather pouch, that is made just for the tilt only. I can find all kinds of universal ones out there, but they all too big since they fit the HTC apache (6700) I'm after something that fits the tilt snugly. Here's a couple I've found so far:
http://www.tiltdepot.com/krusell-vertica-multidapt-s-wide/4A25A1414A2.htm
http://cgi.ebay.com/MONACO-BLACK-LE...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've looked at the sensa pouch cases as well. Can anyone recommend a good one that isn't made for all kinds of phones? any ideas? Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
A friend of mine has his Tilt in a case like you are describing... I think he said it was actually a Treo 750 case, but his Tilt fit perfectly.
-Jay
I have posted this in this forum before. The Treo 680/750 is within a mm of the dimensions of the Tilt. Any Treo pouch fits like a glove on the Tilt. I am currently using a fitted Treo pouch as my main phone holder.
You can get that Cellet case for less than $11.00 on Amazon.com. I bought one today.
http://www.amazon.com/exec/obidos/t..._shr?_encoding=UTF8&m=A3UW6FFMODPQYZ&v=glance
Thanks Gaby... I was looking for one that said Tilt... didnt know the Treo one would work... I likey the price... I wonder what the clearances would need to be if you have the rubberized case on the Tilt
Just picked up this case at Bestbuy... fits nice and should have enough room for when I put on the hard skin...
http://www.bestbuy.com/site/olspage...+case&lp=2&type=product&cp=1&id=1166840037625
I received my Cellet case from Amazon. My Tytn ll has a rubberized hard case and it fits perfectly inside it.
I need to say this case is beautiful... For $6.00 plus shipping is a great buy.
Tilt/Kaiser Cases
jpofsc said:
Just picked up this case at Bestbuy... fits nice and should have enough room for when I put on the hard skin...
http://www.bestbuy.com/site/olspage...+case&lp=2&type=product&cp=1&id=1166840037625
Click to expand...
Click to collapse
I have that HTC one from best buy listed above, it fits prefectly, has 2 magnets holding the flap closed and the belt clip is metal. It also has a soft velvet interior to resist scratches.
Would be nice if the clip had a double lock on it, though.
~~~
Another I really like is this one; from at&t.
It is in the "Universal Cell Phone" category at the store, at first it was too small, but after a few hours use, it stretched to fit my tilt like a glove. This one makes a real nice case if you need something a little more rugged, its clip made of a heavy (pvc like) plastic that double locks around your belt, making it impossible to accidently come off. The "Ballistic" Canvas has a quality feel and the velcro feel like it will last, not the cheapstuff.
Just be carefull until it stretches, it had the tendency of catching the stylus, doesn't anymore though.
~~~
Both are a bit pricey, but considering the cost of the phone, I wouldn't trust those $9.95 specials, unless I could get my hands on it first. My friend found a $10 version of the HTC one, but the leather on it feels like it would wear down and rip pretty quickly.
NiteStalker said:
Another I really like is this one; from at&t.
It is in the "Universal Cell Phone" category at the store, at first it was too small, but after a few hours use, it stretched to fit my tilt like a glove. This one makes a real nice case if you need something a little more rugged, its clip made of a heavy (pvc like) plastic that double locks around your belt, making it impossible to accidently come off. The "Ballistic" Canvas has a quality feel and the velcro feel like it will last, not the cheapstuff.
Click to expand...
Click to collapse
This case is actually made by Nite Ize, and it is available on Amazon. The LARGE size fits the Tilt best compared to SMALL or PDA/Smartphone. The magnet version is also better than the velcro one.
Hey guys/gals, just thought I'd share this with you. I bought this case for my Tilt and it's one of the best I've had. The phone fits perfect in this case. Snug but easy to get out. I paid $12 on ebay for it. Make sure you buy the one with the attached belt clip (like in my pic). There is another one on there that allows you to change the belt clip. I had that one too but (same perfect fit) but unless you have a thin belt, the clip will not catch the belt. I'll include one of my previous cases. This one is just a better looking case and feels real sturdy. Hope you like it.
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Kraize92 said:
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Click to expand...
Click to collapse
Unfortunatly no I haven't. There's a thread on here that has the Seido clip with mods on it. Looks sweet.
I recently had bought a case for my Wing (before getting the tilt) and it fits the tilt perfectly and allows access to the usb port - unfortunately it seems the ebay seller is no longer registered so I can't even get the details from the auction.
This is HTC branded and the listing was titled NEW HTC TOUCH SHADOW MOGUL VX6800 MDA OEM LEATHER CASE
Edit - Found the case, different seller and more expensive, but you can see it - http://cgi.ebay.com/OEM-Leather-Case-Pouch-for-HTC-Wing-P4350-Herald-XV6800_W0QQitemZ150268701210QQihZ005QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
dampeal said:
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
Click to expand...
Click to collapse
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
airjer said:
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
Click to expand...
Click to collapse
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
dampeal said:
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
Click to expand...
Click to collapse
That's the one I've just bought... and I like it a lot. Fits really well although the slideout keyboard doesn't slide as smoothly now it's in the case.
dampeal said:
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
Click to expand...
Click to collapse
Thanks for the GREAT review.
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
jim131 said:
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
Click to expand...
Click to collapse
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
thetruth1985 said:
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
Click to expand...
Click to collapse
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
texas said:
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
Click to expand...
Click to collapse
not necessarily, you could face it either way and its worth it. believe me, its worth it. even though its a little pricey.
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
grymicast184rc said:
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
Click to expand...
Click to collapse
This is the same case I have. Been very happy with it! For the person who asked... it does leave the USB port exposed.
mrschwarz said:
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
Click to expand...
Click to collapse
what holster were u using
GuySparkz said:
what holster were u using
Click to expand...
Click to collapse
I bought the Seidio case and holster combo kit.
any leather belt clips that are confirmed to work with the hd2, tmo version? Im sure for a leather belt clip it will fit both, but i have yet to find one that is made for the hd2. the previous htc version for the TP2 is too thick and not wide enough for it to fit.
any suggestions?
well i bought one for 19.99 from best buy buy the name rocketfish and it fit the phone perfectly and so far the best one i have found as of now
cool. ill check it out
I was at my local Best Buy yesterday and they had nothing that met my standards. They did have a HTC Branded horizontal belt pouch that it fit great for the size, however the pouch itself was 3 times thinker then needed. I am picky with my pouches and belt clips for my phones. I do have my Invisible shield and a few Silicon sleeves coming soon so I may try some over pouches out when I get my new stuff.
tmobile stores have a generic one for the g1 & sidekick that works pretty well.
Holster
anyone tried/played with/other this one?
http://www.thepocketsolution.com/PSI-60820/HTC+HD2+Black+Diplomat+Leather+Case.html
A bit pricey, but seems like a nice slim fit ...
HTC D2 carrying cases
I found two leather carrying case for HTC D2 wirelessemporium.com has one it called premium horizontal black leather carrying case for htc Hd2 Item# LOC-HTC-OHD2-01 free shipping price 15.29 and I found a outdoor style carrying case HTC HD2 from cellphoneshop.com with shipping and handling 9.58 I got both and like the leather one so go get it and good luck
I picked up a T-mobile Wing leather pouch/belt clip for $5 on clearance at the store the day the phone was released. Works great for me and the case seems to be higher quality than a few others I have had.
Been using the old sidekick pouch myself. For about 2 years. HD2 fits in, but is far too snug. Pouch is raggedy anyway...
PDAir has some nice cases for HD2.
I use this one for T-Mobile HD2
I'm also looking for a leather belt pouch. I got a generic one (it's actually the one being offered in most online stores by default) that doesn't exactly fit the phone. Looks to be for a squatter, fatter device, but it stretches enough to fit an HD2.
What I'd like is a agenda-like one where the device is held inside by the corners, with a bottom access for the 3.5mm at least, a side access to the rocker switch, and a magnetic (or velcro, I'm willing to compromise) flap that secures the device.
If my dad were still alive we'd make a killing making those kind of cases and selling them here. Best leather worker ever. Sniff sniff...
well i just put these 2 items for shipping , lets see how good they are . Its just about 15 on both items ( with shipping )
netimes . com/shop/vertical-leather-case-for-htc-hd2-nokia-e61-universal-p-2409.html?cPath=80_731
netimes . com/shop/horizontal-case-for-htc-hd2-nokia-e61-universal-p-2432.html?cPath=80_731